ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
⚫工作频率：26.5GHz~40GHz⚫增益：≥40dB⚫输出CW饱和功率：≥10W⚫带内增益平坦度：≤±3dB⚫输入驻波：≤2⚫谐波抑制：≥20dBc⚫输入接口:波导⚫输出接口:波导⚫供电：220VAC⚫工作温度：-10℃ ～+40℃
宽带宽：100 kHz 至 20GHz反极性保护过压/欠压保护+28dBm（典型值） 输出功率 @ P1dB紧凑且易于使用，带有专用电源
用固态设计方案频率覆盖4K-40GHz功率等级高达10000W满足现有EMC标准中绝大多数应用场合双定向耦合器+高精度功率计实时监测并显示输出端的正反向功率及输出驻波
同厂商产品
AMPS-30B20 是松田精密（Matsusada Precision）AMPS 系列的一款放大器，最大输出电压 30kV，最大输出电流 40mA，最大输出功率 600W。 The AMPS series is a line of high-performance High Voltage Amplifiers offering an exceptional ultra-high-speed response with a slew rate of 1200 V/μs.
AMPS-2B200 是松田精密（Matsusada Precision）AMPS 系列的一款放大器，最大输出电压 2kV，最大输出电流 400mA，最大输出功率 400W。 The AMPS series is a line of high-performance High Voltage Amplifiers offering an exceptional ultra-high-speed response with a slew rate of 1200 V/μs.
AMPS-20B20 是松田精密（Matsusada Precision）AMPS 系列的一款放大器，最大输出电压 20kV，最大输出电流 60mA，最大输出功率 400W。 The AMPS series is a line of high-performance High Voltage Amplifiers offering an exceptional ultra-high-speed response with a slew rate of 1200 V/μs.
- «
- 1
- »
AMPS-10B40 10kV/120mA功率放大器 400W|松田精密 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
AMPS-10B40 放大器
Ultra Fast Response High-Voltage Amplifier 10kV / 120mA / 400W
产品简介
AMPS-10B40 是松田精密（Matsusada Precision）AMPS 系列的一款放大器，最大输出电压 10kV，最大输出电流 120mA，最大输出功率 400W。
The AMPS series is a line of high-performance High Voltage Amplifiers offering an exceptional ultra-high-speed response with a slew rate of 1200 V/μs. This series includes models up to ±30 kV as well as high-current models capable of delivering a 4 A peak current at ±0.6 kV, accommodating a wide variety of load conditions. All models feature true four-quadrant operation (bipolar power supply), enabling both power sourcing and sinking. This makes them ideal for cutting-edge R&D applications requiring precise waveform output, such as ion beam and electron beam deflection in semiconductor manufacturing equipment, and various material and dielectric strength tests. The series combines the high reliability synonymous with Matsusada Precision with a compact and sophisticated design for easy integration into laboratories and systems.
±10 kV and ±20 kV models have achieved a twofold increase in response speed, reaching a slew rate of 1200 V/μs. Laser modulation and beam deflection at unprecedented high speed are possible.
The 100 kHz frequency bandwidth under actual load conditions resolves the common issue of a slowed response time in real-world operation.
Ideal for high-speed beam steering and advanced material evaluation testing.
核心参数
• Output voltage [kVdc]：-10 to +10 kV
• 输出电流：±40 mA max or
±120 mA pk 1 ms
• Rated output power [W]：400 W
• Slew rate [V/µs]：1200 V/µs
• Frequency response
(Typical value at sine wave operation
with resistive load) / Full scale [-1 dB] *：DC to 20 kHz
• Small bandwidth
(10% of full scale) [-3 dB]：DC to 40 kHz
• 输入电压：230 Vac ±10% (207 to 253 Vac), 50/60 Hz, Single-phase
• 输出电压控制：External control voltage -10 to +10 V (DC or peak AC)
• -LC：Current Limit *
The output does not turn off; instead, the current is limited, causing the output voltage to drop when the overcurrent level is reached.
• -LCc：Adjustable current limit level *
The output does not turn off; instead, the current is limited, causing the output voltage to drop when the overcurrent level is reached. Using the potentiometer on the front panel, the limit current value can be adjusted in the range of 10% to 105% of the rating.
• -LCx：Adjustable current trip level + Variable current limit level *
Both of -LOc (adjustable current trip level) and -LCc (adjustable current limit level) are switchable.
• -LN：Output state auto-recovery (former: no power failure protection)
资源下载
以上内容与指标均取自Matsusada Precision 官网产品页与官方数据手册，未标注口径的为厂家公布值。
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
AMPS-10B40 放大器 详细指标
Ultra Fast Response High-Voltage Amplifier 10kV / 120mA / 400W
详细指标
以下指标取自松田精密（Matsusada Precision）官网 AMPS 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• Output voltage [kVdc]：-10 to +10 kV
• 输出电流：±40 mA max or
±120 mA pk 1 ms
• Rated output power [W]：400 W
• Slew rate [V/µs]：1200 V/µs
• Frequency response
(Typical value at sine wave operation
with resistive load) / Full scale [-1 dB] *：DC to 20 kHz
• Small bandwidth
(10% of full scale) [-3 dB]：DC to 40 kHz
系列共用规格
• 输入电压：230 Vac ±10% (207 to 253 Vac), 50/60 Hz, Single-phase
• 输出电压控制：External control voltage -10 to +10 V (DC or peak AC)
• -LC：Current Limit *
The output does not turn off; instead, the current is limited, causing the output voltage to drop when the overcurrent level is reached.
• -LCc：Adjustable current limit level *
The output does not turn off; instead, the current is limited, causing the output voltage to drop when the overcurrent level is reached. Using the potentiometer on the front panel, the limit current value can be adjusted in the range of 10% to 105% of the rating.
• -LCx：Adjustable current trip level + Variable current limit level *
Both of -LOc (adjustable current trip level) and -LCc (adjustable current limit level) are switchable.
• -LN：Output state auto-recovery (former: no power failure protection)
• -LOc：Adjustable current trip level *
Using the potentiometer on the front panel, the limit level to turn off the output current can be adjusted in the range of 10% to 105% of the rating.
• -L(5m)：High voltage output cable 5 meters length (more than 2 kV models)
When using a cable 5 meters in length, phenomena such as reduced slew rate, slower response speed, or output waveform distortion are more likely to occur. Please use this configuration with caution. For details, please refer to " For capacitive load and discharge load ".
• Input cable (Included accessories)：400 W and 600 W models
CABLE TYPE3
250 V
2.5 meters
1200 W models
CABLE TYPE5
250 V
2.5 meters
• Output cable (Included accessories)：Less than 0.6 kV models
Using terminal block output line 1.5 meters length
High Voltage output cable 1.5 meters length
2 kV to 10 kV models
CN-40-AHVP
High Voltage output cable 1.5 meters length
2 kV to 10 kV models with -L(5m) option
CN-40-AHVP(5)
High Voltage output cable 5 meters length
AMPS-20B20
CN-40-AHVP TU
High Voltage output cable 1.5 meters length
AMPS-20B20 with -L(5m) option
CN-40-AHVP TU(5)
High Voltage output cable 5 meters length
AMPS-30B20
CN-50-AHVP
High Voltage output cable 3 meters length
选件 / 附件
• -LC：Current Limit *
The output does not turn off; instead, the current is limited, causing the output voltage to drop when the overcurrent level is reached.
• -LCc：Adjustable current limit level *
The output does not turn off; instead, the current is limited, causing the output voltage to drop when the overcurrent level is reached. Using the potentiometer on the front panel, the limit current value can be adjusted in the range of 10% to 105% of the rating.
• -LCx：Adjustable current trip level + Variable current limit level *
Both of -LOc (adjustable current trip level) and -LCc (adjustable current limit level) are switchable.
• -LN：Output state auto-recovery (former: no power failure protection)
• -LOc：Adjustable current trip level *
Using the potentiometer on the front panel, the limit level to turn off the output current can be adjusted in the range of 10% to 105% of the rating.
• -L(5m)：High voltage output cable 5 meters length (more than 2 kV models)
When using a cable 5 meters in length, phenomena such as reduced slew rate, slower response speed, or output waveform distortion are more likely to occur. Please use this configuration with caution. For details, please refer to " For capacitive load and discharge load ".
• Input cable (Included accessories)：400 W and 600 W models
CABLE TYPE3
250 V
2.5 meters
1200 W models
CABLE TYPE5
250 V
2.5 meters
• Output cable (Included accessories)：Less than 0.6 kV models
Using terminal block output line 1.5 meters length
High Voltage output cable 1.5 meters length
2 kV to 10 kV models
CN-40-AHVP
High Voltage output cable 1.5 meters length
2 kV to 10 kV models with -L(5m) option
CN-40-AHVP(5)
High Voltage output cable 5 meters length
AMPS-20B20
CN-40-AHVP TU
High Voltage output cable 1.5 meters length
AMPS-20B20 with -L(5m) option
CN-40-AHVP TU(5)
High Voltage output cable 5 meters length
AMPS-30B20
CN-50-AHVP
High Voltage output cable 3 meters length
资源下载
以上规格取自松田精密（Matsusada Precision）官网 AMPS 系列产品页（https://www.matsusada.com/product/high-voltage-amplifiers/high-voltage-amplifiers/amps/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
松田精密官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售模式
Matsusada Precision Inc. 全球直销，不设授权代理商（官方 FAQ 明示 direct sales system）
• 全球咨询 +81-6-6150-5088
• 传真 +81-6-6150-5089
• 在线询价
https://www.matsusada.com/support/contact/
• 官网 https://www.matsusada.com/
全国办事处
美国办事处（北卡罗来纳）
• 电话 +1 (704) 496-2644
• 传真 +1 (704) 496-2643
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758