ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
仪器资源库

严选商城

搜索

AI问答与智能搜索
二维码
请完成安全验证
产品库 严选商城

    类似产品

    10G万兆以太网测试仪 高性能款

    PNA-X系列N5247B 67GHz 网络分析仪|是德科技 (在产)

    参考价格 ：

    厂家：是德科技|KEYSIGHT （收录1433个产品）

    产地：美国

    点击访问厂家官网

    产品描述
    详细指标
    软件和手册|白皮书
    购买渠道
    选件
    问大家
    视频
    测评
    口碑
    系统与解决方案

    是德科技|KEYSIGHT
    XN8 系列矢量网络分析仪，最低频率 900 Hz，最高频率 67 GHz
    台式矢量网络分析仪
    产品简介
    N5247B PNA-X 网络分析仪是理想的射频测试系统，具有稳健的架构、多样的配置选项和丰富的测试软件应用
    核心参数
    • 最高频率：67 GHz
    • 内置端口数：2, 4
    • 最大源数量：3
    • 集成低噪声接收机：1
    功能特性
    • 追求无与伦比的卓越
    Keysight N5247B PNA-X 微波网络分析仪提供全球最通用、最全面集成的微波测试平台。
    PNA-X 硬件专注于表征放大器、混频器和变频器等有源器件，包含双内部信号源、信号合路器、S 参数和噪声接收机、
    脉冲调制器和发生器，以及一组开关和射频接入点。
    硬件集成提供广泛的线性和非线性测量能力，所有这些都可通过对被测件（DUT）的单组连接访问。
    N5247B 网络分析仪覆盖 10 MHz 至 67 GHz 的频率范围，平衡速度与性能以优化您的测试系统。
    通过用一台 PNA-X 网络分析仪替代整个机架设备来简化测试设置；
    借助无与伦比的单连接测量软件应用种类减少测试时间；
    利用先进误差修正技术实现高精度的线性和非线性器件表征；
    从业界最广泛的测量应用中选择，兼顾速度、精度和用户友好性；
    先进射频测试；使用多点触控显示屏和直观用户界面加速洞察组件行为
    资源下载
    以上内容与指标均取自是德科技（KEYSIGHT）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
    是德科技|KEYSIGHT · onetest 仪器资源库

     

     

    是德科技 | KEYSIGHT
    PNA-X系列N5247B 67GHz 网络分析仪　详细指标
    Benchtop Vector Network Analyzers
    一、技术规格
    Documentation Warranty
    条件：USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED HEREIN.
    THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
    THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO
    BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM
    EXTENT PERMITTED BY APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER
    EXPRESS OR IMPLIED WITH REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED
    HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
    AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT SHALL NOT BE LIABLE FOR ERRORS
    OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING,
    SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH
    WARRANTY TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH
    U.S. Government Rights
    条件：Rights as defined in FAR 27.401 or DFAR 227.7103-5 (c), as applicable in any technical data.
    U.S. Government Rights. The Software is “commercial computer software,” as defined by Federal
    Acquisition Regulation (“FAR”) 2.101. Pursuant to FAR
    12.212 and 27.405-3 and Department of Defense
    FAR Supplement (“DFARS”)
    227.7202, the U.S. government acquires commercial computer software
    under the same terms by which the software is customarily provided to the public. Accordingly, Keysight
    provides the Software to U.S. government customers under its standard commercial license, which is
    embodied in its End User License Agreement (EULA), a copy of which can be found at
    which the U.S. government may use, modify, distribute, or disclose the Software. The EULA and the
    license set forth therein, does not require or permit, among other things, that Keys ight: (1) Furnish
    technical information related to commercial computer software or commercial computer software
    documentation that is not customarily provided to the public; or (2) Relinquish to, or otherwise provide,
    the government rights in excess of these rights customarily provided to the public to use, modify,
    reproduce, release, perform, display, or disclose commercial computer software or commercial computer
    software documentation. No additional government requirements beyond those set forth in the EULA
    shall apply, except to the extent that those terms, rights, or licenses are explicitly required from all
    providers of commercial computer software pursuant to the FAR and the DFARS and are set forth
    specifically in writing elsewhere in the EULA. Keysight shall be under no obligation to update, revise or
    otherwise modify the Software. With respect to any technical data as defined by FAR
    2.101, pursuant to
    FAR 12.211 and 27.404.2 and DFARS
    227.7102, the U.S. government acquires no greater than Limited
    Table of Contents
    条件：Table 48. Power Level Accuracy (dB) at Nominal Power1, All Options .............................................. 58
    Table 62. Nominal Power (Preset Power, dBm) ................................................................................. 67
    Table 66. Non-Harmonic Spurs1 at Nominal Power (dBc), All Options, All Ports – Typical ............... 68
    Phase Noise with Option UNY (Typical) ............................................................................................. 71
    Phase Noise with Option UNY (Supplemental Performance Data) .................................................... 71
    Phase Noise, CW 10 GHz, with Option UNY and without Option UNY (Typical) ............................... 72
    Table 98. Single-Channel Residual Phase Noise Sensitivity (dBc/Hz), with Option UNY in Best mode -
    Table 99. Single-Channel Residual AM Noise Sensitivity (dBc/Hz), with Option UNY in Best mode -
    Table 102. 2-Channel Residual Phase Noise Sensitivity (dBc/Hz) with Option UNY in Best mode -
    Table 103. 2-Channel Residual AM Noise Sensitivity (dBc/Hz) with Option UNY in Best mode -
    Option 201, 2-port standard test set (includes six front-panel access loops) and power range.
    Documentation Warranty ...........................................................................................................................
    2
    U.S. Government Rights .............................................................................................................................
    2
    Definitions....................................................................................................................................................
    10
    Dynamic Range ...........................................................................................................................................
    12
    System Dynamic Range ..........................................................................................................................
    13
    Table 1. System Dynamic Range at Test Port (dB), Options 201 or 401 ...........................................
    13
    Table 2. System Dynamic Range at Test Port (dB), Options 219 or 419 ...........................................
    14
    Table 3. System Dynamic Range at Test Port (dB), Option 224 ........................................................
    15
    Table 4. System Dynamic Range at Test Port (dB), Options 224 or 423 ...........................................
    16
    Table 5. System Dynamic Range at Test Port (dB), Options 224 or 423 with 029 or E29 1 ................
    17
    Table 6. System Dynamic Range at Test Port (dB), Option 425 ........................................................
    18
    Table 7. System Dynamic Range at Test Port (dB), Option 425 (LFE Enabled) ................................
    19
    Table 8. System Dynamic Range at Test Port (dB), Option
    425 (LFE Enabled), Combine Mode -
    Typical .................................................................................................................................................
    19
    Table 9. System Dynamic Range at Test Port (dB), Option 425 with 029 or E29 - Specification ......
    20
    Table 10. System Dynamic Range at Test Port (dB), Option 425 with 029 or E29 - Typical .............
    21
    Extended Dynamic Range ......................................................................................................................
    22
    Table 11. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical ........................
    22
    Table 12. Extended Dynamic Range at Direct Receiver Access Input (dB) – Typical .......................
    23
    Table 13. Extended Dynamic Range at Direct Receiver Input (dB) - Typical ....................................
    24
    Table 14. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical ........................
    25
    Table 15. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical ........................
    26
    Receiver Dynamic Range .......................................................................................................................
    27
    Table 16. Receiver Dynamic Range (dB), All Options ........................................................................
    27
    Table 17. Receiver Dynamic Range (dB), All Ports, Option 425 (LFE Enabled) ................................
    27
    Corrected System Performance, All Options ..............................................................................................
    28
    Table 18. 85058B Calibration Kit ........................................................................................................
    28
    Transmission Uncertainty ....................................................................................................................
    29
    Reflection Uncertainty .........................................................................................................................
    30
    Table 19. 85058B Calibration Kit, LFE Enabled (Option 425) ............................................................
    31
    Transmission Uncertainty, Option 425 ................................................................................................
    31
    Reflection Uncertainty, Option 425 .....................................................................................................
    31
    Table 20. N4694A Calibration Kit ........................................................................................................
    32
    Transmission Uncertainty ....................................................................................................................
    32
    Reflection Uncertainty .........................................................................................................................
    33
    Table 21. N4694A Calibration Kit, LFE Enabled (Option 425) ............................................................
    34
    Transmission Uncertainty, Option 425 ................................................................................................
    34
    Reflection Uncertainty, Option 425 .....................................................................................................
    34
    Table 22. N4694D Calibration Kit........................................................................................................
    35
    Transmission Uncertainty ....................................................................................................................
    35
    Reflection Uncertainty .........................................................................................................................
    36
    Table 23. N4694D Calibration Kit, LFE Enabled (Option 425) ...........................................................
    37
    Transmission Uncertainty, Option 425 ................................................................................................
    37
    Reflection Uncertainty, Option 425 .....................................................................................................
    37
    Uncorrected System Performance ..............................................................................................................
    38
    Table 24. Uncorrected System Performance (dB), All Options, All Ports - Specification ...................
    38
    Table 25. Uncorrected System Performance (dB), All Options, All Ports - Typical ............................
    39
    Table 26. Noise Mode1 Uncorrected System Performance (dB), Option 029 or E29 - Specification .
    39
    Table 27. Noise Mode1 Uncorrected System Performance (dB), Option 029 or E29 - Typical ..........
    40
    Table 28. Uncorrected System Performance (dB), All Ports, Option
    425 (LFE Enabled) -
    Specifications ......................................................................................................................................
    40
    Table 29. Uncorrected System Performance (dB), All Ports, Option 425 (LFE Enabled) - Typical .....
    41
    Test Port Output ..........................................................................................................................................
    42
    Table 30. Frequency Information, All Options .....................................................................................
    42
    Table 31. Maximum Leveled Power (dBm), Options 201 or 401 ........................................................
    43
    Table 32. Maximum Leveled Power (dBm), Options 219 or 419 ........................................................
    44
    Table 33. Maximum Leveled Power (dBm), Options 224 or 423 ........................................................
    45
    Table 34. Maximum Leveled Power (dBm), Options 224 or 423, Combine Mode - Typical ...............
    46
    Table 35. Maximum Leveled Power (dBm), Option 224 .....................................................................
    47
    Table 36. Maximum Leveled Power (dBm), Options 224 or 423 with 029 or E291 ............................
    48
    Table 37. Maximum Leveled Power (dBm), Options
    224 or 423 with 029 or E291, Combine Mode-
    Typical .................................................................................................................................................
    49
    Table 38. Maximum Leveled Power (dBm), Noise Mode1, Options
    224 or 423 with 029 or E291 -
    Typical .................................................................................................................................................
    50
    Table 39. Maximum Leveled Power (dBm), Option 425 .....................................................................
    51
    Table 40. Maximum Leveled Power (dBm), Option 425, Combine Mode - Typical ............................
    52
    Table 41. Maximum Leveled Power (dBm), Port 1 and 2, Option 425 with 029 or E29 1 ....................
    53
    Table 42. Maximum Leveled Power (dBm), Port 3 and 4, Option 425 with 029 or E29 1 ....................
    54
    Table 43. Maximum Leveled Power (dBm), Option 425 with 029 or E29, Combine Mode - Typical ..
    55
    Table 44. Maximum Power (dBm), All Ports, Option
    425 with 029 or E29 (LFE Enabled), Combine
    Mode - Typical .....................................................................................................................................
    55
    Table 45. Maximum Leveled Power (dBm), Noise Mode1, Options 425 with 029 or E29 - Typical ....
    56
    Table 46. Maximum Power (dBm), All Ports – Option 425 and Option
    425 with 029 or E29 (LFE
    Enabled) ..............................................................................................................................................
    57
    Table 47. Typical Output Power Range of SRC3 on Rear Panel (dBm) - Option XSB1 .....................
    57
    Table 49. Power Level Accuracy (dB), All Ports, Option 425 and Option
    425 with 029 or E29 (LFE
    Enabled) ..............................................................................................................................................
    58
    Table 50. Power Level Linearity1 (dB), All Options - Specification .....................................................
    59
    Table 51. Power Level Linearity1 (dB), All Options - Specification .....................................................
    59
    Table 52. Power Level Linearity1 (dB), Option 224 - Specification .....................................................
    59
    Table 53. Power Level Linearity1 (dB), All Ports, Option 425 and Option
    425 with 029 or E29 (LFE
    Enabled) ..............................................................................................................................................
    59
    Table 54. Power Sweep Range (dB), Options 201 or 401 ..................................................................
    60
    Table 55. Power Sweep Range (dB), Options 219 or 419 ..................................................................
    61
    Table 56. Power Sweep Range (dB), Options 224 or 423 ..................................................................
    62
    Table 57. Power Sweep Range (dB), Option 224 ...............................................................................
    63
    Table 58. Power Sweep Range (dB), Options 224 or 423 with 029 or E291 ......................................
    64
    Table 59. Power Sweep Range (dB), Option 425 ...............................................................................
    65
    Table 60. Power Sweep Range (dB), Option 425 with 029 or E29.....................................................
    66
    Table 61. Power Sweep Range (dB) –Option 425 and Option 425 with 029 or E29 (LFE Enabled) .
    66
    Table 63. Power Resolution and Maximum/Minimum Settable Power, All Ports1 ..............................
    67
    Table 64. 2nd and 3rd Harmonics at Max Specified Power (dBc), All Options - Typical ......................
    67
    Table 65. 2nd and 3rd Harmonics at Max Specified Power (dBc), All Ports, Option
    425 (LFE Enabled) -
    Typical .................................................................................................................................................
    68
    Tracking Spurs (Linear Frequency Scale) ..........................................................................................
    69
    Tracking Spurs (Logarithmic Frequency Scale) ..................................................................................
    69
    Table 67. Phase Noise (dBc/Hz), All Options, with UNY, Port 1, 3, Src2Out1 - Typical ....................
    70
    Table 68. Phase Noise (dBc/Hz), All Options, with UNY, Port 2, 4, Src2Out2 - Typical ....................
    70
    Table
    69. Phase Noise (dBc/Hz), All Options, with UNY, All Ports – Supplemental Performance Data
    ............................................................................................................................................................
    70
    Table 70. Phase Noise (dBc/Hz), Option 425
    425 with 029 or E29, and with UNY, All Ports (LFE
    Enabled) - Typical ...............................................................................................................................
    72
    Table 71. Phase Noise (dBc/Hz), All Options, without UNY, All Ports - Typical .................................
    72
    Table
    72. Phase Noise (dBc/Hz), All Options, without UNY, All Ports – Supplemental Performance
    Data .....................................................................................................................................................
    72
    Test Port Input .............................................................................................................................................
    73
    Table 73. Noise Floor1 (dBm) @ 10 Hz IFBW, All Options, All Ports .................................................
    73
    Table 74. Test Port Noise Floor (dBm) @ 10 Hz IFBW Option 425 (LFE Enabled) ...........................
    73
    Table 75. 0.1 dB Compression, All Options, All Ports - Typical .........................................................
    74
    Table 76. 0.1 dB Compression, All Ports, Option 425 (LFE Enabled) - Typical .................................
    74
    Table 77. Compression, All Ports, Option 425 (LFE Enabled)- Specification .....................................
    74
    Table 78. Compression, All Ports - Specification ................................................................................
    75
    Table 79. Trace Noise1 Magnitude (dB rms) .......................................................................................
    75
    Table 80. Trace Noise1 Magnitude (dB rms), All Ports, Option 425 (LFE Enabled) ...........................
    76
    Table 81. Trace Noise1 Phase (deg rms) ............................................................................................
    76
    Table 82. Trace Noise1 Phase (deg rms), All Ports, Option 425 (LFE Enabled) ................................
    76
    Table 83. Reference Level - Specification ..........................................................................................
    77
    Table 84. Stability1 - Typical ................................................................................................................
    77
    Table 85. Stability1, Option 425 (LFE Enabled) - Typical....................................................................
    77
    Table 86. Damage Input Level - Specification ....................................................................................
    78
    Noise Receiver Input (Option 029 and E29 only)........................................................................................
    79
    Table 87. Noise Receiver Bandwidth ..................................................................................................
    79
    Table 88. Receiver Noise Figure (dB), Port 2, at 4 MHz BW, High Gain Setting, Option 029 ...........
    79
    Table 89. Receiver Noise Figure (dB), Port 2, at 4 MHz BW, High Gain Setting, Option
    425 with 029
    ............................................................................................................................................................
    79
    Table 90. Receiver Noise Figure (dB), Port 2, at 4 MHz BW, High Gain Setting, Option E29 ...........
    80
    Table 91. Receiver Noise Figure (dB), Port 2, at 4 MHz BW, High Gain Setting, Option
    425 with E29
    ............................................................................................................................................................
    80
    Table 92. Noise Figure Trace Noise1 (dB rms) at 4 MHz BW, All Gain Settings ................................
    80
    Table 93. Noise Receiver Linearity (dB) at 4 MHz BW - Specification ...............................................
    81
    Table 94. Noise Receiver Input Range, Option 029 - Specification....................................................
    81
    Table 95. Noise Receiver Input Range, Option E29 - Specification ...................................................
    81
    Phase Noise Measurement Performance (with S930317B phase noise measurement application) .........
    82
    Table
    96. Absolute Phase Noise Sensitivity (dBc/Hz), in Best mode - Supplemental Performance Data
    ............................................................................................................................................................
    82
    Table
    97. Absolute AM Noise Sensitivity (dBc/Hz), in Best mode - Supplemental Performance Data82
    Absolute Phase Noise Sensitivity (dBc/Hz) - Supplemental Performance Data .................................
    83
    Single-Channel Residual Noise Measurement ......................................................................................
    84
    Supplemental Performance Data ........................................................................................................
    84
    Supplemental Performance Data ........................................................................................................
    84
    Single-Channel Residual Phase Noise Sensitivity (dBc/Hz) - Supplemental Performance Data .......
    85
    Table
    100. Single-Channel Residual Phase Noise Sensitivity (dBc/Hz), without Option UNY in Best
    mode - Supplemental Performance Data ...........................................................................................
    86
    Table
    101. Single-Channel Residual AM Noise Sensitivity (dBc/Hz), without Option UNY in Best mode
    - Supplemental Performance Data ......................................................................................................
    86
    2-Channel Residual Noise Measurement for Non-Frequency Converting Devices ................................
    87
    Supplemental Performance Data ........................................................................................................
    87
    Supplemental Performance Data ........................................................................................................
    87
    2-Channel Residual Phase Noise Sensitivity (dBc/Hz) - Supplemental Performance Data ...............
    88
    Dynamic Accuracy ......................................................................................................................................
    89
    Table 104. Dynamic Accuracy - Specification .....................................................................................
    89
    Dynamic Accuracy, 900 Hz (LFE Enabled) - Specification .................................................................
    89
    Dynamic Accuracy, 10 MHz (LFE Enabled) - Specification ................................................................
    89
    Dynamic Accuracy, 100 MHz (LFE Enabled) - Specification ..............................................................
    90
    Dynamic Accuracy, 10 MHz ................................................................................................................
    90
    Dynamic Accuracy, 50 MHz ................................................................................................................
    90
    Dynamic Accuracy, 500 MHz ..............................................................................................................
    91
    Dynamic Accuracy, 1 GHz ..................................................................................................................
    91
    Dynamic Accuracy, 2 GHz ..................................................................................................................
    91
    Dynamic Accuracy, 20 GHz ................................................................................................................
    92
    Dynamic Accuracy, 26.5 GHz .............................................................................................................
    92
    Dynamic Accuracy, 35 GHz ................................................................................................................
    93
    Dynamic Accuracy, 40 GHz ................................................................................................................
    93
    Dynamic Accuracy, 50 GHz ................................................................................................................
    94
    Dynamic Accuracy, 60 GHz ................................................................................................................
    94
    Dynamic Accuracy, 67 GHz ................................................................................................................
    94
    Table 105. Test Port Input (Group Delay)1..........................................................................................
    95
    General Information ....................................................................................................................................
    96
    Table 106. Miscellaneous Information ........................................................................................................
    96
    Table 107. Front Panel Information, All Options .................................................................................
    96
    Table 108. Rear Panel Information, All Options ..................................................................................
    97
    Table 109. Analyzer Dimensions and Weight ...................................................................................
    100
    Regulatory and Environmental Information ...........................................................................................
    101
    Measurement Throughput Summary ........................................................................................................
    102
    Table 110. Cycle Time (ms) for Measurement Completion, All Options - Typical ............................
    102
    Table 111. Cycle Time (ms) for Full-Span Measurement Completion - Typical ...............................
    102
    Table 112. Cycle Time vs. IF Bandwidth - Typical ............................................................................
    103
    Table 113. Cycle Time (ms) vs. Number of Points - Typical .............................................................
    104
    Table 114. Data Transfer Time1 (ms) - Typical .................................................................................
    105
    Table 115. Typical Cycle Time for Amplifier Noise Figure Measurement (Option
    029 or E29 and
    S93029B) ..........................................................................................................................................
    106
    Table 116. Typical Cycle Time for Amplifier Gain Compression Measurement (Option S93086B) .
    106
    Table 117. Typical Cycle Time for Amplifier Swept Intermodulation Distortion Measurement (Option
    S93087B) ..........................................................................................................................................
    107
    Table 118. Typical Cycle Time for Converter Noise Figure Measurement (Option
    029 or E29 and
    S93029B) ..........................................................................................................................................
    107
    Table 119. Typical Cycle Time for Converter Measurement with SMC + Phase (Option S93083B)
    108
    Table 120. Typical Cycle Time for Converter Gain Compression Measurement (Option S93086B)
    108
    Table 121. Typical Cycle Time for Converter Swept Intermodulation Distortion Measurement (Option
    S93087B) ..........................................................................................................................................
    109
    Front-Panel Jumpers .................................................................................................................................
    110
    Table 122. Measurement Receiver Inputs (dBm) - Typical ..............................................................
    110
    Table 123. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical .................
    111
    Table 124. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical .................
    112
    Table 125. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical .................
    113
    Table 126. Source Outputs (dBm) - Typical ......................................................................................
    114
    Table 127. Source Outputs (dBm) - Typical ......................................................................................
    115
    Table 128. Coupler Inputs (dB) - Typical ..........................................................................................
    116
    Table 129. Damage Level .................................................................................................................
    117
    Test Set Block Diagrams ...........................................................................................................................
    118
    This is a complete list of the technical specifications for the N5247B PNA-X network analyzer with the
    following options (see block diagrams at the end of this document):
    Option 029 or E29, adds hardware and firmware for high-accuracy noise figure measurements. It
    requires Option 224
    423, or 425.
    Option 219 2-port standard test set (includes six front-panel access loops), power range, source and
    接收机 attenuators (extended 功率量程), 和 bias-tees
    Option 224 2-port standard test set (includes six front-panel access loops), power range, source and
    receiver attenuators (extended power range), internal second source, a combiner, mechanical switches
    to the
    2-port analyzer, and bias tees.
    Option 401 4-port standard test set (includes twelve front-panel access loops), power range, and an
    internal second source (Option
    080 recommended).
    Option 419
    4-port standard test set (includes twelve front-panel access loops), power range, internal
    second source (Option
    080 recommended), and source and receiver attenuators (extended power
    范围), 和 bias-tees
    Option 423 4-port standard test set (includes six front-panel access loops), power range, source and
    receiver attenuators (extended power range), internal second source, a combiner, mechanical switches
    to the
    4-port analyzer, and bias tees.
    Option 425 4-port configurable test set, source and receiver attenuators, internal second source
    combiner, mechanical switches, and low frequency extension (LFE), with or without dedicated
    50 GHz or 67 GHz noise receiver.
    This document provides technical specifications for the 85058B calibration kit, and the N4694A
    2-Port
    ECal module. Please download our free Uncertainty Calculator from
    Typical performance information between
    67 GHz and 70 GHz is shown in this document where
    available. The performance is degraded at particular frequencies in this range due to the modes of the
    1.85 mm connectors used in the analyzer, test port cables and adapters.
    For all tables in this document, the specified performance at the exact frequency of a break is the
    minutes after the instrument has been turned on
    条件：due to environmental conditions.
    Specification (spec.): Warranted performance. Specifications include guardbands to account for the
    expected statistical performance distribution, measurement uncertainties, and changes in performance
    Characteristic (char.): A performance parameter that the product is expected to meet before it leaves
    the factory, but that is not verified in the field and is not covered by the product warranty. A characteristic
    includes the same guardbands as a specification
    Typical (typ.): Expected performance of an average unit which does not include guardbands. It is not
    by the product warranty
    Supplemental performance data (SPD): A performance parameter that is tested on a minimal set of
    products during design validation. It does not include guardbands, and is not covered by the product
    Calibration: The process of measuring known standards to characterize a network analyzer's systematic
    (repeatable) errors
    Corrected (residual): Indicates performance after error correction (calibration). It is determined by the
    quality of calibration standards and how well "known" they are, plus system repeatability, stability, and
    Uncorrected (raw): Indicates instrument performance without error correction. The uncorrected
    性能 affects 稳定度校准
    条件：Standard: When referring to the analyzer, this includes no options unless noted otherwise.
    Standard and LFE measurements: With option 425, which adds low frequency extension (LFE)
    hardware, the LFE measurement range overlaps with the standard measurement range from 10 MHz to
    100 MHz. With LFE Enabled, measurements from 500 Hz to 100 MHz use LFE hardware. With LFE
    Disabled, measurements from 10 MHz to 100 MHz use standard hardware. To measure below
    10 MHz
    LFE must be enabled. All measurements above
    100 MHz use standard hardware, regardless of the LFE
    动态范围
    The specifications in this section apply for measurements made with the N5247B analyzer with the
    following conditions
    • 10 Hz IF bandwidth
    • 否平均 applied 至 data
    • Isolation calibration with an averaging factor of 8
    系统动态范围
    条件：3 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Table 1. System Dynamic Range at Test Port (dB), Options
    201 or 401
    Description Specification3 Typical
    Ports1, 2 1, 3 Ports1 2, 4 Ports1, 2 1, 3 Ports1 2
    4
    10 MHz to 50 MHz 87 87 96
    96
    50 MHz to 100 MHz 110 111 118
    119
    100 MHz to 500 MHz 117 117 131
    131
    500 MHz to 1 GHz 128 131 136
    139
    1 GHz to 2 GHz 131 132 138
    139
    2 GHz to 3.2 GHz 127 131 134
    138
    3.2 GHz to 10 GHz 131 130 139
    138
    10 GHz to 13.5 GHz 131 129 139
    137
    13.5 GHz to 16 GHz 131 129 138
    137
    16 GHz to 19 GHz 131 130 138
    138
    19 GHz to 24 GHz 131 130 138
    137
    24 GHz to 26.5 GHz 131 130 137
    137
    26.5 GHz to 30 GHz 122 122 130
    129
    30 GHz to 32 GHz 121 120 128
    128
    32 GHz to 35 GHz 121 120 128
    128
    35 GHz to 40 GHz 112 112 120
    120
    40 GHz to 43.5 GHz 117 118 125
    125
    43.5 GHz to 50 GHz 117 116 125
    125
    50 GHz to 60 GHz 115 114 124
    123
    60 GHz to 64 GHz 116 113 125
    124
    64 GHz to 67 GHz 117 114 126
    125
    67 GHz to 70 GHz -- -- 122
    121
    1 Either port can be used as the source port. Any other port can be used as the receiver port.
    2 System Dynamic Range measured in High Power Mode.
    条件：3 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Table 2. System Dynamic Range at Test Port (dB), Options
    219 or 419
    Description Specification3 Typical (dB)
    Ports1, 2 1, 3 Ports1 2, 4 Ports1, 2 1, 3 Ports1 2
    4
    10 MHz to 50 MHz 84 81 94
    93
    50 MHz to 100 MHz 109 111 118
    119
    100 MHz to 500 MHz 116 117 130
    131
    500 MHz to 1 GHz 128 131 137
    139
    1 GHz to 2 GHz 130 132 138
    139
    2 GHz to 3.2 GHz 127 130 134
    136
    3.2 GHz to 10 GHz 130 131 139
    138
    10 GHz to 13.5 GHz 127 127 137
    136
    13.5 GHz to 16 GHz 127 127 136
    136
    16 GHz to 19 GHz 126 126 134
    134
    19 GHz to 24 GHz 126 126 134
    134
    24 GHz to 26.5 GHz 128 127 134
    134
    26.5 GHz to 30 GHz 116 114 125
    124
    30 GHz to 32 GHz 115 114 124
    124
    32 GHz to 35 GHz 115 113 124
    123
    35 GHz to 40 GHz 107 106 116
    114
    40 GHz to 43.5 GHz 112 113 120
    121
    43.5 GHz to 50 GHz 108 108 119
    118
    50 GHz to 60 GHz 107 107 118
    117
    60 GHz to 64 GHz 107 109 118
    118
    64 GHz to 67 GHz 109 110 119
    119
    67 GHz to 70 GHz -- -- 114
    115
    1 Either port can be used as the source port. Any other port can be used as the receiver port.
    2 System Dynamic Range measured in High Power Mode.
    条件：2 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Table 3. System Dynamic Range at Test Port (dB), Option
    224
    Description Specification2 Typical (dB)
    Source 2 Out 11 Source 2 Out 2 Source 2 Out 11 Source 2 Out
    2
    10 MHz to 50 MHz 85 85 95
    95
    50 MHz to 100 MHz 106 108 116
    118
    100 MHz to 500 MHz 115 116 130
    132
    500 MHz to 1 GHz 129 132 137
    140
    1 GHz to 2 GHz 130 133 138
    141
    2 GHz to 3.2 GHz 125 130 132
    139
    3.2 GHz to 10 GHz 132 132 140
    141
    10 GHz to 13.5 GHz 133 132 140
    140
    13.5 GHz to 16 GHz 132 133 139
    141
    16 GHz to 19 GHz 131 131 139
    139
    19 GHz to 24 GHz 132 132 139
    139
    24 GHz to 26.5 GHz 130 131 137
    139
    26.5 GHz to 30 GHz 119 119 129
    129
    30 GHz to 32 GHz 119 118 127
    128
    32 GHz to 35 GHz 119 119 127
    128
    35 GHz to 40 GHz 111 111 119
    119
    40 GHz to 43.5 GHz 114 115 124
    125
    43.5 GHz to 50 GHz 114 115 124
    125
    50 GHz to 60 GHz 113 115 123
    123
    60 GHz to 64 GHz 113 114 124
    125
    64 GHz to 67 GHz 115 115 126
    126
    1 System Dynamic Range measured in High Power Mode.
    Table 4. System Dynamic Range at Test Port (dB), Options
    224 or 423
    Description Specification3 Typical
    Ports1
    2
    1, 3
    Ports1
    2, 4
    Ports1
    2
    1, 3
    Ports1
    2, 4
    Source 1 Port
    1
    Combine Mode
    条件：3 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Source 2 Port
    1
    Combine Mode 10 MHz to 50 MHz 88 88 96 96 81 81 50 MHz to 100 MHz 112 112 119 119 104 104 100 MHz to 500 MHz 119 118 132 132 113
    113
    500 MHz to 1 GHz 130 130 137 137 123
    123
    1 GHz to 2 GHz 131 131 138 138 125
    125
    2 GHz to 3.2 GHz 127 128 133 133 127
    127
    3.2 GHz to 10 GHz 132 132 139 139 128
    128
    10 GHz to 13.5 GHz 131 131 138 138 127
    127
    13.5 GHz to 16 GHz 130 130 137 137 127
    127
    16 GHz to 19 GHz 128 128 135 135 126
    126
    19 GHz to 24 GHz 128 128 134 134 124
    124
    24 GHz to 26.5 GHz 128 127 134 134 124
    124
    26.5 GHz to 30 GHz 119 119 126 126 112
    112
    30 GHz to 32 GHz 117 117 124 124 109
    109
    32 GHz to 35 GHz 116 116 123 123 110
    110
    35 GHz to 40 GHz 108 108 116 116 107
    107
    40 GHz to 43.5 GHz 112 110 120 117 108
    108
    43.5 GHz to 50 GHz 111 111 119 119 108
    108
    50 GHz to 60 GHz 108 108 117 117 105
    105
    60 GHz to 64 GHz 109 109 118 118 104
    104
    64 GHz to 67 GHz 109 109 118 118 103
    103
    1 Either port can be used as the source port. Any other port can be used as the receiver port.
    2 System Dynamic Range measured in High Power Mode.
    Table 5. System Dynamic Range at Test Port (dB), Options
    224 or 423 with 029 or E291
    Description Specification3 Typical
    Port 1 2 Port 2 Port 1 2 Port 2 Source 1 Port
    1
    Combine Mode
    条件：noise receiver switch is in normal position . 2 System Dynamic Range measured in High Power Mode. 3 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Source 2 Port
    1
    Combine Mode 10 MHz to 50 MHz 88 88 96 96 81 81 50 MHz to 100 MHz 113 113 119 120 104 104 100 MHz to 500 MHz 120 120 132 132 113
    113
    500 MHz to 1 GHz 131 132 137 139 123
    123
    1 GHz to 2 GHz 131 132 138 139 125
    125
    2 GHz to 3.2 GHz 127 130 134 137 127
    127
    3.2 GHz to 6 GHz 133 132 140 139 127
    127
    6 GHz to 10 GHz 132 131 138 137 127
    127
    10 GHz to 13.5 GHz 130 128 137 136 126
    126
    13.5 GHz to 16 GHz 130 130 137 136 127
    127
    16 GHz to 19 GHz 128 128 135 135 126
    126
    19 GHz to 24 GHz 127 127 134 134 124
    124
    24 GHz to 26.5 GHz 127 127 133 133 123
    123
    26.5 GHz to 30 GHz 118 118 125 125 111
    111
    30 GHz to 32 GHz 116 116 123 123 108
    108
    32 GHz to 35 GHz 116 116 123 123 109
    109
    35 GHz to 40 GHz 108 107 115 114 106
    106
    40 GHz to 43.5 GHz 112 111 119 119 106
    106
    43.5 GHz to 50 GHz 110 110 118 118 106
    106
    50 GHz to 60 GHz 107 107 116 116 103
    103
    60 GHz to 64 GHz 108 107 117 117 101
    101
    64 GHz to 67 GHz 108 108 117 117 101
    101
    1 Option 029 or E29 affects system dynamic range with port 1 or port 2 as the source port. Refer to Table
    4 for the system
    dynamic range with port 3 or port 4 as the source port. Port 1 impedance tuner switch is in bypass position and port
    2
    Table 6. System Dynamic Range at Test Port (dB), Option
    425
    Description Specification4 Typical
    Ports
    3
    1, 3
    Ports3
    2, 4
    Ports
    3
    1, 3
    Ports3
    2, 4
    Source 1 Port
    1
    Combine Mode
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 7.
    4 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Source 2 Port
    1
    Combine Mode 10 MHz to 50 MHz1 83 80 90 89 81 81 50 MHz to 100 MHz1 109 110 116 116 106 106 100 MHz to 500 MHz 116 116 128 128 115
    115
    500 MHz to 1 GHz 128 130 135 137 123
    123
    1 GHz to 2 GHz 131 131 138 138 128
    128
    2 GHz to 3.2 GHz 127 129 134 137 125
    125
    3.2 GHz to 10 GHz 131 129 138 137 126
    126
    10 GHz to 13.5 GHz 130 128 137 135 125
    125
    13.5 GHz to 16 GHz 127 128 136 137 125
    125
    16 GHz to 19 GHz 124 125 134 134 124
    124
    19 GHz to 24 GHz 124 126 134 134 123
    123
    24 GHz to 26.5 GHz 126 125 134 133 123
    123
    26.5 GHz to 30 GHz 116 115 125 125 111
    111
    30 GHz to 32 GHz 115 114 124 123 107
    107
    32 GHz to 35 GHz 116 113 124 123 108
    108
    35 GHz to 40 GHz 107 104 115 114 106
    106
    40 GHz to 43.5 GHz 111 108 120 117 107
    107
    43.5 GHz to 50 GHz 111 109 120 119 107
    107
    50 GHz to 60 GHz 108 106 117 116 104
    104
    60 GHz to 64 GHz 109 108 118 117 103
    103
    64 GHz to 67 GHz 108 109 118 118 101
    101
    2 System Dynamic Range measured in High Power Mode.
    3 Either port can be used as the source port. Any other port can be used as the receiver port.
    条件：1 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise Floor.
    1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 7.
    3 Specification applies to new instruments. Test limit during recertification is defined by Maximum Leveled Power - Noise
    Table 7. System Dynamic Range at Test Port (dB), Option
    425 (LFE Enabled)
    Description Specification1 Typical
    Ports 1, 3 Ports 2, 4 Ports 1, 3 Ports
    4
    500 Hz to 900 Hz -- -- 105
    105
    900 Hz to 1 kHz 100 102 109
    110
    1 kHz to 10 kHz 103 105 110
    111
    10 kHz to 100 kHz 113 115 120
    121
    100 kHz to 1 MHz 120 121 124
    125
    1 MHz to 5 MHz 121 122 126
    127
    5 MHz to 10 MHz 112 114 118
    119
    10 MHz to 50 MHz 110 112 116
    117
    50 MHz to 100 MHz 110 112 116
    117
    Table 8. System Dynamic Range at Test Port (dB), Option
    425 (LFE Enabled), Combine Mode - Typical
    Description Source 1 Port 1 Source 2 Port
    1
    500 Hz to 900 Hz 99
    98
    900 Hz to 1 kHz 103
    102
    1 kHz to 10 kHz 104
    103
    10 kHz to 100 kHz 104
    103
    100 kHz to 1 MHz 118
    118
    1 MHz to 5 MHz 119
    119
    5 MHz to 10 MHz 111
    110
    10 MHz to 50 MHz 111
    110
    50 MHz to 100 MHz 111
    110
    Table 9. System Dynamic Range at Test Port (dB), Option
    425 with 029 or E29 - Specification
    Description Specification3
    Port 2 1 Port
    2
    10MHz to 50MHz1 82
    81
    50MHz to 100MHz1 109
    108
    100MHz to 500MHz 117
    116
    500MHz to 1GHz 129
    130
    1GHz to 2GHz 131
    132
    2GHz to 3.2GHz 126
    130
    3.2GHz to 6GHz 133
    132
    6GHz to 10GHz 131
    130
    10GHz to 13.5GHz 131
    128
    13.5GHz to 16GHz 130
    128
    16GHz to 19GHz 129
    127
    19GHz to 24GHz 128
    128
    24GHz to 26.5GHz 127
    127
    26.5GHz to 30GHz 118
    116
    30GHz to 32GHz 116
    114
    32GHz to 35GHz 116
    114
    35GHz to 40GHz 108
    107
    40GHz to 43.5GHz 111
    111
    43.5 GHz to 50GHz 111
    111
    50GHz to 60GHz 108
    107
    60GHz to 64GHz 109
    108
    64GHz to 67GHz 109
    108
    2 System Dynamic Range measured in High Power Mode.
    Table 10. System Dynamic Range at Test Port (dB), Option
    425 with 029 or E29 - Typical
    Description Option
    425 with 029
    Port 2 1 Port 2 Source 1 Port
    1
    Combine Mode
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 7.
    Source 2 Port
    1
    Combine Mode 10MHz to 50MHz1 90 90 81 81 50MHz to 100MHz1 116 116 106 106 100MHz to 500MHz 128 128 115
    115
    500MHz to 1GHz 135 136 123
    123
    1GHz to 2GHz 138 138 128
    128
    2GHz to 3.2GHz 133 136 125
    125
    3.2GHz to 6GHz 139 139 125
    125
    6GHz to 10GHz 137 136 125
    125
    10GHz to 13.5GHz 137 135 124
    124
    13.5GHz to 16GHz 137 136 125
    125
    16GHz to 19GHz 135 135 124
    124
    19GHz to 24GHz 135 135 123
    123
    24GHz to 26.5GHz 134 133 122
    122
    26.5GHz to 30GHz 125 124 110
    110
    30GHz to 32GHz 123 122 106
    106
    32GHz to 35GHz 123 122 107
    107
    35GHz to 40GHz 115 115 105
    105
    40GHz to 43.5GHz 119 119 105
    105
    43.5GHz to 50GHz 118 119 105
    105
    50GHz to 60GHz 116 116 102
    102
    60GHz to 64GHz 117 117 100
    100
    64GHz to 67GHz 118 118 100
    100
    2 System Dynamic Range measured in High Power Mode.
    Extended 动态范围
    Table
    11. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
    Description Options 201, 401 Options 219
    419
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports1 2
    4
    10 MHz to 50 MHz 136 136 134
    133
    50 MHz to 100 MHz 146 147 146
    147
    100 MHz to 500 MHz 159 159 158
    159
    500 MHz to 1 GHz 164 167 165
    167
    1 GHz to 2 GHz 153 154 153
    154
    2 GHz to 3.2 GHz 149 153 149
    151
    3.2 GHz to 10 GHz 154 153 154
    153
    10 GHz to 13.5 GHz 153 151 151
    150
    13.5 GHz to 16 GHz 152 151 150
    150
    16 GHz to 19 GHz 152 152 148
    148
    19 GHz to 24 GHz 152 151 148
    148
    24 GHz to 26.5 GHz 151 151 148
    148
    26.5 GHz to 30 GHz 144 143 139
    138
    30 GHz to 32 GHz 142 142 138
    138
    32 GHz to 35 GHz 142 142 138
    137
    35 GHz to 40 GHz 134 134 130
    128
    40 GHz to 43.5 GHz 138 138 133
    134
    43.5 GHz to 50 GHz 138 138 132
    131
    50 GHz to 60 GHz 136 135 130
    129
    60 GHz to 64 GHz 136 135 129
    129
    64 GHz to 67 GHz 137 136 130
    130
    67 GHz to 70GHz 133 132 125
    126
    1Either port can be used as the source port. Any other port can be used as the receiver port.
    Table
    12. Extended Dynamic Range at Direct Receiver Access Input (dB) – Typical
    Description Option 224 Option 224, 423 Options 224
    423
    Source
    2
    Out
    1
    Source2
    Out 2 Ports1 1, 3 Ports12, 4 Source 1 Port
    1
    Combine Mode
    Source 2 Port
    1
    Combine Mode 10 MHz to 50 MHz 135 135 127 136 111 111 50 MHz to 100 MHz 144 146 138 147 117 117 100 MHz to 500 MHz 158 160 148 160 126
    126
    500 MHz to 1 GHz 165 168 157 165 136
    136
    1 GHz to 2 GHz 153 156 146 153 137
    137
    2 GHz to 3.2 GHz 147 154 148 148 139
    139
    3.2 GHz to 10 GHz 155 156 151 154 140
    140
    10 GHz to 13.5 GHz 154 154 149 152 139
    139
    13.5 GHz to 16 GHz 153 155 149 151 139
    139
    16 GHz to 19 GHz 153 153 148 149 137
    137
    19 GHz to 24 GHz 153 153 147 148 135
    135
    24 GHz to 26.5 GHz 151 153 147 148 135
    135
    26.5 GHz to 30 GHz 143 143 135 140 123
    123
    30 GHz to 32 GHz 141 142 133 138 120
    120
    32 GHz to 35 GHz 141 142 134 137 121
    121
    35 GHz to 40 GHz 133 133 131 130 118
    118
    40 GHz to 43.5 GHz 137 138 131 130 118
    118
    43.5 GHz to 50 GHz 137 138 131 132 118
    118
    50 GHz to 60 GHz 135 135 128 129 114
    114
    60 GHz to 64 GHz 135 136 127 129 112
    112
    64 GHz to 67 GHz 137 137 126 129 111
    111
    1Either port can be used as the source port. Any other port can be used as the receiver port.
    Table
    13. Extended Dynamic Range at Direct Receiver Input (dB) - Typical
    Description Options 224 or 423 with 029 or E291 Options
    224 or 423 with 029 or E291
    Port 1 Port 2 Source 1 Port
    1
    Combine Mode
    Source 2 Port
    1
    Combine Mode 10 MHz to 50 MHz 136 136 111 111 50 MHz to 100 MHz 147 148 117 117 100 MHz to 500 MHz 160 160 126
    126
    500 MHz to 1 GHz 165 167 136
    136
    1 GHz to 2 GHz 153 154 137
    137
    2 GHz to 3.2 GHz 149 152 139
    139
    3.2 GHz to 6 GHz 155 154 139
    139
    6 GHz to 10 GHz 153 152 139
    139
    10 GHz to 13.5 GHz 151 150 138
    138
    13.5 GHz to 16 GHz 151 150 139
    139
    16 GHz to 19 GHz 149 149 137
    137
    19 GHz to 24 GHz 148 148 134
    134
    24 GHz to 26.5 GHz 147 147 134
    134
    26.5 GHz to 30 GHz 139 139 122
    122
    30 GHz to 32 GHz 137 137 119
    119
    32 GHz to 35 GHz 137 137 120
    120
    35 GHz to 40 GHz 129 128 117
    117
    40 GHz to 43.5 GHz 132 132 116
    116
    43.5 GHz to 50 GHz 131 131 116
    116
    50 GHz to 60 GHz 128 128 112
    112
    60 GHz to 64 GHz 128 128 109
    109
    64 GHz to 67 GHz 128 128 109
    109
    1 Option 029 or E29 affects system dynamic range with port 1 or port 2 as the source port. Refer to Table
    12 for the
    extended dynamic range with port 3 or port 4 as the source port. Port
    1 impedance tuner switch is in bypass position
    and port
    2 noise receiver switch is in normal position.
    Table
    14. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
    Description Option
    425
    Ports1 1, 3 Ports1 2
    4
    10 MHz to 50 MHz 130
    129
    50 MHz to 100 MHz 144
    144
    100 MHz to 500 MHz 156
    156
    500 MHz to 1 GHz 163
    165
    1 GHz to 2 GHz 153
    153
    2 GHz to 3.2 GHz 149
    152
    3.2 GHz to 10 GHz 153
    152
    10 GHz to 13.5 GHz 151
    149
    13.5 GHz to 16 GHz 150
    151
    16 GHz to 19 GHz 148
    148
    19 GHz to 24 GHz 148
    148
    24 GHz to 26.5 GHz 148
    147
    26.5 GHz to 30 GHz 139
    139
    30 GHz to 32 GHz 138
    137
    32 GHz to 35 GHz 138
    137
    35 GHz to 40 GHz 129
    128
    40 GHz to 43.5 GHz 133
    130
    43.5 GHz to 50 GHz 133
    132
    50 GHz to 60 GHz 129
    128
    60 GHz to 64 GHz 129
    128
    64 GHz to 67 GHz 129
    129
    1 Either port can be used as the source port. Any other port can be used as the receiver port.
    Table
    15. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
    Description Option
    425 with 029 or E29
    Port 1 Port
    2
    10 MHz to 50 MHz 130
    130
    50 MHz to 100 MHz 144
    144
    100 MHz to 500 MHz 156
    156
    500 MHz to 1 GHz 163
    164
    1 GHz to 2 GHz 153
    153
    2 GHz to 3.2 GHz 148
    151
    3.2 GHz to 6 GHz 154
    154
    6 GHz to 10 GHz 152
    151
    10 GHz to 13.5 GHz 151
    149
    13.5 GHz to 16 GHz 151
    150
    16 GHz to 19 GHz 149
    149
    19 GHz to 24 GHz 149
    149
    24 GHz to 26.5 GHz 148
    147
    26.5 GHz to 30 GHz 139
    138
    30 GHz to 32 GHz 137
    136
    32 GHz to 35 GHz 137
    136
    35 GHz to 40 GHz 129
    129
    40 GHz to 43.5 GHz 132
    132
    43.5 GHz to 50 GHz 131
    132
    50 GHz to 60 GHz 128
    128
    60 GHz to 64 GHz 128
    128
    64 GHz to 67 GHz 129
    129
    接收机动态范围
    Table
    16. Receiver Dynamic Range (dB), All Options
    接收机动态范围
    10 MHz to 50 MHz
    91
    50 MHz to 100 MHz
    113
    100 MHz to 500 MHz
    122
    500 MHz to 1 GHz
    131
    1 GHz to 10 GHz
    134
    10 GHz to 16 GHz
    133
    16 GHz to 26.5 GHz
    134
    26.5 GHz to 30 GHz
    122
    30 GHz to 40 GHz
    121
    40 GHz to 50 GHz
    119
    50 GHz to 67 GHz
    118
    67 GHz to 70 GHz
    106
    Table 17. Receiver Dynamic Range (dB), All Ports, Option
    425 (LFE Enabled)
    接收机动态范围
    500 Hz to 900 Hz
    106
    900 Hz to 1 kHz
    109
    1 kHz to 10 kHz
    109
    10 kHz to 100 kHz
    118
    100 kHz to 1 MHz
    123
    1 MHz to 5 MHz
    123
    5 MHz to 10 MHz
    119
    10 MHz to 50 MHz
    120
    50 MHz to 100 MHz
    120
    校准后系统性能, 全部选件
    条件：Specification are valid for temperatures of 23°±3°C and < 1° C deviation from the calibration temperature.
    with Option 029, the port 1 noise tuner switch is set to the bypass position, and the port 2 noise receiver
    Specifications assume an N4697F flexible test port cable and a full
    2-port calibration. For instruments
    Note: For any Sii reflection measurement
    • Sjj =
    0.
    For any Sij transmission measurement
    • Sji = Sij when Sij ≤
    1
    • Sji = 1/Sij when Sij &gt;
    1
    • Skk =
    0 for all k
    specifications for other calibration kits and measurement setups.
    Table 18.
    85058B Calibration Kit
    For any Sij transmission measurement
    Description10 MHz to 45 MHz45 MHz to 2 GHz2 GHz to 10 GHz10 GHz to 20 GHz20 GHz to 35 GHz35 GHz to 50 GHz
    50 GHz to
    60 GHz
    60 GHz to
    67 GHz
    Directivity 35 35413837373434
    Source Match 34 34444041424040
    Load Match 34 34403635363333
    反射跟踪
    Mag ±0.020 ±0.020 ±0.011 ±0.033 ±0.033 ±0.020 ±0.031
    ±0.031
    Phase (°) ±0.13 ±0.13 ±0.067 ±0.22 ±0.22 ±0.14 ±0.20
    ±0.20
    传输跟踪
    Mag ±0.17 ±0.17 ±0.065 ±0.10 ±0.11 ±0.094 ±0.14
    ±0.15
    Phase (°) ±1.2 ±1.2 ±0.43 ±0.66 ±0.67 ±0.62 ±0.91
    ±0.99
    Reflection 不确定度
    Table 19. 85058B Calibration Kit, LFE Enabled (Option
    425)
    Reflection 不确定度
    Description1 kHz to 10 kHz10 kHz to 1 MHz1 MHz to 5 MHz5 MHz to 50 MHz50 MHz to 100 MHz
    Directivity3535353535
    Source Match3434343434
    Load Match3435353434
    反射跟踪
    Mag ±0.020 ±0.020 ±0.020 ±0.020
    ±0.020
    Phase (°) ±0.13 ±0.13 ±0.13 ±0.13
    ±0.13
    传输跟踪
    Mag ±0.15 ±0.047 ±0.11 ±0.15
    ±0.13
    Phase (°) ±1.0 ±0.31 ±0.69 ±0.94
    ±0.83
    Transmission Uncertainty, Option
    425
    Reflection Uncertainty, Option
    425
    Table
    20. N4694A Calibration Kit
    传输跟踪
    Description10 MHz to 45 MHz45 MHz to 2 GHz2 GHz to 10 GHz10 GHz to 20 GHz20 GHz to 35 GHz35 GHz to 50 GHz
    50 GHz to
    60 GHz
    60 GHz to
    67 GHz
    Directivity 33 41474744424138
    Source Match 25 38393934333027
    Load Match 31 38434340383734
    反射跟踪
    Mag ±0.051 ±0.041 ±0.041 ±0.041 ±0.061 ±0.070 ±0.081
    ±0.091
    Phase (°) ±0.34 ±0.27 ±0.27 ±0.27 ±0.40 ±0.47 ±0.54
    ±0.60
    传输跟踪
    Mag ±0.37 ±0.11 ±0.075 ±0.075 ±0.13 ±0.15 ±0.20
    ±0.28
    Phase (°) ±2.5 ±0.71 ±0.50 ±0.50 ±0.83 ±0.95 ±1.3
    ±1.9
    Reflection 不确定度
    Table 21. N4694A Calibration Kit, LFE Enabled (Option
    425)
    Reflection 不确定度
    Description1 kHz to 10 kHz10 kHz to 1 MHz1 MHz to 5 MHz5 MHz to 50 MHz50 MHz to 100 MHz
    Directivity3333333341
    Source Match2525252538
    Load Match2424242436
    反射跟踪
    Mag ±0.051 ±0.051 ±0.051 ±0.051
    ±0.041
    Phase (°) ±0.34 ±0.34 ±0.34 ±0.34
    ±0.27
    传输跟踪
    Mag ±0.14 ±0.072 ±0.11 ±0.13
    ±0.068
    Phase (°) ±0.91 ±0.48 ±0.70 ±0.85
    ±0.45
    Transmission Uncertainty, Option
    425
    Reflection Uncertainty, Option
    425
    Table
    22. N4694D Calibration Kit
    传输跟踪
    Description10 MHz to 45 MHz45 MHz to 2 GHz2 GHz to 10 GHz10 GHz to 20 GHz20 GHz to 35 GHz35 GHz to 50 GHz
    50 GHz to
    60 GHz
    60 GHz to
    67 GHz
    Directivity 41 41424240383533
    Source Match 38 38393934333026
    Load Match 35 36373732312824
    反射跟踪
    Mag ±0.081 ±0.041 ±0.041 ±0.041 ±0.061 ±0.081 ±0.081
    ±0.13
    Phase (°) ±0.54 ±0.27 ±0.27 ±0.27 ±0.40 ±0.54 ±0.54
    ±0.80
    传输跟踪
    Mag ±0.12 ±0.079 ±0.071 ±0.075 ±0.11 ±0.14 ±0.15
    ±0.22
    Phase (°) ±0.79 ±0.53 ±0.47 ±0.50 ±0.69 ±0.90 ±0.99
    ±1.5
    Reflection 不确定度
    Table 23. N4694D Calibration Kit, LFE Enabled (Option
    425)
    Reflection 不确定度
    Description1 kHz to 10 kHz10 kHz to 1 MHz1 MHz to 5 MHz5 MHz to 50 MHz50 MHz to 100 MHz
    Directivity4141414141
    Source Match3838383838
    Load Match3537363536
    反射跟踪
    Mag ±0.081 ±0.081 ±0.081 ±0.081
    ±0.041
    Phase (°) ±0.54 ±0.54 ±0.54 ±0.54
    ±0.27
    传输跟踪
    Mag ±0.12 ±0.089 ±0.11 ±0.12
    ±0.068
    Phase (°) ±0.76 ±0.59 ±0.68 ±0.74
    ±0.45
    Transmission Uncertainty, Option
    425
    Reflection Uncertainty, Option
    425
    switch is in normal position unless specified
    Table
    24. Uncorrected System Performance (dB), All Options, All Ports - Specification
    switch is in normal position unless specified
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 28 and Table 29 .
    2 Port 1 and 2 load matches with Option 029 are degraded by 1 dB.
    Description10 MHz to 50 MHz50 MHz to 500 MHz500 MHz to 2 GHz
    2 GHz to 3.2 GHz20 (20)10 (8)7 (7)
    3.2 GHz to 10 GHz20 (20)7 (7)72 (72)
    10 GHz to 16 GHz16 (16)7 (7)6 (6)
    16 GHz to 20 GHz16 (16)7 (7)72 (72)
    20 GHz to 26.5 GHz14 (14)7 (7)72 (72)
    26.5 GHz to 50 GHz13 (11)7 (7)6 (6)
    50 GHz to 60 GHz13 (13)7 (6)72 (72)
    60 GHz to 67 GHz10 (10)6 (5)6 (6)
    ( ) With Option425 installed.
    Table25. Uncorrected System Performance (dB), All Options, All Ports - Typical
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 28 and Table 29 .
    Tracking Crosstalk 10 MHz to 50 MHz1 20 9 (9) 8 (8) ±1.5 ±1.5 -84 (-81) 50 MHz to 100 MHz1 28 19 (10) 17 (11) ±1.5 ±1.5 -107 (-103) 100 MHz to 500 MHz 28 19 (8) 17 (8) ±1.5 ±1.5
    -118 (-115)
    500 MHz to 2 GHz 31 14 (9) 12 (8) ±1.5 ±1.5
    -126 (-122)
    2 GHz to 3.2 GHz 28 14 (13) 12 (8) ±1.5 ±1.5
    -126 (-124)
    3.2 GHz to 10 GHz 25 11 (11) 10 (10) ±1.5 ±1.5
    -128 (-126)
    10 GHz to 13.5 GHz 23 10 (10) 10 (10) ±1.5 ±1.5
    -125 (-123)
    13.5 GHz to 16 GHz 23 11 (11) 11 (11) ±1.5 ±1.5
    -128 (-125)
    16 GHz to 20 GHz 20 11 (11) 11 (11) ±1.5 ±1.5
    -127 (-124)
    20 GHz to 26.5 GHz 18 11 (11) 11 (11) ±1.5 ±1.5
    -126 (-124)
    26.5 GHz to 35 GHz 16 11 (11) 11 (11) ±1.5 ±1.5
    -117 (-115)
    35 GHz to 43.5 GHz 16 11 (11) 11 (11) ±1.5 ±1.5
    -111 (-109)
    43.5 GHz to 46 GHz 19 11 (11) 11 (11) ±1.5 ±1.5
    -114 (-113)
    46 GHz to 50 GHz 19 11 (11) 12 (12) ±1.5 ±1.5
    -116 (-114)
    50 GHz to 60 GHz 16 11 (10) 12 (12) ±1.5 ±1.5
    -111 (-109)
    60 GHz to 67 GHz 16 9 (8) 10 (10) ±1.5 ±1.5
    -110 (-108)
    67 GHz to 70 GHz 15 10 (10) 10 (10) +5/-10 ±1.5
    -107 (-105)
    ( ) With Option
    425 installed.
    Table 26. Noise Mode1 Uncorrected System Performance (dB), Option
    029 or E29 - Specification
    说明方向性源匹配负载匹配
    条件：position. 2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 28 and Table 29 . ( ) With Option 425 installed.
    Port 1 Port 2 Port 1 Port 2 Port 1 Port
    2
    10 MHz to 50 MHz2 17 (17) 17 (17) 3 (7) 3 (9) 3 (9)
    3 (9)
    50 MHz to 500 MHz2 24 (24) 24 (24) 8 (5) 12 (7) 8 (5)
    12 (7)
    500 MHz to 2 GHz 24 (24) 24 (24) 7 (5) 14 (7) 7 (6)
    15 (7)
    2 GHz to 3.2 GHz 20 (20) 20 (20) 7 (7) 14 (8) 7 (7)
    14 (10)
    3.2 GHz to 10 GHz 20 (20) 20 (20) 7 (7) 7 (7) 7 (7)
    7 (7)
    10 GHz to 20 GHz 16 (16) 16 (16) 6 (6) 6 (6) 6 (6)
    6 (6)
    20 GHz to 26.5 GHz 14 (14) 14 (14) 6 (6) 6 (6) 6 (6)
    6 (6)
    26.5 GHz to 50 GHz 13 (11) 13 (11) 6 (6) 6 (6) 6 (6)
    6 (6)
    50 GHz to 60 GHz 11 (10) 11 (10) 5 (5) 5 (5) 5 (5)
    5 (5)
    60 GHz to 67 GHz 10 (7) 9 (8) 4 (4) 4 (4) 4 (4)
    2 (2)
    1 Noise mode sets port 1 impedance tuner switch to tuner position and port
    2 noise receiver switch to noise receiver
    Table 27. Noise Mode1 Uncorrected System Performance (dB), Option
    029 or E29 - Typical
    Description Source Match Load Match Reflection Tracking Transmission
    条件：position. 2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 28 and Table 29 . ( ) With Option 425 installed.
    Port 1 Port 2 Port 1 Port 2 Port 1 Port 2 Ports
    2
    10 MHz to 50 MHz2 4 (9) 4 (10) 3 (8) 4 (10) -2.5/-5 ± 2.5
    ± 1.5
    50 MHz to 500 MHz2 11 (10) 19 (8) 8 (8) 17 (12) -2.5/-6.5 ± 1.5
    ± 1.5
    500 MHz to 2 GHz 12 (8) 14 (8) 7 (7) 20 (12) -2.5/-6.5 ± 1.5
    ± 1.5
    2 GHz to 3.2 GHz 11 (9) 11 (9) 7 (7) 20 (12) -2.5/-6.5 ± 1.5
    ± 1.5
    3.2 GHz to 10 GHz 10 (13) 10 (10) 6 (6) 10 (10) -2.5/-6.5 ± 1.5
    ± 1.5
    10 GHz to 13.5 GHz 11 (11) 11 (11) 6 (6) 11 (11) -2.5/-6.5 ± 1.5
    ± 1.5
    13.5 GHz to 16 GHz 11 (11) 11 (11) 6 (6) 11 (11) -2.5/-6.5 ± 1.5
    ± 1.5
    16 GHz to 20 GHz 10 (10) 11 (11) 6 (6) 11 (11) -4/-11 ± 1.5
    ± 1.5
    20 GHz to 24 GHz 11 (11) 11 (11) 6 (6) 11 (11) -4/-11 ± 1.5
    ± 1.5
    24 GHz to 26.5 GHz 11 (11) 11 (11) 6 (6) 11 (11) -4/-11 ± 1.5
    ± 1.5
    26.5 GHz to 43.5 GHz 11 (11) 11 (11) 6 (6) 11 (11) -4/-9 ± 2.5
    ± 1.5
    43.5 GHz to 46 GHz 11 (11) 10 (10) 6 (6) 10 (10) -5/-9.5 ± 3
    ± 1.5
    46 GHz to 50 GHz 11 (11) 11 (11) 6 (6) 11 (11) -5/-9.5 ± 3
    ± 1.5
    50 GHz to 60 GHz 10 (10) 11 (11) 9 (9) 11 (11) -7/-11 ± 3
    ± 1.5
    60 GHz to 67 GHz 9 (9) 8 (8) 9 (9) 8 (8) -8/-9 ± 5
    ± 1.5
    1 Noise mode sets port 1 impedance tuner switch to tuner po sition and port
    2 noise receiver switch to noise receiver
    Table 28. Uncorrected System Performance (dB), All Ports, Option
    425 (LFE Enabled) - Specifications
    Crosstalk 1 kHz to 10 kHz 1 7 7 -- -- -- 10 kHz to 1 MHz 16 15 19 -- -- -- 1 MHz to 5 MHz 16 9
    11 -- -- --
    5 MHz to 50 MHz 5 7
    8 -- -- --
    50 MHz to 100 MHz 5 8
    9 -- -- --
    Table 29. Uncorrected System Performance (dB), All Ports, Option
    425 (LFE Enabled)- Typical
    Crosstalk 500 Hz to 900 Hz -- -- -- -- -- -102 900 Hz to 1 kHz 4 8 9 ±1.5 ±1.5 -106 1 kHz to 10 kHz 5 9 8 ±1.5 ±1.5
    -100
    10 kHz to 100 kHz 23 19 23 ±1.5 ±1.5
    -106
    100 kHz to 1 MHz 23 19 23 ±1.5 ±1.5
    -126
    1 MHz to 5 MHz 26 13 14 ±1.5 ±1.5
    -121
    5 MHz to 10 MHz 11 9 10 ±1.5 ±1.5
    -121
    10 MHz to 50 MHz 11 9 10 ±1.5 ±1.5
    -117
    50 MHz to 100 MHz 11 11 11 ±1.5 ±1.5
    -117
    normal position unless specified
    Table
    30. Frequency Information, All Options
    normal position unless specified
    DescriptionSpecificationTypical
    Frequency Range 10 MHz to 67 GHz67 GHz to70 GHz
    Frequency Range (Option 425) 900 Hz to 67 GHz500 Hz to900 Hz
    Frequency Resolution1 Hz --
    Frequency Accuracy± 0.7 ppm --
    Initial Frequency Accuracy1± 0.2 ppm± 0.1 ppm
    Frequency Stability -- ±0.05 ppm-10° to70° C2
    ±0.5 ppm (first year)3
    1 Verified after Factory Frequency Reference adjustment, or after adjustment at a Keysight Service Center .
    2 Assumes no variation in time.
    3 Assumes no variation in temperature. Stability generally improves over time.
    Table 31. Maximum Leveled Power (dBm), Options201 or401
    normal position unless specified
    DescriptionSpecificationTypical
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports124
    Filtered Mode2 Hi Power Mode2 Filtered Mode2 Hi Power Mode2
    10 MHz to 50 MHz 4 10 10 121917
    50 MHz to 500 MHz 8 13 13 132020
    500 MHz to 1 GHz 8 13 13 141920
    1 GHz to 2 GHz 8 13 13 121820
    2 GHz to 3.2 GHz 10 10 13 151617
    3.2 GHz to 10 GHz 13 13 13 181818
    10 GHz to 13.5 GHz 11 11 11 161615
    13.5 GHz to 16 GHz 12 12 12 161616
    16 GHz to 19 GHz 10 10 10 151515
    19 GHz to 26.5 GHz 11 11 11 151515
    26.5 GHz to 30 GHz 10 10 10 141414
    30 GHz to 32 GHz 7 7 7 121212
    32 GHz to 35 GHz 9 9 9 131313
    35 GHz to 40 GHz 5 5 5 999
    40 GHz to 67 GHz 10 10 10 131313
    67 GHz to 70 GHz -- -- -- 121212
    1 Either port can be used as the source port.
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi P ower Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 32. Maximum Leveled Power (dBm), Options
    219 or 419
    信号 bypasses 滤波器至 maximize 输出功率
    DescriptionSpecificationTypical
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports124
    Filtered Mode2 Hi Power Mode2 Filtered Mode2 Hi Power Mode2
    10 MHz to 50 MHz 4 9 9 121917
    50 MHz to 500 MHz 8 13 13 132020
    500 MHz to 1 GHz 8 13 13 141920
    1 GHz to 2 GHz 8 13 13 121820
    2 GHz to 3.2 GHz 9 9 13 151517
    3.2 GHz to 10 GHz 11 11 12 181818
    10 GHz to 13.5 GHz 9 9 9 151515
    13.5 GHz to 16 GHz 10 10 10 151515
    16 GHz to 19 GHz 8 8 8 131313
    19 GHz to 24 GHz 8 8 8 121212
    24 GHz to 30 GHz 7 7 7 121212
    30 GHz to 32 GHz 5 5 5 101010
    32 GHz to 35 GHz 6 6 6 111111
    35 GHz to 40 GHz 1 1 1 888
    40 GHz to 50 GHz 6 6 6 101010
    50 GHz to 60 GHz 5 5 5 101010
    60 GHz to 64 GHz 4 4 4 101010
    64 GHz to 67 GHz 4 4 4 999
    67 GHz to 70 GHz -- -- -- 666
    1 Either port can be used as the source port.
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi P ower Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 33. Maximum Leveled Power (dBm), Options
    224 or 423
    信号 bypasses 滤波器至 maximize 输出功率
    DescriptionSpecificationTypical
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports124
    Filtered Mode2 Hi Power Mode2 Filtered Mode2 Hi Power Mode2
    10 MHz to 50 MHz 4 8 8 111817
    50 MHz to 500 MHz 7 13 13 121919
    500 MHz to 1 GHz 7 13 13 131819
    1 GHz to 2 GHz 7 13 13 121719
    2 GHz to 3.2 GHz 9 9 13 141416
    3.2 GHz to 10 GHz 11 11 12 171717
    10 GHz to 13.5 GHz 8 8 8 141414
    13.5 GHz to 16 GHz 9 9 9 141414
    16 GHz to 19 GHz 7 7 7 121212
    19 GHz to 24 GHz 7 7 7 111111
    24 GHz to 30 GHz 6 6 6 111111
    30 GHz to 32 GHz 4 4 4 999
    32 GHz to 35 GHz 5 5 5 101010
    35 GHz to 40 GHz 0 0 0 777
    40 GHz to 50 GHz 5 5 5 101010
    50 GHz to 60 GHz 4 4 4 999
    60 GHz to 64 GHz 2 2 2 999
    64 GHz to 67 GHz 2 2 2 888
    1 Either port can be used as the source port.
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi P ower Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 34. Maximum Leveled Power (dBm), Options
    224 or 423, Combine Mode - Typical
    Description Source 1 Port 1 Source 2 Port
    1
    Filtered Mode1 Hi Power Mode1 Filtered Mode1 Hi Power Mode1
    10 MHz to 50 MHz 5 12 5
    12
    50 MHz to 500 MHz 6 13 6
    13
    500 MHz to 1 GHz 7 12 7
    12
    1 GHz to 2 GHz 6 11 6
    11
    2 GHz to 3.2 GHz 8 8 8
    8
    3.2 GHz to 10 GHz 9 9 9
    9
    10 GHz to 13.5 GHz 6 6 6
    6
    13.5 GHz to 16 GHz 6 6 6
    6
    16 GHz to 19 GHz 4 4 4
    4
    19 GHz to 24 GHz 2 2 2
    2
    24 GHz to 30 GHz 2 2 2
    2
    30 GHz to 32 GHz -1 -1 -1
    -1
    32 GHz to 35 GHz 0 0 0
    0
    35 GHz to 40 GHz -3 -3 -3
    -3
    40 GHz to 50 GHz 0 0 0
    0
    50 GHz to 60 GHz -2 -2 -2
    -2
    60 GHz to 64 GHz -3 -3 -3
    -3
    64 GHz to 67 GHz -4 -5 -4
    -5
    1 In Filtered Mode, the signal path goes through filters to minimize harmonics below
    3.2 GHz. In Hi P ower Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 35. Maximum Leveled Power (dBm), Option
    224
    信号 bypasses 滤波器至 maximize 输出功率
    DescriptionSpecificationTypical
    Source 2 Out1 Source2
    Out 2 Source 2 Out1 Source2
    Out2
    Mode1
    Hi Power
    Mode1 Filtered
    Mode1
    Hi Power
    Mode1
    10 MHz to 50 MHz 4 11 11 10 18
    17
    50 MHz to 500 MHz 8 17 15 12 21
    21
    500 MHz to 1 GHz 8 16 15 14 20
    21
    1 GHz to 2 GHz 8 15 15 14 19
    21
    2 GHz to 3.2 GHz 10 10 15 14 14
    18
    3.2 GHz to 10 GHz 14 14 16 19 19
    20
    10 GHz to 13.5 GHz 12 12 12 17 17
    19
    13.5 GHz to 16 GHz 13 13 13 17 17
    18
    16 GHz to 24 GHz 11 11 12 17 17
    17
    24 GHz to 30 GHz 11 11 12 16 16
    16
    30 GHz to 32 GHz 9 9 10 14 14
    14
    32 GHz to 35 GHz 11 11 11 15 15
    15
    35 GHz to 40 GHz 6 6 6 13 13
    13
    40 GHz to 50 GHz 11 11 11 16 16
    17
    50 GHz to 60 GHz 12 12 14 17 17
    18
    60 GHz to 67 GHz 12 12 14 17 17
    19
    1 In Filtered Mode, the signal path goes through filters to minimize harmonics below
    3.2 GHz. In Hi P ower Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 36. Maximum Leveled Power (dBm), Options
    224 or 423 with 029 or E291
    信号 bypasses 滤波器至 maximize 输出功率
    DescriptionSpecificationTypical
    Port 1 Port 2 Port1 Port2
    Filtered Mode2 Hi Power Mode2 Filtered Mode2 Hi Power Mode2
    10 MHz to 50 MHz 4 8 8 111817
    50 MHz to 500 MHz 7 13 13 121919
    500 MHz to 1 GHz 7 13 13 131819
    1 GHz to 2 GHz 7 13 13 121719
    2 GHz to 3.2 GHz 9 9 13 141416
    3.2 GHz to 10 GHz 9 9 10 161616
    10 GHz to 13.5 GHz 6 6 6 131313
    13.5 GHz to 16 GHz 6 6 6 141414
    16 GHz to 19 GHz 4 4 4 121212
    19 GHz to 24 GHz 4 4 4 111111
    24 GHz to 30 GHz 4 4 4 101010
    30 GHz to 32 GHz 2 2 2 888
    32 GHz to 35 GHz 3 3 3 999
    35 GHz to 40 GHz -2 -2 -2 666
    40 GHz to 50 GHz 4 4 4 888
    50 GHz to 60 GHz 3 3 3 777
    60 GHz to 64 GHz 1 1 1 666
    64 GHz to 67 GHz 1 1 1 666
    1 Option 029 or E29 affects port 1 and port2 maximum leveled power. Refer to Table33 for other ports .
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi P ower Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 37. Maximum Leveled Power (dBm), Options
    224 or 423 with 029 or E291, Combine Mode-Typical
    Description Source 1 Port 1 Source 2 Port
    1
    Filtered Mode2 Hi Power Mode2 Filtered Mode2 Hi Power Mode2
    10 MHz to 50 MHz 5 12 5
    12
    50 MHz to 500 MHz 6 13 6
    13
    500 MHz to 1 GHz 7 12 7
    12
    1 GHz to 2 GHz 6 11 6
    11
    2 GHz to 3.2 GHz 8 8 8
    8
    3.2 GHz to 10 GHz 8 8 8
    8
    10 GHz to 13.5 GHz 5 5 5
    5
    13.5 GHz to 16 GHz 6 6 6
    6
    16 GHz to 19 GHz 4 4 4
    4
    19 GHz to 24 GHz 2 2 2
    2
    24 GHz to 30 GHz 1 1 1
    1
    30 GHz to 32 GHz -2 -2 -2
    -2
    32 GHz to 35 GHz -1 -1 -1
    -1
    35 GHz to 40 GHz -4 -4 -4
    -4
    40 GHz to 50 GHz -2 -2 -2
    -2
    50 GHz to 60 GHz -4 -4 -4
    -4
    60 GHz to 64 GHz -6 -6 -6
    -6
    64 GHz to 67 GHz -6 -7 -6
    -7
    1 Option 029 or E29 affects port 1 and port 2 maximum leveled power. Refer to Table
    33 for other ports .
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below
    3.2 GHz. In Hi Power Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 38. Maximum Leveled Power (dBm), Noise Mode1, Options
    224 or 423 with 029 or E291 - Typical
    Description Port 1 Port 1 Port
    2
    Normal Mode Source 1 Port
    1
    Combine Mode
    Source 2 Port
    1
    Mode2
    Hi Power
    Mode2
    Mode2
    Hi Power
    Mode2
    Mode2
    Hi Power
    Mode2
    10 MHz to 50 MHz 6 13 0 7 0 7
    5
    50 MHz to 500 MHz 9 16 3 10 3 10
    10
    500 MHz to 2 GHz 9 14 3 8 3 8
    10
    2 GHz to 3.2 GHz 10 10 4 4 4 4
    7
    3.2 GHz to 10 GHz 12 12 4 4 4 4
    6
    10 GHz to 13.5 GHz 8 8 0 0 0 0
    3
    13.5 GHz to 16 GHz 9 9 1 1 1 1
    4
    16 GHz to 19 GHz 5 5 -3 -3 -3 -3
    2
    19 GHz to 30 GHz 4 4 -5 -5 -5 -5
    0
    30 GHz to 32 GHz 2 2 -8 -8 -8 -8
    -2
    32 GHz to 35 GHz 3 3 -7 -7 -7 -7
    -1
    35 GHz to 40 GHz 0 0 -10 -10 -10 -10
    -4
    40 GHz to 50 GHz 1 1 -9 -9 -9 -9
    -2
    50 GHz to 60 GHz -1 -1 -12 -12 -12 -12
    -3
    60 GHz to 64 GHz -2 -2 -14 -14 -14 -14
    -8
    64 GHz to 67 GHz -2 -2 -14 -15 -15 -15
    -8
    1 Noise mode sets port 1 tuner switch to tuner position and port
    2 noise receiver switch to noise receiver position.
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below
    3.2 GHz. In Hi Power Mode, the
    信号 bypasses 滤波器至 maximize 输出功率
    Table 39. Maximum Leveled Power (dBm), Option
    425
    信号 bypasses 滤波器至 maximize 输出功率
    条件：signal bypasses the filters to maximize output power. 2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz , see Table 46 .
    signal bypasses the filters to maximize output power. 2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled perf ormance ≤ 100 MHz, see Table 46 .
    DescriptionSpecificationTypical
    Ports 1, 3 Ports 2, 4 Ports 1, 3 Ports24
    Filtered Mode1 Hi Power Mode1 Filtered Mode1 Hi Power Mode1
    10 MHz to 50 MHz2 -3 1 1 41110
    50 MHz to 500 MHz2 2 8 8 71314
    500 MHz to 2 GHz 2 8 8 71214
    2 GHz to 3.2 GHz 7 7 11 121214
    3.2 GHz to 10 GHz 9 9 10 151515
    10 GHz to 13.5 GHz 6 6 6 121212
    13.5 GHz to 16 GHz 7 7 7 121212
    16 GHz to 19 GHz 5 5 5 101010
    19 GHz to 24 GHz 6 6 6 101010
    24 GHz to 26.5 GHz 5 5 5 101010
    26.5 GHz to 30 GHz 5 5 5 101010
    30 GHz to 32 GHz 2 2 2 777
    32 GHz to 35 GHz 3 3 3 888
    35 GHz to 40 GHz -1 -1 -1 666
    40 GHz to 50 GHz 4 4 4 999
    50 GHz to 60 GHz 3 3 3 888
    60 GHz to 67 GHz 1 1 1 777
    1 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi P ower Mode, the
    Table40. Maximum Leveled Power (dBm), Option425, Combine Mode - Typical
    Description Source 1 Port 1 Source2 Port1
    Filtered Mode1 Hi Power Mode1 Filtered Mode1 Hi Power Mode1
    10 MHz to 50 MHz2 -2 5-25
    50 MHz to 500 MHz2 1 818
    500 MHz to 1 GHz 2 727
    1 GHz to 2 GHz 4 949
    2 GHz to 3.2 GHz 6 666
    3.2 GHz to 10 GHz 7 777
    10 GHz to 13.5 GHz 4 444
    13.5 GHz to 16 GHz 4 444
    16 GHz to 19 GHz 2 222
    19 GHz to 24 GHz 1 111
    24 GHz to 30 GHz 1 111
    30 GHz to 32 GHz -3 -3-3-3
    32 GHz to 35 GHz -2 -2-2-2
    35 GHz to 40 GHz -4 -4-4-4
    40 GHz to 50 GHz -1 -1-1-1
    50 GHz to 60 GHz -3 -3-3-3
    60 GHz to 64 GHz -4 -4-4-4
    64 GHz to 67 GHz -5 -6-5-6
    1 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi P ower Mode, the
    Table 41. Maximum Leveled Power (dBm), Port 1 and 2, Option425 with029 or E291
    信号 bypasses 滤波器至 maximize 输出功率
    条件：signal bypasses the filters to maximize output power. 3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 46 .
    DescriptionSpecificationTypical
    Port 1 Port 2 Port1 Port2
    Filtered Mode2 Hi Power Mode2 Filtered Mode2 Hi Power Mode2
    10 MHz to 50 MHz3 -3 1 1 41110
    50 MHz to 500 MHz3 2 8 8 71314
    500 MHz to 2 GHz 2 8 8 71214
    2 GHz to 3.2 GHz 7 7 11 121214
    3.2 GHz to 10 GHz 7 7 8 141414
    10 GHz to 13.5 GHz 4 4 4 111111
    13.5 GHz to 16 GHz 4 4 4 121212
    16 GHz to 19 GHz 2 2 2 101010
    19 GHz to 24 GHz 3 3 3 101010
    24 GHz to 26.5 GHz 3 3 3 999
    26.5 GHz to 30 GHz 3 3 3 999
    30 GHz to 32 GHz 0 0 0 666
    32 GHz to 35 GHz 1 1 1 777
    35 GHz to 40 GHz -3 -3 -3 555
    40 GHz to 50 GHz 3 3 3 777
    50 GHz to 60 GHz 2 2 2 666
    60 GHz to 67 GHz 0 0 0 555
    1 Option 029 or E29 only affects port 1 and port 2 maximum leveled power. Refer to Table 33 for ports3 and4 .
    2 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi Power Mode, the
    Table 42. Maximum Leveled Power (dBm), Port 3 and 4, Option425 with029 or E291
    信号 bypasses 滤波器至 maximize 输出功率
    条件：signal bypasses the filters to maximize output power. 2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 46 .
    signal bypasses the filters to maximize output power. 2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled perf ormance ≤ 100 MHz, see Table 44 .
    DescriptionSpecificationTypical
    Port 3 Port 4 Port3 Port4
    Filtered Mode1 Hi Power Mode1 Filtered Mode1 Hi Power Mode1
    10 MHz to 50 MHz2 -3 1 1 41110
    50 MHz to 500 MHz2 2 8 8 71314
    500 MHz to 2 GHz 2 8 8 71214
    2 GHz to 3.2 GHz 7 7 10 121213
    3.2 GHz to 10 GHz 9 9 10 151515
    10 GHz to 13.5 GHz 6 6 6 121212
    13.5 GHz to 16 GHz 7 7 7 121212
    16 GHz to 19 GHz 5 5 5 101010
    19 GHz to 24 GHz 6 6 6 101010
    24 GHz to 26.5 GHz 5 5 5 101010
    26.5 GHz to 30 GHz 5 5 5 101010
    30 GHz to 32 GHz 2 2 2 777
    32 GHz to 35 GHz 3 3 3 888
    35 GHz to 40 GHz -1 -1 -1 666
    40 GHz to 50 GHz 4 4 4 999
    50 GHz to 60 GHz 3 3 3 888
    60 GHz to 67 GHz 1 1 1 777
    1 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi Power Mode, the
    Table 43. Maximum Leveled Power (dBm), Option425 with029 or E29, Combine Mode - Typical
    Description Source 1 Port 1 Source2 Port1
    Filtered Mode1 Hi Power Mode1 Filtered Mode1 Hi Power Mode1
    10 MHz to 50 MHz2 -2 5-25
    50 MHz to 500 MHz2 1 818
    500 MHz to 1 GHz 2 727
    1 GHz to 2 GHz 4 949
    2 GHz to 3.2 GHz 6 666
    3.2 GHz to 10 GHz 6 666
    10 GHz to 13.5 GHz 3 333
    13.5 GHz to 16 GHz 4 444
    16 GHz to 19 GHz 2 222
    19 GHz to 24 GHz 1 111
    24 GHz to 30 GHz 0 000
    30 GHz to 32 GHz -4 -4-4-4
    32 GHz to 35 GHz -3 -3-3-3
    35 GHz to 40 GHz -5 -5-5-5
    40 GHz to 50 GHz -3 -3-3-3
    50 GHz to 60 GHz -5 -5-5-5
    60 GHz to 64 GHz -7 -7-7-7
    64 GHz to 67 GHz -7 -8-7-8
    1 In Filtered Mode, the signal path goes through filters to minimize harmonics below3.2 GHz. In Hi Power Mode, the
    Table 44. Maximum Power (dBm), All Ports, Option425 with029 or E29 (LFE Enabled), Combine Mode - Typical
    Description Source 1 Port 1 Source2 Port1
    500 Hz to 900 Hz66
    900 Hz to 1 kHz76
    1 kHz to 10 kHz77
    10 kHz to 100 kHz87
    100 kHz to 1 MHz87
    1 MHz to 5 MHz76
    5 MHz to 10 MHz54
    10 MHz to 50 MHz54
    50 MHz to 100 MHz54
    Table 45. Maximum Leveled Power (dBm), Noise Mode1, Options425 with029 or E29 - Typical
    Description Port 1 Source 2 Port1 Port2
    Mode2
    Hi Power
    Mode2
    Mode2
    Hi Power
    Mode2
    Mode2
    Hi Power
    条件：position. 2 In Filtered Mode, the signal path goes through filters to minimize harmonics below 3.2 GHz. In Hi Power Mode, the signal bypasses the filters to maximize output power. 3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    Mode2
    10 MHz to 50 MHz3 -1 6 -7 0 -7 0
    -2
    50 MHz to 500 MHz3 4 11 -2 5 -2 5
    5
    500 MHz to 2 GHz 4 9 -2 3 -2 3
    5
    2 GHz to 3.2 GHz 8 8 2 2 2 2
    5
    3.2 GHz to 10 GHz 10 10 2 2 2 2
    4
    10 GHz to 13.5 GHz 6 6 -2 -2 -2 -2
    1
    13.5 GHz to 16 GHz 7 7 -1 -1 -1 -1
    2
    16 GHz to 19 GHz 3 3 -5 -5 -5 -5
    0
    19 GHz to 30 GHz 3 3 -6 -6 -6 -6
    -1
    30 GHz to 32 GHz 0 0 -10 -10 -10 -10
    -4
    32 GHz to 35 GHz 1 1 -9 -9 -9 -9
    -3
    35 GHz to 40 GHz -1 -1 -11 -11 -11 -11
    -5
    40 GHz to 50 GHz 0 0 -10 -10 -10 -10
    -3
    50 GHz to 60 GHz -2 -2 -13 -13 -13 -13
    -4
    60 GHz to 64 GHz -3 -3 -15 -15 -15 -15
    -9
    64 GHz to 67 GHz -3 -3 -15 -16 -16 -16
    -9
    1 Noise mode sets port 1 impedance tuner switch to tuner position and port
    2 noise receiver switch to noise receiver
    same for both LFE enabled or disabled
    Table 46. Maximum Power (dBm), All Ports – Option 425 and Option
    425 with 029 or E29 (LFE Enabled)
    Description Specification Typical1
    500 Hz to 900 Hz --
    12
    900 Hz to 1 kHz 10
    13
    1 kHz to 10 kHz 12
    13
    10 kHz to 100 kHz 12
    14
    100 kHz to 1 MHz 12
    14
    1 MHz to 5 MHz 10
    13
    5 MHz to 10 MHz
    11
    10 MHz to 50 MHz
    10
    50 MHz to 100 MHz
    10
    1 Values apply to all ports. Ports 2 and 4 typically
    1 dB higher .
    Table
    47. Typical Output Power Range of SRC3 on Rear Panel (dBm) - Option XSB1
    same for both LFE enabled or disabled
    条件：Table 48. Power Level Accuracy (dB) at Nominal Power1, All Options
    Description10 MHz to 6 GHz6 GHz to 7.6 GHz7.6 GHz to 9.6 GHz
    9.6 GHz to 12 GHz-65 to 6.5
    12 GHz to 13.5 GHz-65 to 7.5
    1 Option XSB requires Option 422 or Option423.
    same for both LFE enabled or disabled
    条件：1 Level accuracy at power other than nominal power, Power Level Accuracy (dB) at Nominal Power + Power Level
    Linearity (dB) 2 Any port can be used as the source port. Source in filtered mode where applicable. 3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the same for both LFE enabled or disabled. For LFE enabled perf ormance ≤ 100 MHz, see Table 49 .
    Port Power 10 MHz to 50 MHz3 ± 2.5 ± 2.0 ± 1.5 50 MHz to 67 GHz3 ± 1.5 ± 1.5 ± 1.5 1 Referenced to nominal power.
    3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 53 .
    3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 53 .
    1 Referenced to nominal power .
    3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 53 .
    DescriptionSpecificationTypical
    Ports2 1, 2, 3, 4 Source2 Out1
    Source 2 Out 2 Ports2 1, 2, 3, 4 Source2 Out1
    Source2 Out2
    10 MHz to 50 MHz3 ± 1.6 ± 2.6± 0.40± 0.86
    50 MHz to 1 GHz3 ± 1.0 ± 2.0± 0.29± 0.40
    1 GHz to 3.2 GHz ± 1.2 ± 2.0± 0.32± 0.28
    3.2 GHz to 10 GHz ± 1.5 ± 2.0± 0.39± 0.80
    10 GHz to 13.5 GHz ± 2.25 ± 2.0± 0.93± 0.77
    13.5 GHz to 20 GHz ± 2.25 ± 2.5± 0.51± 0.68
    20 GHz to 26.5 GHz ± 2.25 ± 2.5± 0.60± 1.01
    26.5 GHz to 40 GHz ± 3.0 ± 3.5± 0.83± 1.26
    40 GHz to 50 GHz ± 3.0 ± 3.5± 0.65± 1.04
    50 GHz to 60 GHz ± 4.0 ± 4.0± 1.03± 1.57
    60 GHz to 67 GHz ± 4.5 ± 4.5± 1.17± 3.14
    67 GHz to 70 GHz± 4.62± 7.22
    Table 49. Power Level Accuracy (dB), All Ports, Option 425 and Option425 with029 or E29 (LFE Enabled)
    Description Specification Typical1
    500 Hz to 900 Hz --± 0.1
    900 Hz to 1 kHz± 1.0± 0.1
    1 kHz to 10 kHz± 1.0± 0.1
    10 kHz to 100 kHz± 1.0± 0.1
    100 kHz to 1 MHz± 1.0± 0.15
    1 MHz to 5 MHz± 1.0± 0.15
    5 MHz to 10 MHz± 1.0± 0.2
    10 MHz to 50 MHz± 1.0± 0.2
    50 MHz to 100 MHz± 1.0± 0.2
    Table50. Power Level Linearity1 (dB), All Options - Specification
    Description Ports213
    -25 dBm ≤ P &lt;-20 dBm
    Ports213
    -20 dBm ≤ P &lt;-15 dBm
    Ports213
    -15 dBm ≤ P ≤ Max Specified
    2 Either port can be used as the source port. Source in filtered mode.
    Table51. Power Level Linearity1 (dB), All Options - Specification
    Description Ports224
    -25 dBm ≤ P &lt;-20 dBm
    Ports224
    -20 dBm ≤ P ≤ Max Specified Port Power
    10 MHz to 50 MHz3± 4.0± 2.0
    50 MHz to 500 MHz3± 2.7± 1.5
    500 MHz to 10 GHz3± 2.5± 1.5
    10 GHz to 16 GHz± 2.0± 1.5
    16 GHz to 67 GHz± 1.5± 1.5
    1 Referenced to nominal power.
    2 Either port can be used as the source port.
    Table52. Power Level Linearity1 (dB), Option224 - Specification
    Description Source2 Out12
    -15 dBm ≤ P ≤ Max Specified Port Power
    Source2 Out2
    -15 dBm ≤ P ≤ Max Specified Port Power
    10 MHz to 50 MHz3± 2.0± 2.0
    50 MHz to 67 GHz3± 1.5± 1.5
    2 Source in filtered mode.
    Table 53. Power Level Linearity1 (dB), All Ports, Option 425 and Option425 with029 or E29 (LFE Enabled)
    二、说明规格
    条件：1 Referenced to nominal power, from - 25 dBm to max power.
    500 Hz to 900 Hz --
    900 Hz to 100 MHz
    ±1.0
    Table 54. Power Sweep Range (dB), Options
    201 or 401
    DescriptionSpecificationTypical
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports124
    10 MHz to 50 MHz 37 374644
    50 MHz to 500 MHz 38 384747
    500 MHz to 1 GHz 38 384647
    1 GHz to 2 GHz 38 384547
    2 GHz to 3.2 GHz 35 384344
    3.2 GHz to 10 GHz 38 384545
    10 GHz to 13.5 GHz 36 364342
    13.5 GHz to 16 GHz 37 374343
    16 GHz to 19 GHz 35 354242
    19 GHz to 24 GHz 36 364242
    24 GHz to 26.5 GHz 36 364141
    26.5 GHz to 30 GHz 35 354141
    30 GHz to 32 GHz 32 323939
    32 GHz to 35 GHz 34 344040
    35 GHz to 40 GHz 30 303636
    40 GHz to 67 GHz 35 354040
    67 GHz to 70 GHz -- --3939
    1 Either port can be used as the source port. Source in Hi Power mode where applicable.
    Table 55. Power Sweep Range (dB), Options219 or419
    DescriptionSpecificationTypical
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports124
    10 MHz to 50 MHz 36 364644
    50 MHz to 500 MHz 38 384747
    500 MHz to 1 GHz 38 384647
    1 GHz to 2 GHz 38 384547
    2 GHz to 3.2 GHz 34 384244
    3.2 GHz to 10 GHz 36 374545
    10 GHz to 13.5 GHz 34 344242
    13.5 GHz to 16 GHz 35 354242
    16 GHz to 19 GHz 33 334040
    19 GHz to 24 GHz 33 333939
    24 GHz to 30 GHz 32 323939
    30 GHz to 32 GHz 30 303737
    32 GHz to 35 GHz 31 313838
    35 GHz to 40 GHz 26 263535
    40 GHz to 50 GHz 31 313737
    50 GHz to 60 GHz 30 303737
    60 GHz to 64 GHz 29 293737
    64 GHz to 67 GHz 29 293636
    67 GHz to 70 GHz -- --3333
    1 Either port can be used as the source port. Source in Hi Power mode where applicable.
    Table 56. Power Sweep Range (dB), Options224 or423
    DescriptionSpecificationTypical
    Ports1 1, 3 Ports1 2, 4 Ports1 1, 3 Ports124
    10 MHz to 50 MHz 35 354544
    50 MHz to 500 MHz 38 384646
    500 MHz to 1 GHz 38 384546
    1 GHz to 2 GHz 38 384446
    2 GHz to 3.2 GHz 34 384143
    3.2 GHz to 10 GHz 36 374444
    10 GHz to 13.5 GHz 33 334141
    13.5 GHz to 16 GHz 34 344141
    16 GHz to 19 GHz 32 323939
    19 GHz to 24 GHz 32 323838
    24 GHz to 30 GHz 31 313838
    30 GHz to 32 GHz 29 293636
    32 GHz to 35 GHz 30 303737
    35 GHz to 40 GHz 25 253434
    40 GHz to 50 GHz 30 303737
    50 GHz to 60 GHz 29 293636
    60 GHz to 64 GHz 27 273636
    64 GHz to 67 GHz 27 273535
    1 Either port can be used as the source port. Source in Hi Power mode where applicable.
    Table57. Power Sweep Range (dB), Option224
    DescriptionSpecificationTypical
    Source 2 Out 11 Source 2 Out 2 Source 2 Out 11 Source2 Out2
    10 MHz to 50 MHz 38 384544
    50 MHz to 500 MHz 42 404848
    500 MHz to 1 GHz 41 404748
    1 GHz to 2 GHz 40 404648
    2 GHz to 3.2 GHz 35 404145
    3.2 GHz to 10 GHz 39 414647
    10 GHz to 13.5 GHz 37 374446
    13.5 GHz to 16 GHz 38 384445
    16 GHz to 24 GHz 36 374444
    24 GHz to 30 GHz 36 374343
    30 GHz to 32 GHz 34 354141
    32 GHz to 35 GHz 36 364242
    35 GHz to 40 GHz 31 314040
    40 GHz to 50 GHz 36 364344
    50 GHz to 67 GHz 37 394445
    1 Source in Hi Power mode where applicable.
    Table 58. Power Sweep Range (dB), Options224 or423 with 029 or E291
    DescriptionSpecificationTypical
    Ports 1, 32 Ports 2, 42 Ports 1, 32 Ports242
    10 MHz to 50 MHz 35 354544
    50 MHz to 500 MHz 38 384646
    500 MHz to 1 GHz 38 384546
    1 GHz to 2 GHz 38 384446
    2 GHz to 3.2 GHz 34 384143
    3.2 GHz to 10 GHz 34 354343
    10 GHz to 13.5 GHz 30 304040
    13.5 GHz to 16 GHz 31 314141
    16 GHz to 19 GHz 29 293939
    19 GHz to 24 GHz 29 293838
    24 GHz to 30 GHz 29 293737
    30 GHz to 32 GHz 27 273535
    32 GHz to 35 GHz 28 283636
    35 GHz to 40 GHz 23 233333
    40 GHz to 50 GHz 29 293535
    50 GHz to 60 GHz 28 283434
    60 GHz to 67 GHz 26 263333
    1 Option 029 or E29 affects port 1 and port 2 power sweep ranges. Refer to Table 56 and Table 57 for ports3 and4 .
    2 Source in Hi Power mode where applicable.
    Table59. Power Sweep Range (dB), Option425
    说明规格 (dBm) 典型值 (dBm)
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled perf ormance ≤ 100 MHz, see Table 61 .
    Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port
    4
    10 MHz to 50 MHz1 26 26 26 26 38 37 38
    37
    50 MHz to 500 MHz1 33 33 33 33 40 41 40
    41
    500 MHz to 2 GHz 33 33 33 33 39 41 39
    41
    2 GHz to 3.2 GHz 32 36 32 36 39 41 39
    41
    3.2 GHz to 10 GHz 34 35 34 35 42 42 42
    42
    10 GHz to 13.5 GHz 31 31 31 31 39 39 39
    39
    13.5 GHz to 16 GHz 32 32 32 32 39 39 39
    39
    16 GHz to 19 GHz 30 30 30 30 37 37 37
    37
    19 GHz to 24 GHz 31 31 31 31 37 37 37
    37
    24 GHz to 26.5 GHz 30 30 30 30 37 37 37
    37
    26.5 GHz to 30 GHz 30 30 30 30 37 37 37
    37
    30 GHz to 32 GHz 27 27 27 27 34 34 34
    34
    32 GHz to 35 GHz 28 28 28 28 35 35 35
    35
    35 GHz to 40 GHz 24 24 24 24 33 33 33
    33
    40 GHz to 50 GHz 29 29 29 29 36 36 36
    36
    50 GHz to 60 GHz 28 28 28 28 35 35 35
    35
    60 GHz to 67 GHz 26 26 26 26 34 34 34
    34
    Table 60. Power Sweep Range (dB), Option
    425 with 029 or E29
    说明规格 (dBm) 典型值 (dBm)
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 61 .
    Table 62. Nominal Power (Preset Power, dBm)
    Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port
    4
    10 MHz to 50 MHz1 26 26 26 26 38 37 38
    37
    50 MHz to 500 MHz1 33 33 33 33 40 41 40
    41
    500 MHz to 2 GHz 33 33 33 33 39 41 39
    41
    2 GHz to 3.2 GHz 32 36 32 35 39 41 39
    40
    3.2 GHz to 10 GHz 32 33 34 35 41 41 42
    42
    10 GHz to 13.5 GHz 29 29 31 31 38 38 39
    39
    13.5 GHz to 16 GHz 29 29 32 32 39 39 39
    39
    16 GHz to 19 GHz 27 27 30 30 37 37 37
    37
    19 GHz to 24 GHz 28 28 31 31 37 37 37
    37
    24 GHz to 26.5 GHz 28 28 30 30 36 36 37
    37
    26.5 GHz to 30 GHz 28 28 30 30 36 36 37
    37
    30 GHz to 32 GHz 25 25 27 27 33 33 34
    34
    32 GHz to 35 GHz 26 26 28 28 34 34 35
    35
    35 GHz to 40 GHz 22 22 24 24 32 32 33
    33
    40 GHz to 50 GHz 28 28 29 29 34 34 36
    36
    50 GHz to 60 GHz 27 27 28 28 33 33 35
    35
    60 GHz to 67 GHz 25 25 26 26 32 32 34
    34
    Table 61. Power Sweep Range (dB) –Option 425 and Option
    425 with 029 or E29 (LFE Enabled)
    Description Specification Typical1
    500 Hz to 900 Hz --
    39
    900 Hz to 1 kHz 35
    40
    1 kHz to 10 kHz 37
    40
    10 kHz to 100 kHz 37
    41
    100 kHz to 1 MHz 37
    41
    1 MHz to 5 MHz 35
    40
    5 MHz to 10 MHz 34
    38
    10 MHz to 50 MHz 33
    37
    50 MHz to 100 MHz 33
    37
    说明规格 (dBm) 典型值 (dBm)
    201
    401
    Options
    219
    419, 224
    423
    Option 224 Options 224, 423
    425
    Ports1
    1, 2, 3
    4
    Ports1
    1, 2, 3
    4
    Source
    2
    Out
    1
    Source
    2
    Out
    2
    Source
    1
    Port
    1
    Combine Mode
    Source
    2
    Port
    1 Combine
    Preset Power 0 -5 0 0 -5
    -5
    1 Any port can be used as the source port.
    Table
    63. Power Resolution and Maximum/Minimum Settable Power, All Ports1
    说明规格 (dB) 典型值 (dBm)
    All Options All Options Options 201, 401 Options 219, 419
    224
    423
    425
    Power Resolution
    0.01 -- -- --
    最大值 Settable
    条件：2 For Option XSB power range, see Table 47 .
    Listed frequency is fundamental frequency; test at max specified power.
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 65 .
    Listed frequency is fundamental frequency; test at max specified power.
    Table 66. Non-Harmonic Spurs1 at Nominal Power (dBc), All Options, All Ports – Typical
    1 Non -harmonic spurs are negligible with Option 425 installed and LFE enabled.
    Power2 --
    30 -- --
    Minimum Settable Power2 -- -- -30
    -80
    1 Any port can be used as the source por t.
    Table 64.
    2nd and 3rd Harmonics at Max Specified Power (dBc), All Options - Typical
    Description 2nd Harmonic
    3rd Harmonic
    Ports
    3
    Source 2 Out
    11
    Ports
    4
    Source 2 Out
    2
    Ports
    3
    Source 2 Out
    11
    Ports
    4
    Source 2 Out
    2
    10 MHz to 50 MHz2 -45 -16 -49
    -16
    50 MHz to 2 GHz2 -59 -22 -65
    -15
    2 GHz to 13.5 GHz -62 -21 -65
    -20
    13.5 GHz to 23.4 GHz -60 -60 -60
    -60
    23.4 GHz to 35 GHz -60
    -60 -- --
    1 At the same level as the maximum specified power for Port
    1.
    2 With an LFE option installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above
    100 MHz, performance is the
    Table 65. 2nd and 3rd Harmonics at Max Specified Power (dBc), All Ports, Option
    425 (LFE Enabled) - Typical
    Description 2nd Harmonic
    3rd Harmonic
    500 Hz to 900 Hz -32
    -31
    900 Hz to 1 kHz -22
    -23
    1 kHz to 10 kHz -22
    -23
    10 kHz to 100 kHz -22
    -23
    100 kHz to 1 MHz -25
    -22
    1 MHz to 5 MHz -28
    -24
    5 MHz to 10 MHz -27
    -22
    10 MHz to 33 MHz -28
    -21
    33 MHz to 50 MHz
    -28 --
    Listed frequency is Source CW frequency, tested at 0 dBm.
    Description Non-Harmonic
    ±600 MHz Tracking Spur
    10 MHz to 1 GHz -80
    -80
    1 GHz to 10 GHz -85
    -81
    10 GHz to 20 GHz -82
    -75
    20 GHz to 31 GHz -80
    -70
    31 GHz to 50 GHz -77
    -67
    50 GHz to 67 GHz -76
    -62
    Tracking Spurs (Linear Frequency Scale)
    Tracking Spurs (Logarithmic Frequency Scale) 1 GHz 10 GHz 20 GHz 31 GHz 50 GHz
    67 GHz
    源频率
    -105
    -100
    -95
    -90
    -85
    -80
    -75
    -70
    -65
    -60
    杂散电平 (dBc)
    Tracking Spurs (Typical)
    ±600 MHz Offset
    Expected Range of ±100 MHz, ±300 MHz, ±900 MHz, ±1200 MHz, ±2400 MHz Offsets 10 MHz 100 MHz 1 GHz 10 GHz
    67 GHz
    源频率
    -105
    -100
    -95
    -90
    -85
    -80
    -75
    -70
    -65
    -60
    杂散电平 (dBc)
    条件：Phase Noise with Option UNY (Typical)
    Phase Noise with Option UNY (Supplemental Performance Data) 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz
    Tracking Spurs (Typical)
    ±600 MHz Offset
    Expected Range of ±100 MHz, ±300 MHz, ±900 MHz, ±1200 MHz
    ±2400 MHz Offsets
    Table 67. Phase Noise (dBc/Hz), All Options, with UNY, Port
    3, Src2Out1 - Typical
    CW Frequency 100 Hz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 MHz Offset
    10 MHz Offset
    1 GHz -112 -132 -137 -143 -145
    -144
    5 GHz -103 -123 -132 -135 -147
    -150
    10 GHz -96 -116 -126 -130 -142
    -146
    20 GHz -91 -111 -118 -123 -135
    -139
    26.5 GHz -87 -106 -115 -121 -131
    -135
    Table 68. Phase Noise (dBc/Hz), All Options, with UNY, Port
    4, Src2Out2 - Typical
    CW Frequency 100 Hz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 MHz Offset
    10 MHz Offset
    1 GHz -111 -121 -132 -145 -149
    -149
    5 GHz -103 -122 -128 -134 -145
    -149
    10 GHz -96 -112 -120 -127 -140
    -147
    20 GHz -90 -108 -116 -123 -134
    -139
    26.5 GHz -86 -106 -114 -121 -131
    -135
    Table
    69. Phase Noise (dBc/Hz), All Options, with UNY, All Ports – Supplemental Performance Data
    CW Frequency 100 Hz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 MHz Offset
    10 MHz Offset
    43.5 GHz -82 -106 -113 -117 -129
    -135
    50 GHz -81 -101 -109 -116 -127
    -132
    67 GHz -81 -101 -111 -114 -126
    -131
    偏置频率
    -160
    -150
    -140
    -130
    -120
    -110
    -100
    -90
    -80
    -70
    相位噪声 (dBc/Hz)
    条件：Phase Noise, with Option UNY, Port 1, 3, Src2Out1 (Typical)
    CW
    1 GHz
    CW
    5 GHz
    CW
    10 GHz
    CW
    20 GHz
    CW
    26.5 GHz
    100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
    100 MHz
    偏置频率
    -160
    -150
    -140
    -130
    -120
    -110
    -100
    -90
    -80
    -70
    相位噪声 (dBc/Hz)
    条件：Phase Noise, with Option UNY, All Ports (Supplemental Performance Data)
    Phase Noise, CW 10 GHz, with Option UNY and without Option UNY (Typical)
    CW
    43.5 GHz
    CW
    50 GHz
    CW
    67 GHz
    Table 70. Phase Noise (dBc/Hz), Option 425
    425 with 029 or E29, and with UNY, All Ports (LFE Enabled) - Typical
    Description 1 kHz Offset 10 kHz Offset 100 kHz Offset
    1 MHz Offset
    500 Hz to 100 MHz -120 -130 -125
    -135
    Table
    71. Phase Noise (dBc/Hz), All Options, without UNY, All Ports - Typical
    CW Frequency 100 Hz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 MHz Offset
    10 MHz Offset
    1 GHz -94 -116 -130 -141 -145
    -146
    5 GHz -83 -106 -119 -128 -139
    -147
    10 GHz -78 -100 -113 -122 -133
    -142
    20 GHz -72 -94 -107 -116 -127
    -135
    26.5 GHz -67 -90 -104 -114 -124
    -132
    Table
    72. Phase Noise (dBc/Hz), All Options, without UNY, All Ports – Supplemental Performance Data
    CW Frequency 100 Hz Offset 1 kHz Offset 10 kHz Offset 100 kHz Offset 1 MHz Offset
    10 MHz Offset
    43.5 GHz -70 -90 -103 -112 -122
    -130
    50 GHz -66 -86 -101 -111 -121
    -130
    67 GHz -64 -85 -99 -108 -119
    -127
    测试端口输入
    Table 73. Noise Floor1 (dBm) @
    10 Hz IFBW, All Options, All Ports
    输入测试端口 Direct 接收机 Access
    条件：3 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 74 .
    Input 10 MHz to 50 MHz2, 3 -70 -100 -76 -106 50 MHz to 100 MHz2, 3 -92 -105 -98 -111 100 MHz to 500 MHz2 -100 -113 -107
    -120
    500 MHz to 1 GHz -110 -123 -116
    -129
    1 GHz to 10 GHz -115 -127 -119
    -131
    10 GHz to 13.5 GHz -116 -128 -121
    -133
    13.5 GHz to 16 GHz -117 -129 -121
    -133
    16 GHz to 26.5 GHz -118 -129 -122
    -133
    26.5 GHz to 35 GHz -106 -117 -110
    -121
    35 GHz to 40 GHz -105 -116 -110
    -121
    40 GHz to 50 GHz -102 -112 -108
    -118
    50 GHz to 60 GHz -101 -110 -107
    -116
    60 GHz to 67 GHz -100 -108 -107
    -115
    67 GHz to 70 GHz -- -- -95
    -101
    1 Total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dBm.
    2 May typically be degraded at particular frequencies below
    500 MHz due to spurious receiver residuals.
    Table 74. Test Port Noise Floor (dBm) @ 10 Hz IFBW Option
    425 (LFE Enabled)
    输入测试端口 Direct 接收机 Access
    DescriptionSpecificationTypical
    500 Hz to 900 Hz ---93
    900 Hz to 1 kHz-90-96
    1 kHz to 10 kHz-91-96
    10 kHz to 100 kHz-101-105
    100 kHz to 1 MHz-107-110
    1 MHz to 5 MHz-108-112
    5 MHz to 10 MHz-102-106
    10 MHz to 50 MHz-102-106
    50 MHz to 100 MHz-102-106
    1May be degraded at 100 MHz due to spurious receiver residuals.
    Table75.0.1 dB Compression, All Options, All Ports - Typical
    输入测试端口 Direct 接收机 Access
    条件：1 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table Table 76 .
    Description10 MHz to 10 GHz10 GHz to 30 GHz30 GHz to 67 GHz
    Table76.0.1 dB Compression, All Ports, Option425 (LFE Enabled) - Typical
    输入测试端口 Direct 接收机 Access
    Description500 Hz to 900 Hz900 Hz to 1 kHz1 kHz to 10 kHz
    10 kHz to 100 kHz13
    100 kHz to 1 MHz13
    1 MHz to 5 MHz11
    5 MHz to 10 MHz13
    10 MHz to 50 MHz14
    50 MHz to 100 MHz14
    Table 77. Compression, All Ports, Option425 (LFE Enabled)- Specification
    说明测试端口功率 (dBm) 接收机压缩点
    All Options Magnitude (dB) Phase (degrees) 500 Hz to 900 Hz -- -- -- 900 Hz to 1 kHz 10 0.2 1 1 kHz to 10 kHz 12 0.2
    1
    10 kHz to 100 kHz 12 0.2
    1
    100 kHz to 1 MHz 12 0.2
    1
    1 MHz to 5 MHz 10 0.2
    1
    5 MHz to 10 MHz 9 0.2
    1
    10 MHz to 50 MHz 8 0.2
    1
    50 MHz to 100 MHz 8 0.2
    1
    说明测试端口功率接收机压缩点
    Options 201
    401
    Options 219
    419
    Options 224, 423, 425 Magnitude (dB) Phase (degree) 500 MHz to 3.2 GHz1 13 13 13 0.15 1.2 3.2 GHz to 10 GHz 13 12 12 0.15
    1.2
    10 GHz to 13.5 GHz 11 9 8 0.15
    1.2
    13.5 GHz to 16 GHz 12 10 9 0.15
    1.2
    16 GHz to 19 GHz 10 8 8 0.15
    1.2
    19 GHz to 26.5 GHz 11 8 8 0.15
    1.2
    26.5 GHz to 30 GHz 10 8 8 0.15
    1.2
    30 GHz to 32 GHz 8 8 8 0.15
    1.2
    32 GHz to 35 GHz 9 8 8 0.15
    1.2
    35 GHz to 40 GHz 8 8 8 0.15
    1.2
    40 GHz to 67 GHz 10 8 8 0.15
    1.2
    1 Test port receiver compression at input levels below
    500 MHz is negligible due to coupler roll off.
    Table
    79. Trace Noise1 Magnitude (dB rms)
    说明测试端口功率接收机压缩点
    条件：1 Ratioed measurement, nominal power at test port.
    2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled perf ormance ≤ 100 MHz, see Table 80 .
    DescriptionSpecificationTypical
    1 kHz IFBW 1 kHz IFBW100 kHz IFBW600 kHz IFBW
    10 MHz to 50 MHz2 0.05 0.02490.2400.580
    50 MHz to 100 MHz2 0.006 0.00170.0160.040
    100 MHz to 500 MHz 0.002 0.00070.0070.016
    500 MHz to 1 GHz 0.002 0.00040.0030.007
    1 GHz to 26.5 GHz 0.002 0.00050.0030.006
    26.5 GHz to 43.5 GHz 0.003 0.00080.0080.017
    43.5 GHz to 67 GHz 0.003 0.00090.0080.017
    67 GHz to 70 GHz -- 0.00150.0230.028
    Table80. Trace Noise1 Magnitude (dB rms), All Ports, Option425 (LFE Enabled)
    说明测试端口功率接收机压缩点
    条件：1 Ratioed measurement, nominal power at test port.
    DescriptionSpecificationTypical
    100 Hz IFBW 1 kHz IFBW 100 Hz IFBW 1 kHz IFBW100 kHz IFBW600 kHz IFBW
    500 Hz to 900 Hz -- --0.002 -- -- --
    900 Hz to 4 kHz0.004 --0.001 -- -- --
    4 kHz to 300 kHz --0.004 --0.002 -- --
    300 kHz to 2 MHz -- 0.004 --0.0010.01 --
    2 MHz to 100 MHz -- 0.004 -- 0.0010.010.025
    Table81. Trace Noise1 Phase (deg rms)
    说明测试端口功率接收机压缩点
    条件：1 Ratioed measurement, nominal power at test port.
    2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 82 .
    DescriptionSpecificationTypical
    1 kHz IFBW 1 kHz IFBW100 kHz IFBW600 kHz IFBW
    10 MHz to 50 MHz2 0.40 0.14411.4004.000
    50 MHz to 100 MHz2 0.04 0.00950.0920.220
    100 MHz to 500 MHz 0.02 0.00460.0440.110
    500 MHz to 1 GHz 0.02 0.00180.0170.041
    1 GHz to 26.5 GHz 0.02 0.00750.0160.039
    26.5 GHz to 43.5 GHz 0.03 0.01200.0440.130
    43.5 GHz to 50 GHz 0.03 0.01930.0550.130
    50 GHz to 67 GHz 0.04 0.01930.0550.130
    67 GHz to 70 GHz -- 0.02000.0860.200
    Table82. Trace Noise1 Phase (deg rms), All Ports, Option425 (LFE Enabled)
    说明测试端口功率接收机压缩点
    条件：1 Ratioed measurement, nominal power at test port.
    DescriptionSpecificationTypical
    100 Hz IFBW 1 kHz IFBW 100 Hz IFBW 1 kHz IFBW100 kHz IFBW600 kHz IFBW
    500 Hz to 900 Hz -- --0.012 -- -- --
    900 Hz to 4 kHz0.03 --0.008 -- -- --
    4 kHz to 300 kHz --0.03 --0.014 -- --
    300 kHz to 2 MHz -- 0.03 --0.0070.064 --
    2 MHz to 100 MHz -- 0.03 -- 0.0070.0680.166
    说明 Magnitude (dB) 相位 (°)
    Range ±500
    ±500
    Resolution 0.001
    0.01
    Table
    84. Stability1 - Typical
    说明 Magnitude (dB) 相位 (°)
    条件：1 Stability is defined as a ratio measurement made at the test port.
    2 With Option 425 installed and LFE disabled, applied to frequencies ≤ 100 MHz. Above 100 MHz, performance is the
    same for both LFE enabled or disabled. For LFE enabled performance ≤ 100 MHz, see Table 85 .
    Description10 MHz to 50 MHz50 MHz to 16 GHz16 GHz to 20 GHz
    20 GHz to 50 GHz 0.020.7
    50 GHz to 67 GHz 0.031.0
    67 GHz to 70 GHz 0.051.1
    Table 85. Stability1, Option425 (LFE Enabled) - Typical
    说明 Magnitude (dB) 相位 (°)
    条件：1 Stability is defined as a ratio measurement made at the test port.
    Description500 Hz to 900 Hz900 Hz to 1 kHz1 kHz to 10 kHz
    10 kHz to 100 kHz 0.0100.2
    100 kHz to 1 MHz 0.0100.1
    1 MHz to 5 MHz 0.0100.1
    5 MHz to 10 MHz 0.0100.1
    10 MHz to 50 MHz 0.0100.1
    50 MHz to 100 MHz 0.0200.1
    Description RF (dBm) DC (V)
    Test Ports (All Options except those noted below) &gt; +24
    &gt;40
    Source 2 Out 1, Source 2 Out 2 (Option 224) &gt; +24
    &gt;0
    Test Port 1, Noise Mode1 (Option 029 or E29) &gt; +10
    &gt;40
    Test Port 2, Noise Mode1 (Option
    029 or E29 without Option
    425) &gt; +27
    &gt;40
    Test Ports (Option 425) &gt; +20
    &gt;50
    1 Noise mode sets port
    2 noise receiver switch to noise receiver position.
    Noise Receiver Input (Option
    029 and E29 only)
    Table
    87. Noise Receiver Bandwidth
    Description RF (dBm) DC (V)
    Description10 MHz to 25 MHz25 MHz to 60 MHz60 MHz to 150 MHz
    150 MHz to 67 GHz 800 kHz2/4/8/24 MHz1
    1 8 and 24 MHz bandwidths are available only with calibration using noise source.
    Table 88. Receiver Noise Figure (dB), Port2, at4 MHz BW, High Gain Setting, Option029
    Description RF (dBm) DC (V)
    DescriptionSpecificationTypical
    10 MHz to 50 MHz --9
    50 MHz to 1.5 GHz107
    1.5 GHz to 5 GHz1210
    5 GHz to 20 GHz1511
    20 GHz to 45 GHz1611
    45 GHz to 50 GHz1814
    Table 89. Receiver Noise Figure (dB), Port 2, at 4 MHz BW, High Gain Setting, Option425 with029
    Description RF (dBm) DC (V)
    DescriptionSpecificationTypical
    10 MHz to 50 MHz --9
    50 MHz to 1.5 GHz15.512.5
    1.5 GHz to 5 GHz1412
    5 GHz to 20 GHz1612
    20 GHz to 45 GHz1611
    45 GHz to 50 GHz1814
    Table 90. Receiver Noise Figure (dB), Port2, at4 MHz BW, High Gain Setting, Option E29
    Description RF (dBm) DC (V)
    DescriptionSpecificationTypical
    10 MHz to 50 MHz --9
    50 MHz to 1.5 GHz107
    1.5 GHz to 5 GHz1210
    5 GHz to 20 GHz1511
    20 GHz to 26.5 GHz1611
    26.5 GHz to 40 GHz1411
    40 GHz to 45 GHz1511
    45 GHz to 50 GHz1814
    50 GHz to 60 GHz1816
    60 GHz to 67 GHz2219
    Table 91. Receiver Noise Figure (dB), Port2, at4 MHz BW, High Gain Setting, Option 425 with E29
    Description RF (dBm) DC (V)
    DescriptionSpecificationTypical
    10 MHz to 50 MHz --9
    50 MHz to 1.5 GHz15.512.5
    1.5 GHz to 5 GHz1412
    5 GHz to 20 GHz1612
    20 GHz to 26.5 GHz1611
    26.5 GHz to 40 GHz1411
    40 GHz to 45 GHz1511
    45 GHz to 50 GHz1814
    50 GHz to 60 GHz1816
    60 GHz to 67 GHz2219
    Table92. Noise Figure Trace Noise1 (dB rms) at4 MHz BW, All Gain Settings
    Description RF (dBm) DC (V)
    DescriptionSpecificationTypical
    10 MHz to 50 MHz --0.07
    50 MHz to 67 GHz0.110.07
    1 Trace noise magnitude performance on noise figure trace or sometimes called noise jitter201 points1 noise average
    with terminated input . May typically be degraded at frequencies below500 MHz due to spurious noise receiver
    Table
    93. Noise Receiver Linearity (dB) at 4 MHz BW - Specification
    三、功率量程 (dBm) 规格
    低 Gain 设置
    Reference to -60dBm
    Medium Gain Setting
    Reference to -70 dBm
    高 Gain 设置
    Reference to -80 dBm
    -39 to -64 -50 to -76 -58 to -85
    ±0.05
    -64 to -70 -76 to -87 -85 to -92
    ±0.07
    Table 94. Noise Receiver Input Range, Option
    029 - Specification
    Description Max DUT NF + Gain (dB)1 Max Input Power (dBm)
    for &lt;0.1 dB Compression2
    Low Gain
    条件：1 Limited by 0.1 dB receiver compression. Applies to devices with bandwidth <400 MHz. For devices with higher
    bandwidth of the DUT in Hz, and use the Max Input Power specification .
    Setting 500 MHz to 4.5 GHz 37 53 68 ≤-51 ≤-35 ≤-20 4.5 GHz to 6 GHz 38 53 71 ≤-50 ≤-35 ≤-17 6 GHz to 24 GHz 47 57
    66 ≤-41 ≤-31 ≤-22
    24 GHz to 26.5 GHz 45 58
    66 ≤-43 ≤-30 ≤-22
    26.5 GHz to 36 GHz 45 56
    57 ≤-43 ≤-32 ≤-31
    36 GHz to 50 GHz 39 51
    58 ≤-49 ≤-37 ≤-30
    bandwidths, calculate the DUT output noise power as - 174 dBm +
    10*log10(B) + Gain (dB) + NF (dB), where B is the
    2 Derived from ensuring &lt; 0.25 dB compression with a CW signal
    5 dB higher than the stated max input power value for
    0.1 dB compression. Referenced to test port
    2 .
    Table
    95. Noise Receiver Input Range, Option E29 - Specification
    Description Max DUT NF + Gain (dB)
    1 Max Input Power (dBm)
    for &lt;0.1 dB Compression2
    Low Gain
    条件：1 Limited by 0.1 dB receiver compression. Applies to devices with bandwidth <400 MHz. For devices with higher
    Setting 500 MHz to 4.5 GHz 37 53 68 ≤-51 ≤-35 ≤-20 4.5 GHz to 6 GHz 38 53 71 ≤-50 ≤-35 ≤-17 6 GHz to 24 GHz 48 60
    67 ≤-40 ≤-28 ≤-21
    24 GHz to 26.5 GHz 48 60
    67 ≤-40 ≤-28 ≤-21
    26.5 GHz to 36 GHz 48 60
    65 ≤-40 ≤-28 ≤-23
    36 GHz to 50 GHz 41 53
    62 ≤-47 ≤-35 ≤-26
    50 GHz to 67 GHz 41 53
    62 ≤-47 ≤-35 ≤-26
    bandwidths, calculate the DUT output noise power as - 174 dBm +
    10*log10(B) + Gain (dB) + NF (dB), where B is the
    bandwidth of the DUT in Hz, and use the Max Input Power specification.
    2 Derived from ensuring &lt; 0.25 dB compression with a CW signal
    5 dB higher than the stated max input power value for
    0.1 dB compression. Referenced to test port
    2.
    Phase Noise Measurement Performance (with S930317B phase noise measurement
    application)1
    • Offset frequency range
    0.1 Hz to 10 MHz
    • Sweep speed (typical)
    34 seconds (1 Hz to 10 MHz offset in Normal mode)
    Table 96. Absolute Phase Noise Sensitivity (dBc/Hz), in Best mode - Supplemental Performance Data
    2
    Input Power level
    +5 dBm (-5 dBm at 50 GHz)
    相位噪声偏置频率
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -55 -88 -112 -127 -132 -134 -134 -134
    -134
    10 GHz -36 -69 -97 -117 -124 -130 -132 -136
    -137
    20 GHz -31 -64 -90 -111 -120 -124 -125 -132
    -134
    40 GHz -23 -58 -84 -104 -113 -117 -123 -125
    -129
    50 GHz -18 -54 -81 -100 -109 -113 -116 -121
    -123
    Table
    97. Absolute AM Noise Sensitivity (dBc/Hz), in Best mode - Supplemental Performance Data
    Input Power level
    +5 dBm (-5 dBm at 50 GHz)
    AM 噪声偏置频率
    条件：Table 98. Single-Channel Residual Phase Noise Sensitivity (dBc/Hz), with Option UNY in Best mode - Supplemental
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -96 -104 -110 -119 -128 -132 -132 -135
    -137
    10 GHz -97 -104 -110 -118 -128 -134 -135 -138
    -139
    20 GHz -96 -104 -112 -116 -125 -132 -129 -136
    -136
    40 GHz -93 -102 -109 -114 -123 -127 -130 -130
    -132
    50 GHz -91 -96 -105 -114 -119 -122 -117 -125
    -122
    1 The input frequency in the sensitivity tables in this section is limited to the highest frequency of the PNA -X model.
    2 For embedded- LO frequency converters, the frequency used for the table should be that of the embedded -LO.
    Absolute Phase Noise Sensitivity (dBc/Hz) - Supplemental Performance Data
    Single-Channel Residual Noise Measurement
    3
    Performance Data
    Input Power level: +10 dBm (+6 dBm at 40 GHz
    -2 dBm at 50 GHz)
    偏置频率
    条件：Table 99. Single-Channel Residual AM Noise Sensitivity (dBc/Hz), with Option UNY in Best mode - Supplemental
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -102 -110 -115 -123 -131 -136 -136 -137
    -137
    10 GHz -92 -99 -105 -113 -122 -131 -134 -139
    -140
    20 GHz -83 -93 -100 -112 -118 -125 -124 -132
    -136
    40 GHz -78 -85 -93 -106 -110 -122 -126 -128
    -129
    50 GHz -75 -81 -91 -102 -110 -120 -119 -125
    -125
    Performance Data
    Input Power level: +10 dBm (+6 dBm at 40 GHz
    -2 dBm at 50 GHz)
    偏置频率
    条件：than that of the DUT input signal supplied by the PNA internal signal source.
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -97 -104 -112 -120 -117 -128 -130 -134
    -138
    10 GHz -97 -106 -111 -120 -121 -129 -134 -137
    -142
    20 GHz -99 -104 -112 -120 -123 -120 -123 -130
    -136
    40 GHz -96 -102 -110 -117 -118 -128 -132 -131
    -133
    50 GHz -91 -99 -109 -114 -120 -125 -118 -125
    -127
    3 The data is when a THRU device is connected, in other words, when the input and output frequencies are the same.
    The single- channel residual noise measurement is used for the phase noise measurements for frequency converting
    devices, and the sensitivity is determined as the absolute phase noise sensitivity at the embedded -LO frequency (Table
    94). In the single -channel residual noise measurement mode, t he phase or AM noise of the DUT input signal is not
    measured. The measurement can be done when the phase or AM noise of the signal generated by the DUT is larger
    Single-Channel Residual Phase Noise Sensitivity (dBc/Hz) - Supplemental Performance Data
    Table
    100. Single-Channel Residual Phase Noise Sensitivity (dBc/Hz), without Option UNY in Best mode - Supplemental
    Performance Data
    4
    Input Power level: +10 dBm (+6 dBm at 40 GHz
    0 dBm at 50 GHz)
    偏置频率
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -94 -95 -100 -120 -133 -136 -138 -137
    -136
    10 GHz -77 -78 -83 -102 -114 -124 -129 -135
    -138
    20 GHz -70 -74 -75 -95 -109 -118 -127 -128
    -133
    40 GHz -64 -67 -70 -92 -102 -112 -116 -121
    -128
    50 GHz -61 -63 -66 -87 -101 -109 -113 -119
    -125
    Table
    101. Single-Channel Residual AM Noise Sensitivity (dBc/Hz), without Option UNY in Best mode - Supplemental
    Performance Data
    Input Power level: +10 dBm (+6 dBm at 40 GHz
    0 dBm at 50 GHz)
    偏置频率
    条件：than that of the DUT input signal supplied by the PNA internal signal source.
    Table 902. 2-Channel Residual Phase Noise Sensitivity (dBc/Hz) with Option UNY in Best mode - Supplemental
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -105 -110 -123 -125 -134 -138 -139 -143
    -138
    10 GHz -104 -110 -116 -125 -133 -134 -133 -141
    -141
    20 GHz -104 -109 -116 -127 -127 -126 -128 -133
    -137
    40 GHz -103 -110 -115 -125 -120 -130 -126 -130
    -132
    50 GHz -98 -106 -111 -121 -124 -125 -122 -129
    -129
    4 The data is when a THRU device is connected, in other words, when the input and output frequencies are the same.
    The single- channel residual noise measurement is used for the phase noise measurements for frequency converting
    devices, and the sensitivity is determined as the absolute phase noise sensitivity at the embedded -LO frequency (Table
    94). In the single -channel residual noise measurement mode, t he phase or AM noise of the DUT input signal is not
    measured. The measurement can be done when the phase or AM noise of the signal generated by the DUT is larger
    2-Channel Residual Noise Measurement for Non-Frequency Converting Devices5
    Performance Data
    Input Power level: +10 dBm (+6 dBm at 40 GHz
    -3 dBm at 50 GHz)
    偏置频率
    条件：Table 103. 2-Channel Residual AM Noise Sensitivity (dBc/Hz) with Option UNY in Best mode - Supplemental
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -107 -116 -127 -134 -132 -134 -131 -133
    -132
    10 GHz -101 -110 -120 -126 -134 -135 -134 -138
    -136
    20 GHz -99 -105 -113 -120 -128 -131 -129 -134
    -135
    40 GHz -93 -101 -109 -115 -121 -124 -125 -126
    -127
    50 GHz -90 -99 -106 -113 -117 -118 -119 -120
    -120
    Performance Data
    Input Power level: +10 dBm (+6 dBm at 40 GHz
    -3 dBm at 50 GHz)
    偏置频率
    Input Frequency 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 300 kHz 1 MHz
    10 MHz
    1 GHz -99 -106 -109 -120 -131 -133 -138 -137
    -134
    10 GHz -95 -105 -113 -121 -130 -134 -136 -139
    -139
    20 GHz -96 -104 -113 -120 -129 -128 -129 -136
    -136
    40 GHz -98 -107 -112 -118 -120 -127 -129 -130
    -131
    50 GHz -93 -102 -110 -115 -120 -121 -119 -122
    -122
    5 Both the phase or AM noise of the DUT input signal and that of the DUT output signal are measured.
    2-Channel Residual Phase Noise Sensitivity (dBc/Hz) - Supplemental Performance Data
    Dynamic 精度 · Table 104. Dynamic 精度 - 规格
    Standard receiver accuracy of the test port input power reading relative to the reference input power
    • 压缩点 over 频率
    条件：Receiver Dynamic Accuracy Specifications and Uncertainties”. generate the curves for your PNA.
    • IF linearity at a single frequency of 99.6 MHz or 1.998765 GHz using a reference level of -20
    dBm for an input power range of 0 to -60 dBm. For value below
    -60 dBm, refer to “VNA
    四、Dynamic Accuracy, 100 MHz (LFE Enabled) - Specifications
    Dynamic Accuracy
    10 MHz
    plots valid · 全部选件
    Dynamic Accuracy
    50 MHz
    Dynamic Accuracy
    500 MHz
    Dynamic Accuracy
    1 GHz
    Dynamic Accuracy
    2 GHz
    Dynamic Accuracy
    20 GHz
    Dynamic Accuracy
    26.5 GHz
    Dynamic Accuracy
    35 GHz
    Dynamic Accuracy
    40 GHz
    Dynamic Accuracy
    50 GHz
    Dynamic Accuracy
    60 GHz
    Dynamic Accuracy
    67 GHz
    Table
    9105. Test Port Input (Group Delay)1
    说明典型值性能
    Aperture (selectable) (frequency span)/(number of points
    -1)
    Maximum Aperture
    20% of frequency span
    Range
    0.5 x (1/minimum aperture)
    Maximum Delay Limited to measuring no more than
    180° of phase change within the
    精度见 graph below
    条件：In general, the following formula can be used to determine the accuracy, in seconds, of specific group delay measurement:
    Depending on the aperture and device length, the phase accuracy used is either incremental phase accuracy or worst-case phase accuracy.
    The following graph shows characteristic group delay accuracy with full 2-port calibration and a
    10 Hz IF bandwidth. Insertion loss is
    assumed to be &lt;
    2 dB and electrical length to be ten meters.
    For any Sij Group Delay measurement, Sii = 0, Sij = 1, Sji = 0, Skl =
    0 for all kl ≠ ij
    ±Phase Accuracy (deg)/[360 × Aperture (Hz)]
    1 Group delay is computed by measuring the phase change within a specified frequency step (determined by the
    General Information
    Table
    106. Miscellaneous Information
    说明补充信息
    条件：System IF Bandwidth Range 1 Hz to 15 MHz, nominal (7 MHz, 10 MHz, and 15 MHz IFBWs are available ONLY
    with FW A.09.42 and later, and with DSP version
    5)
    CPU For the latest information on CPUs and associated hard drives, visit: PNA Hard Drives
    and CPUs (keysight.com)
    LXI CPU version 7.0, 8.0 CPU version
    9.0
    Class C LXI
    1.5
    Extended Functions
    HiSLIP; VSI-11 Discovery and
    Maximum Number of Points
    100003
    Table
    107. Front Panel Information, All Options
    RF 连接器
    条件：Test Ports 1.85 mm (male), 50 ohm (nominal), 0.002 in. Center Pin Recession (characteristic)
    Jumpers
    1.85 mm (female) connectors with 1.85 mm (male) jumper cables
    USB
    2.0 Ports - Primary (4 ports)
    Standard Compatible with USB
    2.0
    Size 31 cm (12.1 in) diagonal color active matrix LCD; 1280 (horizontal) X
    800 (vertical)
    条件：Pixels Any of the following would cause a display to be considered faulty:
    Refresh Rate Vertical 60 Hz; Horizontal
    49.31 kHz
    • A complete row or column consists of “stuck” or “dark” pixels.
    • More than six “stuck on” pixels (but not more than three green) or more than
    0.002%
    of the total pixels are within the LCD specifications
    • More than twelve “dark” pixels (but no more than seven of the same color) or more
    than 0.004% of the total pixels are within the LCD specifications.
    • Two or more consecutive "stuck on" pixels or three or more consecutive "dark" pixel
    (but no more than one set of two consecutive dark pixels)
    • “Stuck on” pixels or more than two “dark” pixels less than
    6.5 mm apart (excluding
    显示范围
    Magnitude ±2500 dB (at
    500 dB/div), max
    Phase ±2500° (at
    500 degrees/div), max
    Polar
    10 pUnits, min
    10,000 Units, max
    显示分辨率
    Magnitude
    0.001 dB/div, min
    Phase
    0.01°/div, min
    标记分辨率
    Magnitude
    0.001 dB, min
    Phase
    0.01°, min
    Polar
    10 pUnit, min
    Table
    108. Rear Panel Information, All Options
    Description Typical Performance
    10 MHz Reference In
    连接器 BNC, female
    Input Frequency 10 MHz ±1 ppm, 100 MHz
    ±1 ppm
    20 MHz ±1 ppm, 80 MHz
    ±1 ppm
    Input Level 10 MHz
    -15 dBm to +20 dBm
    100 MHz
    -10 dBm to +20 dBm
    Input Impedance
    50 Ω, nom.
    10 MHz Reference Out
    连接器 BNC, female
    Output Frequency 10 MHz ±0.7 ppm, 100 MHz
    ±0.7 ppm
    信号类型 Sine Wave
    Output Level +10 dBm ±4 dB into
    50 Ω
    Output Impedance
    50 Ω, nominal
    Harmonics &lt;-40 dBc, typical
    SRC3 (Option XSB)
    连接器 SMA, female
    Output Frequency
    10 MHz to 13.5 GHz
    Typical Output Power Range See Table
    47
    外部 IF 输入
    Function Allows use of external IF signals from remote mixers, bypassing the PNA's first converters
    Connectors SMA (female); A, B, C, D, R (4-port); A, B, R1, R2 (2-port)
    Narrowband IF path
    DSP Version
    4 or 5
    IF Bandwidth
    ≤ 600 kHz
    1 MHz
    1.5 MHz
    2 MHz
    3 MHz
    5 MHz
    7 MHz
    10 MHz
    15 MHz
    RF Frequency
    &lt; 53 MHz
    &gt;=
    53 MHz
    IF Frequency 2.479339 MHz 7.438017 MHz
    7.692 MHz
    7.368 MHz
    8.450 MHz
    8.163 MHz
    6.897 MHz
    10.53 MHz
    15.38 MHz
    22.22 MHz
    10.70 MHz
    Input Impedance
    50 Ω
    RF Damage Level
    +23 dBm
    DC Damage Level
    5.5 VDC
    0.1 dB Compression Point
    Narrowband IF path
    -9.0 dBm at 7.438 MHz
    -17 dBm at 10.70 MHz
    Pulse I/O Connector 15-pin mini D-sub (for pin assignment information, refer to the PNA online help)
    脉冲输入 (IF Gates)
    条件：Drive Voltage 0 V (off), +3.3 V (on), nominal
    Function Internal receiver gates used for point-in-pulse and pulse-profile measurements
    Input Impedance
    1 K Ohm
    Source Modulators
    20 ns
    Receiver Gates
    20 ns
    DC Damage Level
    5.5 VDC
    RF Pulse Modulator Input (Source Modulator)
    On/Off Ratio 10 MHz to 3.2 GHz -64 dB 3.2 GHz to 67 GHz
    -80 dB
    Pulse Period
    Minimum
    20 ns
    Maximum
    70 s
    脉冲输出
    Voltage (TTL) High
    3.3V to 3.5V
    Low
    &lt;1V
    Impedance
    50 Ohm
    Function Used for driving remote mixers
    Connections
    3.5 mm (female)
    RF Output Frequency Range
    3.2 GHz to 19 GHz
    LO Output Frequency Range
    0.01 GHz to 26.5 GHz
    Rear Panel LO Power Upper Limit, Typical (dBm) Lower Limit, Typical (dBm)
    10 MHz to 1.7 GHz -- --
    1.7 GHz to 6.759 GHz
    -3
    6.759 GHz to 15.5 GHz 0
    -6
    15.5 GHz to 26.5 GHz
    -5
    Rear Panel RF Power Maximum Output Power, Typical (dBm) 3.2 GHz to 5 GHz +3 5 GHz to 19 GHz
    +8
    Bias Tee Inputs
    Connectors BNC(f) for ports 1, 2
    3 and 4
    Fuse
    500 mA, bi-pin style
    以上指标摘自厂家官方数据手册，完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
    是德科技 | KEYSIGHT · onetest 仪器资源库

    全部

     

    是德科技官方渠道


    官方渠道（官网 / 热线 / 邮箱）


    • 销售服务热线

    800-810-0189（座机）／400-810-0189（手机） 工作时间 周一至周五 8:30-17:30


    • 热线传真

    800-820-2816（座机）／400-820-3863（手机）


    • 亚洲区支持邮箱　tm_asia@keysight.com


    • 服务与支持邮箱

    instruments_services@keysight.com


    • 官网

    www.keysight.com（中国站 www.keysight.com.cn）


    全国办事处


    • 北京总部

    是德科技（中国）有限公司 北京市朝阳区望京北路3号

    电话：(010) 64397888

    传真：(010) 64390278

    邮编：100102


    • 上海分公司

    上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼

    电话：(021) 36127688

    传真：(021) 36127188

    邮编：200080


    • 广州分公司

    广州市天河北路233号中信广场66层07-08室

    电话：(020) 38113988

    传真：(020) 86695074

    邮编：510613


    • 深圳分公司

    深圳市福田中心区福华一路六号免税商务大厦3楼

    电话：(0755) 83079588

    传真：(0755) 82763181

    邮编：518048


    • 成都分公司

    成都高新区南部园区天府四街116号

    电话：(028) 83108888

    传真：(028) 85330830

    邮编：610041


    • 西安分公司

    西安市碑林区南关正街88号长安国际大厦D座5/F

    电话：(029) 88867770

    传真：(029) 88861330

    邮编：710068


    • 中国香港

    是德科技香港有限公司 中国香港北角电气道169号25楼

    电话：(852) 31977777

    传真：(852) 25069292 香港热线 800-938-693


    • 维修 / 校准服务中心

    中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189


    授权分销商


    • 上海信果电子科技有限公司（上海）

    上海市沪闵路8075号虹梅商务大厦6楼609室

    邮编：200233

    电话：021-64518399

    传真：021-54560890

    邮箱：jason.wu@signalgroup.com.tw

    官网：www.signalgroup.com.cn


    • 上海精测电子有限公司（上海）

    上海市北京东路668号西楼15E

    邮编：200001

    电话：13916371522

    传真：021-53086102

    邮箱：yangzhen@jingce.com

    官网：www.jingce.com


    • 北京东方中科集成科技股份有限公司（北京）

    北京市海淀区复兴路69号院12号楼2层、7层 邮政编码：100039

    邮编：100039

    电话：400-650-5566

    传真：010-68728001

    邮箱：zhangzp@oimec.com.cn

    官网：www.dfzk.com/br_keysight.html


    • 北京千聚科技发展有限公司（北京）

    北京市海淀区西三旗花园雪梨澳乡A区23-4号

    邮编：100085

    电话：010-82907162

    邮箱：zhuqihui@qianjukeji.com.cn

    官网：www.qianju.net.cn


    • 北京金龙翌阳科技发展有限公司（北京）

    北京市海淀区大柳树路17号富海大厦2001室

    邮编：100086

    电话：010-62167379/6213538

    邮箱：zhy@yy17.com

    官网：www.yy17.com


    • 厦门同昌源电子有限公司（厦门）

    厦门市湖里区悦华路215号综合楼二楼C单元

    邮编：361000

    电话：0592-5663715

    传真：0592-2236795

    邮箱：tcydz@xmtcy.com

    官网：www.xmjns.com


    • 合肥新普仪测科技有限公司（合肥）

    安徽省合肥市长江路53号长江大厦1102室

    邮编：230001

    电话：+86(0551)65177518 ext:

    传真：+86(0551)6260 7155

    邮箱：hfsimple@mail.hf.ah.cn

    官网：www.hfxp.com.cn


    • 品展国际贸易(上海)有限公司（上海）

    上海外高桥保税区泰谷路18号1号楼1105A室

    邮编：200003

    电话：+86(0512) 6808 6023

    传真：+86(0512) 6808 6025

    邮箱：melody@chtek.com.tw

    官网：chtek.com.tw


    • 广州康祺科技发展有限公司（广州）

    广州市天河区华强路1号珠控国际中心8层06单元

    邮编：510623

    电话：020-38295200

    传真：020-38295122

    邮箱：baobao@kontchi.com

    官网：www.kontchi.com


    • 广州科欣仪器有限公司（广州）

    广州市黄埔区黄埔大道933号209室

    邮编：510700

    电话：86-20-38699788

    传真：86-20-34395932

    邮箱：cs@gzkexin.com.cn

    官网：www.gzkexin.com.cn


    • 成都安诚迅飞电子科技有限公司（成都）

    成都市武侯区人民南路四段27号1栋1单元 24层3号

    邮编：610041

    电话：028-86027579

    邮箱：jincai.he@ancentest.com

    官网：www.ancentest.com


    • 新亚制程（浙江）股份有限公司（深圳）

    深圳市福田区中康路卓越城梅林中心广场（北区）一期1栋3楼

    邮编：518035

    电话：0755-23818536

    传真：0755-23818625

    邮箱：wangrongbin@sunyes.cn

    官网：www.sunyes.cn


    • 无锡市邦达测量科技有限公司（无锡）

    江苏省无锡市新区长江北路112号

    邮编：214028

    电话：0510-85258521 ext:

    邮箱：bdyiqi@bdyiqi.com

    官网：www.bdyiqi.com


    • 武汉力德仪测科技有限公司（武汉）

    武汉市光谷大道54号国际企业中心四期A座501室

    邮编：430074

    电话：027-85481090 ext:

    邮箱：liuyang@leader-e.com

    官网：www.leader-e.com


    • 苏州工业园区贝奇仪器有限公司（苏州）

    苏州工业园区通园路398号海逸大厦A402室

    邮编：215006

    电话：0512-62883832

    邮箱：szbeiqi@szbeiqi.net

    官网：www.szbeiqi.net


    • 青岛鲁芯仪器有限公司（青岛）

    青岛市福州北路135号鼎都1号写字楼328室

    邮编：266007

    电话：15953279543

    传真：0532-80669058-830

    邮箱：gaochangyuan@qdluxin.com

    官网：www.qdluxin.com


    • Avnet Electronics Marketing（Phoenix）

    2211 South 47th Street

    邮编：85034

    电话：+65 6289 9164

    邮箱：Josephine.Cheong@avnet.com

    官网：OnlineSupportAsia@Avnet.com


    • RFMW, Ltd.（San Jose）

    188 Martinvale Lane

    邮编：95119

    电话：#09-129

    邮箱：sales@rfmw.asia

    官网：www.rfmw.com


    • 沈阳实拓科技有限公司（沈阳）

    沈阳市和平区三好街35号8层

    邮编：110004

    电话：024-23843636

    传真：024-23905232

    邮箱：lf@shituokeji.cn

    官网：www.shituokeji.cn


    • 領先科儀有限公司（香港）

    新界荃灣海盛路3號TML廣場21樓B5室

    邮编：.

    电话：852-31523600

    传真：852-31523608

    邮箱：allenma@advanceinst.com

    官网：www.advanceinst.com


    租赁合作伙伴


    • 深圳君鉴科技股份有限公司（深圳市）

    光明街道观光路华强创意产业园3栋B座12楼光明新区

    邮编：518107

    电话：400-860-3035

    邮箱：shichang@chrent.com

    官网：www.chrent.com


    • 益莱储（北京）检测设备租赁有限公司（北京市）

    来广营高科技产业园区4号楼3层301朝阳区

    邮编：100102

    电话：400-819-2800

    邮箱：jim.chen@electrorent.com

    官网：www.electrorent.com/cn


    • 北京东方中科集成科技股份有限公司科技租赁事业部（北京市）

    北京市海淀区阜成路67号银都大厦12层

    邮编：100142

    电话：400-650-5566

    传真：010-68728001

    邮箱：wangml@oimec.com.cn

    官网：www.dfzk.com/rent


    • 客而禧设备租赁（上海）有限公司（Shanghai）

    徐汇区古美路1515号19号楼903室

    邮编：201102

    电话：021-54453166

    邮箱：krc@krcchina.com

    官网：www.krcchina.com


    • 深圳市瑞普高电子有限公司（深圳市）

    天安云谷产业园一期3栋D座1505-1506龙岗区

    邮编：518129

    电话：0755-29050100

    邮箱：rickluo@ruipugao.com

    官网：www.ruipugao.com


    • 苏州锦凡精密仪器科技有限公司（苏州）

    苏州市高新区滨河路625号创业大厦5幢505

    邮编：215011

    电话：18914031336

    邮箱：18914031336@jfsz.net


    解决方案合作伙伴


    • Tokyo Weld Co., Ltd.（Ota-ku）

    2-28-1 Kitamagome

    邮编：143-0021

    电话：81-3-3775-4331

    传真：81-3-3775-4359

    邮箱：d-imai@tokyoweld.com

    官网：www.tokyoweld.com


    • 上海恒榉电子科技有限公司（Shanghai）

    上海市奉贤区南桥镇西闸公路1036号3栋2层

    邮编：201401

    电话：18112779808

    邮箱：salesvalue@everise-hj.com

    官网：everise-hj.com


    • 佳燁科技股份有限公司(Ghiatek)（桃園市龜山區）

    光明街243巷2號

    邮编：33372

    电话：+886-3-350-9960

    传真：+886-3-320-3475

    邮箱：support@ghiatek.com

    官网：www.ghiatek.com.tw


    • 华美博科技（北京）有限公司（北京市）

    蓝靛厂东路2号金源时代商务中心C座9A2海淀区

    邮编：100097

    电话：010-88598732

    邮箱：sino@sino-microtech.com

    官网：www.sino-microtech.com


    • 和创联合科技（北京）有限公司（北京市）

    中关村东路18号财智国际大厦A座1612海淀区

    邮编：100083

    电话：400 650 7802

    邮箱：info@hisuntest.com

    官网：www.hisuntest.com


    • 昆山捷得立电子有限公司（昆山市）

    登云路288号海创大厦C座25楼

    邮编：215316

    电话：0512-36831748

    邮箱：sales@jiedeli-china.com

    官网：www.jiedeli-china.com


    • 深圳市捷泰普科技有限公司（深圳市）

    宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室

    邮编：518126

    电话：0755-83908488

    邮箱：sales@jtptech.cn

    官网：www.jtptech.cn


    • 深圳市易捷测试技术有限公司（深圳市）

    福虹路9号世贸广场C座1203室福田区

    邮编：518033

    电话：0755-83698930

    邮箱：dongni.zhang@gbit.net.cn

    官网：gbit.net.cn


    • 深圳市泰仕捷科技有限公司（深圳市）

    松岗大道7号汉海达大厦616室宝安区

    邮编：518105

    电话：0755-27128586

    邮箱：riky.gua@tesijet.com

    官网：www.tesijet.com


    • 深圳市蓉声科技有限公司（深圳市）

    福中路海连大厦连天阁 1103 室福田区

    邮编：518033

    电话：13828880571

    邮箱：jiang.qian@radiation-test.com

    官网：www.radiation-test.com


    • 苏州伊欧陆系统集成有限公司（苏州）

    星湖街218号生物纳米园A7楼305室苏州工业园区

    邮编：215000

    电话：4008808776

    邮箱：info@eoulu.com

    官网：www.eoulu.com


    • EM Labs Inc.（Kobe）

    1-4-13 Mizukasadori, Nagata

    邮编：653-0842

    电话：+81-50-5370-0262

    邮箱：info@emlabs.jp

    官网：www.emlabs.jp


    • MPI Corporation（Chupei）

    No. 155 Chungho Street

    邮编：302

    电话：+886-3-555-1771

    传真：+886-3-551-8381

    邮箱：info@mpi-corporation.com

    官网：www.mpi-corporation.com/ast


    • NOFFZ（Tönisvorst）

    Vorster Strasse 238

    邮编：47918

    电话：+49 2151-99878-0

    邮箱：info@noffz.com

    官网：www.noffz.com


    • Power Technology Solutions（Santa Clara）

    3048 Scott Blvd

    邮编：95054

    电话：650-308-8091 ext:

    传真：408-727-0827

    邮箱：inquiries@pwrts.com

    官网：www.pwrts.com


    • Resillion（Hasselt）

    Kempische Steenweg 303

    邮编：3500

    电话：+32 498 92 01 71

    邮箱：global-ci-sales@resillion.com

    官网：www.resillion.com


    • Suzhou Link Ways Tech Co., Ltd.（Suzhou）

    16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP

    邮编：215021

    电话：+86 512 6602 8998


    • 上海凌测电子科技有限公司（上海）

    峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区

    邮编：200127

    电话：021-61090608

    邮箱：yue.lin@merlintest.com.cn

    官网：www.merlintest.com.cn


    • 上海北汇信息科技有限公司（上海市）

    秀路100号虹桥总部1号4号楼3C闵行区紫

    邮编：201103

    电话：021-34716271

    邮箱：info@polelink.com

    官网：polelink.com


    • 上海怿星电子科技有限公司（上海市）

    钦州北路1199号智汇园87号楼5F室徐汇区

    邮编：200233

    电话：021-64955659

    邮箱：biz@e-planet.cn

    官网：www.e-planet.cn


    • 东昇电磁兼容技术(深圳)有限公司（深圳市）

    福田中心区26-3路中国凤凰大厦2栋25G

    邮编：518026

    电话：0755-82792411

    邮箱：sales@jstoyo.cn

    官网：www.jstoyo.cn


    • 南京派格测控科技有限公司（南京市）

    建邺区建邺人才服务大厦16楼

    邮编：210019

    电话：4008920858

    邮箱：sales@pgtec.cn

    官网：pgtec.cn


    • 南京纳特通信电子有限公司（南京市）

    江宁开发区临淮街20号

    邮编：210012

    电话：025-84471796

    邮箱：sales@rflight.cn

    官网：www.rflight.cn


    • 深圳市研辰科技有限公司（深圳市）

    益田路3008号皇都广场C座2815室福田区

    邮编：518048

    电话：0755-82828703

    邮箱：roger_huang@ascentest.com

    官网：www.ascentest.com


    原厂翻新与二手仪器


    • 是德科技原厂二手仪器商城（Keysight Certified Pre-Owned）：www.keysight.com/used/cn/zh/


    • 原厂翻新仪器经与新品相同的最终测试与校准，原厂保修最长 5 年；享 40%–90% 折扣，另有线上 5% / 教育 15% 优惠


     

    0条提问

    X

    提问

    X

    回答

    暂无视频

     

    0条口碑
    X

    发表口碑

    口碑标题
    上传图片

    ONETEST仪器资源库

    合作与收录

    联系电话：+86-755-23033660

    电子邮箱：info@onetest.cn

    Onetest仪器资源库

    公众号

    Onetest仪器资源库

    视频号

    Onetest仪器资源库

    bilibili

    Onetest仪器资源库

    小助手

    © 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

    AI问答