ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
用固态设计方案频率覆盖4K-40GHz功率等级高达10000W满足现有EMC标准中绝大多数应用场合双定向耦合器+高精度功率计实时监测并显示输出端的正反向功率及输出驻波
基于LDMOS/GaN/GaAs 线性化固态设计可选配反射/过温/过流保护电路单元优异可靠性和稳定性频率覆盖4K-110GHz最大输出功率设计能力可达单模块1000瓦
基于LDMOS/GaN/GaAs 线性化固态设计可选配反射/过温/过流保护电路单元内置双定向耦合器及高精度功率计具有高动态及高精度的输出功率显示、输出驻波显示、增益可调、远程控制等功能优异可靠性和稳定性频率覆盖4K-110GHz最大输出功率设计能力可达10000瓦。
同厂商产品
DOP60-10 是松田精密（Matsusada Precision）DOP 系列的一款放大器，最大输出电压 60V，最大输出电流 10A，最大输出功率 600W。 The DOP series is a high-speed, four-quadrant bipolar power supply designed for high-power applications.
DOP6-120 是松田精密（Matsusada Precision）DOP 系列的一款放大器，最大输出电压 6V，最大输出电流 120A，最大输出功率 720W。 The DOP series is a high-speed, four-quadrant bipolar power supply designed for high-power applications.
DOP500-2.5 是松田精密（Matsusada Precision）DOP 系列的一款放大器，最大输出电压 500V，最大输出电流 2.4A，最大输出功率 1.2kW。 The DOP series is a high-speed, four-quadrant bipolar power supply designed for high-power applications.
- «
- 1
- »
DOP5-60 5V/60A功率放大器 300W|松田精密 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
DOP5-60 放大器
FOUR-QUADRANT FAST RESPONSE 双极性 AMPLIFIER 5V / 60A / 300W
产品简介
DOP5-60 是松田精密（Matsusada Precision）DOP 系列的一款放大器，最大输出电压 5V，最大输出电流 60A，最大输出功率 300W。
The DOP series is a high-speed, four-quadrant bipolar power supply designed for high-power applications. It operates in both Constant Voltage (CV) and Constant Current (CC) modes. By adopting an aluminum chassis, the unit achieves a lightweight design, weighing approximately half as much as conventional models.
These compact, high-speed amplifiers generate output signals proportional to various input waveforms, including sine, triangular, sawtooth, and square waves.
The DOP series is ideal for driving inductive loads (coils and transformers) and capacitive loads (capacitors), as well as for testing DC servo motors, automotive electrical components, and surface treatment applications.
All models are fully solid-state, with output voltages ranging from ±5 V to ±300 V.
Note: This product is not designed for battery charging and discharging cycles.
For battery charge/discharge applications, please refer to the Battery Cycle Tester product page.
核心参数
• 最大输出电压：±5 V
• 电流：±60 A
• 功率：300 W
• 频率响应 (-3 dB)：DC to 20 kHz
• 输入电压：100 to 120 Vac, 50/60 Hz, Single-phase (150/300/350 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (600/700/720/1200/2000 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (150/300/350 W models option)
• 输出控制：[External control signal] Vcon-in, Input voltage -10 to +10 V
[Front panel] DC bias: 10-turn potentiometer with -100% to +100% setting
功能特性
• 过压保护 (OVP)：DOP series is equipped with overvoltage protection, which protects the load by limiting voltage up to approx. 110% of the rated output voltage even at abnormal conditions. * -LVc option (output voltage limiter) enables control of the output in 0 to approx 110% range.
• 过流保护 (OCP)：DOP series is also equipped with overcurrent protection, which protects power supplies and load by limiting current up to approx. 110% of the rated output current. * -LCc option (output current limiter) enables control of the output in 0 to approx 110% range.
• 高速过流保护：DOP series is provided with 2 types of overcurrent protections: high-speed overcurrent protection to limit the pulse current and standard overcurrent protection to limit the static current. The standard overcurrent protection limits the static current, responding at around 1 ms. Additional high-speed overcurrent protection can limit the pulse current of square waveforms or from capacitors to appro
• Output range：DOP series is a bipolar power supply that can perform four-quadrant operations. They can supply (source) and absorb (sink) current in the field of the drawing on the right.
• CV/CC setting selection：Inputting voltage via Vcon-in enables the control of output voltage V when CV control is selected and output current A when CC control is selected. in CV mode in CC mode Vcon Output voltage Output current -10 V -Rating -Rating 0 V 0 V 0 A +10 V +Rating +Rating
• Use of BIAS：When the "BIAS ON/OFF switch" is flipped to ON, bias can be changed with the "BIAS setting dial." Bias of the voltage can be set when CV control is selected, and that of the current can be when CC control is selected. in CV mode in CC mode Scale Output voltage Output current 000 (ccw) -Rating -Rating 500 0 V 0 A 1000 (cw) +Rating +Rating
资源下载
以上内容与指标均取自Matsusada Precision 官网产品页与官方数据手册，未标注口径的为厂家公布值。
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
DOP5-60 放大器 详细指标
FOUR-QUADRANT FAST RESPONSE 双极性 AMPLIFIER 5V / 60A / 300W
详细指标
以下指标取自松田精密（Matsusada Precision）官网 DOP 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• 最大输出电压：±5 V
• 电流：±60 A
• 功率：300 W
• 频率响应 (-3 dB)：DC to 20 kHz
系列共用规格
• 输入电压：100 to 120 Vac, 50/60 Hz, Single-phase (150/300/350 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (600/700/720/1200/2000 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (150/300/350 W models option)
• 输出控制：[External control signal] Vcon-in, Input voltage -10 to +10 V
[Front panel] DC bias: 10-turn potentiometer with -100% to +100% setting
选件 / 附件
• -LCc：Output current limit
Variable from 0 to approx 110% with front panel dial
• -LF：Floating ground (withstand voltage 200 Vdc)
• -LMsm: Master machine for master-slave control
-LMss: Slave machine for master-slave control：By connecting a master machine and a slave machine with dedicated control lines, the master machine can control all slave machines at once. Parallel connection can increase the current that is insufficient for a single operation. Up to three units in total can be connected: one master unit and up to two slave units.
Note: Precautions for using the master-slave operation
Only the master-slave connection is available for the same model.
In parallel operation, the frequency range is narrower.
It can also operate on a single.
Factory adjustment is required when changing the master-slave combination.
• -LN：Output state auto-recovery (former: no power failure protection)
This option retains the output state when recovering from an input power interruption, such as an AC power switch ON/OFF or a power failure. Therefore, there is no need to reset the protection status by turning off the OUTPUT switch once.
Caution: If you turn on the power while the OUTPUT setting is ON, the output will be ON.
• -LPr：rms display
• -LVc：Output voltage limit
Variable from 0 to approx 110% with front panel dial
• -L(220V)：200 Vac to 240 Vac ±10% single-phase, 50 Hz/60 Hz input
(150 W models and 300 W to 350 W models only)
资源下载
以上规格取自松田精密（Matsusada Precision）官网 DOP 系列产品页（https://www.matsusada.com/product/low-voltage-amplifiers/bipolar-amplifiers/dop/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
松田精密官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售模式
Matsusada Precision Inc. 全球直销，不设授权代理商（官方 FAQ 明示 direct sales system）
• 全球咨询 +81-6-6150-5088
• 传真 +81-6-6150-5089
• 在线询价
https://www.matsusada.com/support/contact/
• 官网 https://www.matsusada.com/
全国办事处
美国办事处（北卡罗来纳）
• 电话 +1 (704) 496-2644
• 传真 +1 (704) 496-2643
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758