频率范围:10MHz至6GHz
2TX,2RX
瞬时带宽:160 MHz
GPS驯化时钟精度:5ppb
Intel Core i7处理器
ONETEST 欢迎您
频率范围:10MHz至6GHz
2TX,2RX
瞬时带宽:160 MHz
GPS驯化时钟精度:5ppb
Intel Core i7处理器
10 MHz ~ 6 GHz,x86处理器,GPS驯服的OCXO,USRP软件无线电独立式设备
USRP-2974基于LabVIEW可重配置I/O(RIO)架构,搭载运行NI Linux实时操作系统的板载Intel Core i7处理器。 USRP-2974是一款独立运行的USRP软件无线电设备,这意味着您可以使用LabVIEW通信系统设计套件在板载处理器上确定地执行处理。 USRP-2974设备均配备了GPS驯服的10 MHz恒温晶体振荡器(OCXO)参考时钟。 该设备适用于对一系列高级研究应用进行原型验证,其中包括独立的LTE或802.11设备仿真; 介质访问控制(MAC)算法的开发; 多输入多输出(MIMO); 异构网络; LTE中继; 射频压缩采样; 频谱感测; 认知无线电;波束形成和测向。\n\n 注册商标Linux®的使用获得了Linus Torvalds专属授权商LMI的再授权,Linus Torvalds拥有Linux®注册商标在全球范围内的所有权。
产品编号: 785606-01
Specifications are valid at 25 °C unless otherwise noted. If you need to clean the module, wipe it with a dry towel. Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient temperature) Pollution Degree 2 Indoor use only. Operating temperature 0 °C to 50 °C Relative humidity range 10% to 90%, noncondensingConditions
Controller
System on module (SoM) Congatec COM Express conga-TS170 CPU Intel Core i7 6822EQ (2 GHz Quad Core) Memory[1] SO-DIMM DDR4 16 GB NVMe SSD[2] 500 GB SFP+[3] 10G ETH connection to the SoM Cabled PCIe PCIe Gen 2 x 4 MicroUSB[4] USB-to-UART to the SoM RJ45 1G ETH host connection FPGA and Baseband
FPGA Kintex-7 XC7K410T DRAM 1 GB Baseband analog-to-digital converter (ADC) resolution 14 bit Baseband digital-to-analog converter (DAC) resolution 16 bit Maximum I/Q sample rate 200 MS/s SFP+[5] High speed serial link to one of the FPGA GTX transceivers RF
Transmitter
Number of channels 2 Frequency range 10 MHz to 6 GHz Frequency step <1 kHz Maximum output power (Pout), 10 MHz to 4 GHz 50 mW to 100 mW (17 dBm to 20 dBm) Maximum output power (Pout), 4 GHz to 6 GHz 5 mW to 50 mW (7 dBm to 17 dBm) Gain range[6] 0 dB to 31.5 dB Gain step 0.5 dB Maximum instantaneous real-time bandwidth[7] 160 MHz Receiver
Number of channels 2 Frequency range 10 MHz to 6 GHz Frequency step <1 kHz Gain range[8] 0 dB to 37.5 dB Gain step 0.5 dB Maximum input power (Pin) -15 dBm Noise figure 5 dB to 7 dB Maximum instantaneous real-time bandwidth[9] 160 MHz GPS Disciplined Oscillator (GPSDO)
NoteFrequency accuracy is based on oven-controlled crystal oscillator (OCXO) vendor specifications and is not measured. Alternatively, you can incorporate an external reference source to provide a more precise frequency Reference Clock and to achieve better frequency accuracy.OCXO (not locked to GPS) 25 ppb OCXO (locked to GPS) 5 ppb
NoteNI recommends periodically locking the GPS for at least 1 hour to recalibrate the GPSDO module accuracy.Voltage 5 V Power 0.7 W Power
NoticeThe power supply must also meet any safety and compliance requirements for the country of use.NoteNI recommends using the USRP-2974 with the provided power supply (Power Supply, part number 723613-01). Contact NI if a replacement is needed.Voltage range 14.25 V to 15.75 V Current 10 A, maximum Power 150 W, maximum Physical Characteristics
(L × W × H) 29.08 cm × 21.84 cm × 7.98 cm (11.45 in. × 8.60 in. × 3.14 in.) Weight 3.34 kg (7.35 lb) Environment
Operating Environment
1 Module assembly A has a memory of 8 GB. All other module assemblies have a memory of 16 GB.
2 Module assembly A has an NVMe SSD of 250 GB. All other module assemblies have an NVMe SSD of 500 GB.
3 Can be bypassed to the FPGA.
4 Device port for external host.
5 Can be bypassed to the SoM if using the 10 GbE as protocol.
6 The output power resulting from the gain setting varies over the frequency band and among devices.
7 The USRP-2974 transmitter path has 160 MHz of bandwidth throughout the full frequency range of the device.
8 The received signal amplitude resulting from the gain setting varies over the frequency band and among devices.
9 The USRP-2974 receiver path has 84 MHz of bandwidth for center frequencies from 10 MHz to 500 MHz.
0条提问
X
提问
X
回答
发表口碑
© 2024 Onetest仪器资源库 All Rights Reserved 粤ICP备17028186号-2 粤公网安备44030902003758