是德科技 | KEYSIGHT
S9106A 15GHz 收发信机 1.2GHz 详细指标
Wideband RF transceiver testing
条件：transceivers, subject to additional nominal insertion loss of 1 to 1.5 dB due to the switches and internal
cabling and connectors between the M9410A modules and the system’s front panel.
The RF performance of the S9106A systems is based on the performance of the M9410A VXT
The performance characteristics of the M9410A VXT modules are described in the product data sheet
Performance characteristics for the E7770A CIU are provided in the product data sheet which can be
条件：due to environmental conditions. All specifications and characteristics apply over an ambient
temperature range of 22 to 28 °C (unless otherwise stated).
Nominal (nom) Describes the expected mean or average performance, or an attribute whose performance is
by design, such as the 50 Ω connector. This data is measured at room temperature
(approximately 25 °C). Nominal performance is not warranted.
expected performance, such as amplitude drift vs. time. This data is measured at room
temperature (approximately 25 °C). Measured performance is not warranted.
Specification Warranted performance. Specifications include guard bands to account for the expected
statistical performance distribution, measurement uncertainties, and changes in performance
Typical (typ) Describes additional product performance information that is not covered by the product
warranty. It is performance beyond specifications that 95% of the units exhibit with a
95%
confidence level at room temperature (approximately
25 °C). Typical performance does not
include measurement uncertainty. Typical performance is not warranted.
Measured (meas) Describes an attribute measured during the design phase for purposes of communicating
Recommended best practices
• Set chassis fan to high at environmental temperatures above
45 °C.
适用型号 S9106A Configurations
This data sheet contains system performance for the S9106A base systems that are available in three
条件：Each M9410A also includes option MMO to support timing synchronization for MIMO measurements.
synchronization between the channels. Phase coherency between the channels is not supported.
The S9106A systems includes a PXI chassis subsystem containing two or four M9410A VXT PXIe RF Vector
Transceivers to provide two or four channels of vector signal generation and signal analysis. Each M9410A
transceiver module is configured with a frequency range of 380 MHz to 6 GHz
1.2 GHz IF bandwidth, option
1EA for high output power up to +20 dBm CW, and option HDX to provide a half-duplex port.
The four M9410A transceiver channels can be used independently, or they can be configured for 2x2 or
4x4 MIMO
4x4 MIMO only supported in S9106A-4UP and S9106A-42D, measurements with timing
Configuration
1: S9106A-2IF
5G FR1 Multi-Band Vector
• Two Transceiver channels
380 MHz to 6
• 7-15 GHz High IF on both
Configuration
3: S9106A-42D
5G FR1 Multi-Band Vector
• Four Transceiver channels
380 MHz to 6
• 7-15 GHz High IF on two
Configuration
2: S9106A-4UP
5G FR1 Multi-Band Vector
• Four Transceiver channels
380 MHz to 6 GHz, with
条件：M9155C Dual SPDT switch modules are integrated in S9106A-2IF and S9106A-42D only.
device under test (DUT) to the system are not included and must be supplied by the Customer.
Additional common components in the base subsystem include an M9019A 18-slot PXIe chassis (Gen
3)
an M9038A embedded controller, and an M9300A PXIe Frequency Reference module, as well as a
custom front panel with rugged type-N test ports that is used for connecting to the device under test. Two
The S9106A-2IF and S9106A-42D systems also includes an E7770A Common Interface Unit (CIU) which
provides up conversion and down conversion to enable measurements of the device under test (DUT) over
the range of center frequencies from 7.7 to 14.3 GHz, with 1.2 GHz IF bandwidth. This is referred to as the
DUT IF test capability. One LO module, one LO distribution module, and two channel cards are included to
provide two DUT IF measurement channels, and the channels can be used independently or configured for
2x2 MIMO measurements with timing synchronization between the channels, but no phase coherency.
RF cables needed for connections between the PXI subsystem and the E7770A CIU are included in the
solution. Additional cables, adapters, attenuators, or other components required for connecting the
The following connectors will be available on the system front panel for each of the sub-6 GHz transceiver
条件：• RF In: Signal analyzer input, +27 dBm/30 VDC maximum input level, nominal (type-N female)
• RF Out: Signal generator output, +20 dBm maximum output level, nominal (type-N female)
• HD Port: Half-duplex port, +27 dBm/30 VDC maximum input level
+5 dBm CW maximum output
• Trig 1 and Trig
2: trigger ports (BNC female)
The following connectors will be available on the system front panel for each of the two DUT IF
7-15 GHz
The following connectors will be available on the system front panel, with the signals shared by the entire
• 10 MHz Reference Input
• 10 MHz Reference Output
• PXI Backplane Triggers: Trig 1 and Trig
2
380 to 6000 MHz
S9106A-2IF and S9106A-42D
380 to 6000 MHz
7.7 to 14.3 GHz
S9106A-2IF and S9106A-42D 7.7 to 14.3 GHz
1200 MHz
S9106A-4UP 380 to 6000 MHz
-150 dBm to +27 dBm
S9106A-2IF and S9106A-42D 380 to 6000 MHz
-150 dBm to +27 dBm
7.7 to 14.3 GHz
-70 dBm to +10 dBm
Half Duplex Ports 380 to 6000 MHz
-150 dBm to +27 dBm
Frequency range Level Accuracy 380 to 1310 MHz - 50 dBm to +10 dBm ≤ ± 0.80 dB (≤ ± 0.45 dB) 1310 to 2000 MHz - 50 dBm to +10 dBm ≤ ± 0.75 dB (≤ ± 0.40 dB) 2000 to 4500 MHz - 50 dBm to +10 dBm ≤ ± 0.85 dB (≤
± 0.40 dB)
4500 to 5400 MHz - 50 dBm to -40 dBm ≤ ± 0.85 dB (≤
± 0.50 dB)
- 40 dBm to +10 dBm ≤ ± 0.85 dB (≤
± 0.45 dB)
5400 to 6000 MHz - 50 dBm to -40 dBm ≤ ± 1.00 dB (≤
± 0.60 dB)
- 40 dBm to +10 dBm ≤ ± 0.90 dB (≤
± 0.50 dB)
适用型号 S9106A-2IF 和 S9106A-42D
7.0 to 7.7 GHz - 50 dBm to +10 dBm ≤ ± 2.30 dB (≤
± 1.70 dB)
7.7 to 14.3 GHz - 50 dBm to +10 dBm ≤ ± 2.10 dB (≤
± 1.40 dB)
14.3 to 15 GHz - 50 dBm to +10 dBm ≤ ± 1.80 dB (≤
± 1.20 dB)
Half Duplex Ports 380 to 6000 MHz - 50 dBm to +10 dBm ≤ ± 0.95 dB (≤
± 0.55 dB)
适用型号 S9106A-2IF 和 S9106A-42D
RF and Half Duplex Ports 380 to 6000 MHz 100 MHz ± 0.67 dB 200 MHz
± 0.36 dB
S9106A-2IF and S9106A-42D 7.7 to 14.3 GHz 1200 MHz
± 1.50 dB
Test signal for FR1: 5G NR, 30 kHz subcarrier spacing
256QAM
All S9106A Configurations
Signal Bandwidth Frequency EVM (typical) 100 MHz 480 MHz ≤ –46 dB
–20 to -15 dBm input power
≤ –48 dB
–15 to 0 dBm input power
1100 MHz ≤ –46 dB
–20 to -15 dBm input power
≤ –50 dB
–15 to 0 dBm input power
1500 MHz ≤ –49 dB
–20 to -15 dBm input power
≤ –52 dB
–15 to 0 dBm input power
2000 MHz ≤ –48 dB
–20 to -15 dBm input power
≤ –52 dB
–15 to 0 dBm input power
3000 MHz ≤ –51 dB
–20 to 0 dBm input power
4000 MHz ≤ –50 dB
–20 to 0 dBm input power
5000 MHz ≤ –48 dB
–20 to -10 dBm input power
≤ –49 dB
–10 to 0 dBm input power
400 MHz
2000, 3000, 4000 MHz ≤ –44 dB
–20 to -15 dBm input power
≤ –46 dB
–15 to 0 dBm input power
5000 MHz ≤ –45 dB
–20 to 0 dBm input power
5600 MHz ≤ –43 dB
–20 to -15 dBm input power
≤ –45 dB
–15 to 0 dBm input power
适用型号 S9106A-2IF 和 S9106A-42D
100 MHz
7.7 to 14.3 GHz
≤ –35 dB
–40 to -30 dBm input power
≤ –39 dB
–30 to 0 dBm input power
400 MHz
≤ –30 dB
–40 to -32 dBm input power
≤ –35 dB
–32 to -22 dBm input power
≤ –38 dB
–22 to 0 dBm input power
All S9106A Standard Configurations
Signal Bandwidth Frequency EVM (typical) 100 MHz 380 – 1500 MHz ≤ –46 dB
–20 to -10 dBm input power
≤ –48 dB
–10 to 0 dBm input power
1500 – 2000 MHz ≤ –50 dB
–20 to -15 dBm input power
≤ –52 dB
–15 to 0 dBm input power
2000 – 3000 MHz ≤ –48 dB
–20 to -10 dBm input power
≤ –52 dB
–10 to -5 dBm input power
3000 – 5000 MHz ≤
–50 dB, – 20 to 0 dBm input power
5000 – 6000 MHz ≤
–49 dB, – 20 to -15 dBm input power
≤ –49 dB, – 15 to 0 dBm input power
400 MHz
2000 – 4000 MHz ≤
–44 dB, – 20 to 0 dBm input power
4000 – 5600 MHz ≤
–39 dB, – 20 to -15 dBm input power
≤ –45 dB, – 15 to 0 dBm input power
5600 – 6000 MHz ≤
–35 dB, – 20 to -15 dBm input power
≤ –43 dB, – 15 to 0 dBm input power
Adjacent channel leakage ration (ACLR)
Test signal for FR1: 5G NR, 30 kHz subcarrier spacing
256 QAM
All S9106A Configurations
Signal Bandwidth Frequency range ACLR (typical) 100 MHz 380 - 4000 MHz -53 dBc, -20 to 0 dBm input power 4000 - 6000 MHz -52 dBc, -20 to 0 dBm input power 400 MHz 2000 - 5000 MHz -48 dBc
-20 to 0 dBm input power
5000 - 6000 MHz -46 dBc
-20 to 0 dBm input power
适用型号 S9106A-2IF 和 S9106A-42D
-36 dBc
-40 to -35 dBm input power
-42 dBc
-35 to -30 dBm input power
-45 dBc
-30 to 0 dBm input power
-30 dBc
-40 to -35 dBm input power
-35 dBc
-35 to -30 dBm input power
-39 dBc
-30 to -26 dBm input power
-42 dBc
-26 to 0 dBm input power
All S9106A Configurations HD ports
100 MHz 380 – 5000 MHz -53 dBc
-20 to 0 dBm input power
5000 – 6000 MHz -52 dBc
-20 to 0 dBm input power
400 MHz
2000 – 5000 MHz -48 dBc
-20 to -10 dBm input power
5000 – 5600 MHz -46 dBc
-20 to 0 dBm input power
5600 – 6000 MHz -48 dBc
-20 to 0 dBm input power
S9106A-4UP
380 to 6000 MHz
S9106A-2IF and S9106A-42D
380 to 6000 MHz
7.7 to 14.3 GHz
S9106A-2IF and S9106A-42D 7.7 to 14.3 GHz
1200 MHz
S9106A-4UP 380 to 6000 MHz CW
-120 dBm to +20 dBm
适用型号 S9106A-2IF 和 S9106A-42D
380 to 6000 MHz CW
-120 dBm to +20 dBm
Modulated: Depends on Crest Factor 7.7 to 14.3 GHz CW
-50 dBm to +10 dBm
Modulated: Depends on Crest Factor
S9106A Half Duplex Ports 380 to 6000 MHz CW
-120 dBm to +5 dBm
Frequency range Level Accuracy 380 to 550 MHz -50 dBm to 0 dBm ≤ ± 0.70 dB (≤ ± 0.30 dB) 550 to 2000 MHz -50 dBm to 0 dBm ≤ ± 0.70 dB (≤ ± 0.35 dB) 2000 to 3900 MHz -50 dBm to 0 dBm ≤ ± 0.80 dB (≤
± 0.40 dB)
3900 to 5100 MHz -50 dBm to 0 dBm ≤ ± 1.10 dB (≤
± 0.65 dB)
5100 to 5600 MHz -50 dBm to 0 dBm ≤ ± 1.55 dB (≤
± 1.00 dB)
5600 to 5700 MHz -50 dBm to 0 dBm ≤ ± 1.10 dB (≤
± 0.60 dB)
5700 to 6000 MHz -50 dBm to 0 dBm ≤ ± 1.10 dB (≤
± 0.65 dB)
S9106A-2IF and S9106A-42D 7.0 to 7.7 GHz - 50 dBm to +5 dBm ≤ ± 2.70 dB (≤
± 1.95 dB)
7.7 to 14.3 GHz - 50 dBm to +5 dBm ≤ ± 2.00 dB (≤
± 1.40 dB)
14.3 to 15 GHz - 50 dBm to +5 dBm ≤ ± 2.10 dB (≤
± 1.50 dB)
Frequency range Level Accuracy 380 to 3000 MHz -50 dBm to 0 dBm ≤ ± 0.80 dB (≤ ± 0.45 dB) 3000 to 6000 MHz -50 dBm to 0 dBm ≤ ± 1.15 dB (≤
± 0.75 dB)
适用型号 S9106A-4UP, S9106A-2IF 和
S9106A-42D
380 to 6000 MHz
S9106A-2IF and S9106A-42D 7.7 to 14.3 GHz 1200 MHz
± 1.5 dB
Half Duplex Ports
380 to 6000 MHz
Test signal for FR1: 5G NR, 30 kHz subcarrier spacing
256 QAM
Signal Bandwidth Frequency range EVM (typical) 100 MHz 480 - 1100 MHz ≤ –48 dB
–20 to –10 dBm output power
≤ –50 dB
–10 to 0 dBm output power
1500, 2000, 3000 MHz ≤ –49 dB
–20 to –10 dBm output power
≤ –52 dB
–10 to 0 dBm output power
4000 MHz ≤ –50 dB
–20 to –10 dBm output power
≤ –51 dB
–10 to 0 dBm output power
5000, 5600 MHz ≤ –48 dB
–20 to 0 dBm output power
400 MHz
2000 MHz
≤ –45 dB
–20 to -12 dBm output power
≤ –47 dB
–12 to -8 dBm output power
≤ –48 dB
–8 to 0 dBm output power
3000 MHz ≤ –47 dB
–20 to -5 dBm output power
≤ –49 dB
–5 to 0 dBm output power
4000 MHz ≤ –47 dB
–20 to 0 dBm output power
5000 MHz ≤ –44 dB
–20 to -5 dBm output power
≤ –45 dB
–5 to 0 dBm output power
5600 ≤ –45 dB
–20 to -15 dBm output power
≤ –46 dB
–15 to 0 dBm output power
3000 MHz ≤ –43 dB
–20 to -5 dBm output power
≤ –45 dB
–5 to 0 dBm output power
4000 MHz
≤ –40 dB
–20 to -15 dBm output power
≤ –42 dB
–15 to -10 dBm output power
≤ –44 dB
–10 to 0 dBm output power
5000 MHz ≤ –42 dB
–20 to -5 dBm output power
≤ –43 dB
–5 to 0 dBm output power
5600 MHz
≤ –42 dB
–20 to -15 dBm output power
≤ –43 dB
–15 to -8 dBm output power
≤ –42 dB
–8 to 0 dBm output power
适用型号 S9106A-2IF 和 S9106A-42D
≤ –42 dB
–20 to -15 dBm output power
≤ –44 dB
–15 to -10 dBm output power
≤ –42 dB
–10 to -5 dBm output power
≤ –35 dB
–5 to 0 dBm output power
≤ –37 dB
–20 to -15 dBm output power
≤ –40 dB
–15 to -10 dBm output power
≤ –39 dB
–10 to -5 dBm output power
≤ –33 dB
–5 to 0 dBm output power
8 x 100 MHz
7.7 to 14.3 GHz
≤ –34 dB
–20 to -3 dBm output power
≤ –32 dB
–3 to 0 dBm output power
Half Duplex Ports 100 MHz
380 – 1500 MHz
≤ –47 dB
–20 to -10 dBm output power
≤ –51 dB
–10 to 0 dBm output power
≤ –51 dB
–10 to 0 dBm output power
1500 – 4000 MHz
≤ –49 dB
–20 to -10 dBm output power
≤ –51 dB
–10 to 0 dBm output power
4000 – 5000 MHz
≤ –49 dB
–20 to -10 dBm output power
≤ –52 dB
–10 to -5 dBm output power
≤ –48 dB, – 5 to 0 dBm output power
5000 – 6000 MHz ≤
–49 dB, – 20 to 0 dBm output power
400 MHz
380 – 1500 MHz ≤ –45 dB
–20 to -10 dBm output power
≤ –48 dB
–10 to 0 dBm output power
2000 – 3000 MHz ≤ –47 dB
–20 to -10 dBm output power
≤ –48 dB
–10 to 0 dBm output power
3000 – 4000 MHz ≤ –47 dB
–20 to -10 dBm output power
≤ –48 dB
–10 to 0 dBm output power
4000 – 5000 MHz ≤
–46 dB, – 20 to -10 dBm output power
≤ –47 dB, – 10 to 0 dBm output power
5000 – 6000 MHz ≤
–44 dB, – 20 to 0 dBm output power
Adjacent channel leakage ration (ACLR)
Test signal for FR1: 5G NR, 30 kHz subcarrier spacing
256 QAM
Signal Bandwidth Frequency range ACLR (typical) 100 MHz 380 – 1000 MHz ≤ –52 dBc
–20 to -10 dBm output power
≤ –53 dBc
–10 to 0 dBm output power
1000 – 4500 MHz ≤ –56 dBc
–20 to 0 dBm output power
4500 – 5200 MHz ≤ –53 dBc
–20 to 0 dBm output power
5200 – 6000 MHz ≤ –49 dBc
–20 to 0 dBm output power
400 MHz
2000 MHz ≤ –50 dBc
–20 to 0 dBm output power
3000 MHz ≤ –48 dBc
–20 to 0 dBm output power
4000 MHz ≤ –46 dBc
–20 to 0 dBm output power
5000 MHz ≤ –47 dBc
–20 to 0 dBm output power
5600 MHz ≤ –44 dBc
–20 to 0 dBm output power
3000 MHz ≤ –45 dBc
–20 to 0 dBm output power
4000 MHz ≤ –43 dBc
–20 to 0 dBm output power
5000 MHz ≤ –44 dBc
–20 to 0 dBm output power
5600 MHz ≤ –41 dBc
–20 to 0 dBm output power
适用型号 S9106A-2IF 和 S9106A-42D
100 MHz
380 – 1000 MHz ≤ –52 dBc
–20 to -10 dBm output power
≤ –53 dBc
–10 to 0 dBm output power
1000 – 4500 MHz ≤ –57 dBc
–20 to 0 dBm output power
4500 – 5200 MHz ≤ –53 dBc
–20 to 0 dBm output power
5200 – 6000 MHz ≤ –49 dBc
–20 to 0 dBm output power
7.7 to 14.3 GHz
≤ –49 dBc
–20 to -15 dBm output power
≤ –51 dBc
–15 to -10 dBm output power
≤ –49 dBc
–10 to -5 dBm output power
≤ –40 dBc
–5 to 0 dBm output power
400 MHz
2000 MHz ≤ –50 dBc
–20 to 0 dBm output power
3000 MHz ≤ –48 dBc
–20 to 0 dBm output power
4000 MHz ≤ –46 dBc
–20 to 0 dBm output power
5000 MHz ≤ –47 dBc
–20 to 0 dBm output power
5600 MHz ≤ –44 dBc
–20 to 0 dBm output power
7.7 to 14.3 GHz
≤ –43 dBc
–20 to -15 dBm output power
≤ –46 dBc
–15 to -10 dBm output power
≤ –47 dBc
–10 to -5 dBm output power
≤ –40 dBc
–5 to 0 dBm output power
3000 MHz ≤ –45 dBc
–20 to 0 dBm output power
4000 MHz ≤ –43 dBc
–20 to 0 dBm output power
5000 MHz ≤ –44 dBc
–20 to 0 dBm output power
5600 MHz ≤ –41 dBc
–20 to 0 dBm output power
Signal Bandwidth Frequency range ACLR (typical) 100 MHz 380 MHz – 1.1 GHz ≤ –51 dBc
–20 to -10 dBm output power
≤ –53 dBc
–10 to 0 dBm output power
1.1 GHz – 4.0 GHz ≤ –55 dBc
–20 to 0 dBm output power
4.0 GHz – 6 GHz ≤ –52 dBc
–20 to 0 dBm output power
400 MHz
2.0 GHz – 3.0 GHz ≤ –50 dBc
–20 to 0 dBm output power
3.0 GHz – 4.0 GHz ≤ –48 dBc
–20 to 0 dBm output power
4.0 GHz – 5.6 GHz ≤ –46 dBc
–20 to 0 dBm output power
5.6 GHz – 6 GHz ≤ –44 dBc
–20 to 0 dBm output power
S9106A
5G Multi-Port Vector Transceiver
Altitude up to 6,561.68 ft (2,000 m)
Operating temperature 10 to 40° C maximum relative humidity (non-condensing)
85% RH
S9106A Base System (PXIe chassis with
modules, rugged panel, and cables) 100/120 V, 50/60 Hz 220/240 V, 50/60 Hz
1200 W Max (lower range)
1300 W Max (upper range)
480W maximum
Height
197.8 mm (7.79 in); with feet installed
Width
449.5 mm (17.70 in); with rugged panel
Depth 568.9 mm (22.40 in); with rugged panel (from back bumper to front BNC)
S9106A Rack Space 2 X 2U x
1 rack width
Height
145.6 mm (5.7 in); with feet installed
Width
449 mm (17.7 in); across handles
Depth
424 mm (16.7 in); across front connectors and rear feet
S9106A-4UP
20.4 kg (45.0 lbs)
S9106A-2IF (Base System)
22.6 kg (49.8 lbs)
S9106A-42D (Base System)
24.0 kg (53.0 lbs)
Interface LAN RJ-45
条件：The recommended calibration cycle is one year; calibration services are available through Keysight service centers.
LAN, Display Port, and USB Connectors, M9038A
Note: M9038A Embedded controllers are in all S9106A units
LAN
1 and LAN2 (TCP/IP interface)
Connectors (Ethernet) One 10/100/1000BASE-T (RJ45), One
100/1000/10GBASE-T (RJ45)
Connectors (Video) One DisplayPort++, Two Thunderbolt-3 (TB1 & TB2)
Connectors (USB) Four, USB
2.0(Type A)
Connectors (USB) Two, USB
3.0 (Type A)
Two Thunderbolt 3.0 ports (USB-C with PD
3.0)
TB1 Port: Max. 37.5W, supports USB PD 5V @ 3A, 9V @ 3A, 12V @ 3A, 15V @
2.5A, and daisy-
chain capability TB2 Port: Max. 15W, supports USB PD 5V @
3A and daisy-chain capability
TB2 Port: Max. 15W, supports USB PD 5V @
3A and daisy-chain capability
条件：Accuracy ± 16 Hz, typical, within 1 year since last calibration, from 20 to 30°C.
Refer to the Keysight M9300A PXIe Frequency Reference Data Sheet for details on accuracy, aging rate, and stability.
Connector GPIB (Micro-D
25-pin)
S9106A Base System Front Panel
Frequency reference
100 MHz Ref Out and 10 MHz Ref In/Out connectors above the rugged front panel
100 MHz Ref Out, frequency reference (if available)
Recommended Calibration Cycle
1 year
条件：Accuracy ± 1.6 Hz, typical, within 1 year since last calibration, from 20 to 30°C.
Refer to the Keysight M9300A PXIe Frequency Reference Data Sheet for details on accuracy, aging rate, and stability.
Amplitude
9.5 dBm (nominal)
10 MHz Ref Out, Frequency Reference
Recommended Calibration Cycle
1 year
条件：Connects behind rugged panel to M9300A PXIe Reference Ref In and locks to another reference with a value from 1 to 110 MHz.
Amplitude
9.5 dBm (nominal)
10 MHz Ref In
条件：Input amplitude 0 to 10 dBm (nominal)
connectors, see the Keysight PXIe Chassis Family, User Guide (M9019-90003).
Frequency
1 MHz to 110 MHz, sine wave
Lock range
± 1 ppm (nominal)
Trig 1 and Trig
2 Connectors above the rugged front panel
Connects behind rugged panel to M9019A PXIe Chassis Trig 1 and Trig 2. These two front panel trigger connectors (Trig 1 and Trig
2) above the rugged
front panel connect to the PXI [0:7] backplane trigger bus in the M9019A chassis and can be configured as Input or Output. To learn more about these
Direction control Input or output (configurable)
Output level 3.3 V CMOS (TTL compatible
5 V tolerant)
Output impedance
50 Ω (typical)
Output trigger source PXI_Trig0 - PXI_Trig7 (Segment
2 or 3)
Input level 3.3 V CMOS (TTL compatible
5 V tolerant)
Input impedance
3 kΩ (typical)
Input trigger destination PXI_Trig0 - PXI_Trig7 (Segment
2 or 3)
Input threshold
1.65 V (typical)
Minimum swing
250 mV (typical)
Minimum pulse width
100 ns (typical)
Transceiver Connectors, RF
380 MHz to 6 GHz on the rugged front panel
条件：Connector Type-N (f), 50 Ω (nominal)
Frequency range
380 MHz to 6 GHz
Amplitude 30 VDC
+27 dBm maximum safe input power
条件：Connector Type-N (f), 50 Ω (nominal)
Connector Type-N (f), 50 Ω (nominal)
Frequency range
380 MHz to 6 GHz
Amplitude 30 VDC
+27 dBm maximum applied reverse input power
Half Duplex, Option HD1, HD2
Frequency range
380 MHz to 6 GHz
Amplitude 30 VDC
+27 dBm maximum safe input power
条件：Input impedance 1 kΩ or 50 Ω nominal
Local oscillator card (LO card), connectors 10 MHz In BNC (f), 50 Ω, nominal
LO Aux Out SMA (f), 50 Ω, nominal
Ref Out and CLK In LO Ou 50 Ω, nominal (Intended for future use.)
Input level Range
0 to +3.3v
Output impedance
50 Ω nominal
Output Level
+3.3V LVTTL, LVDS
E7770A Common Interface Unit (CIU) Front Panel
and Rear Panel (S9106A-2IF and S9106A-42D configurations Only)
LO Out SMA (f)
50 Ω, nominal
LO distribution card, connectors
条件：LO In, LO In 2, BNC (f), 50 Ω, nominal
LO Out 1,2,3,4 BNC (f), 50 Ω, nominal
LO AUX 1,2,3,4 BNC (f), 50 Ω, nominal
条件：IF Out A N Type (f), 50 Ω, nominal
IF Out B N Type (f), 50 Ω, nominal
IF In A N Type (f), 50 Ω, nominal
IF IN B N Type (f), 50 Ω, nominal
LO In SMA (f)
50 Ω, nominal
条件：Channel A, DUT IF In N Type (f), 50 Ω, nominal
Channel B, DUT IF Out N Type (f), 50 Ω, nominal
LO/CTRL/PWR TNC (f), 50 Ω, nominal, +36 VDC, 1A
Keysight enables innovators to push the boundaries of engineering by quickly solving
design, emulation, and test challenges to create the best product experiences. Start your
This information is subject to change without notice. © Keysight Technologies, 20
24
Published in USA, April 23 , 202 4, 312 4-131
7.EN
条件：For more detailed product and specification information refer to the following literature and web pages:
• Keysight S9106A Start Up Guide
• Keysight M9019A PXIe 18 slot Chassis, Data Sheet (literature no.
5992-1481EN)
• Keysight M9038A PXIe High Performance Embedded Controller, Data Sheet (literature no.
3122-1717.EN)
• Keysight M9410A and M9411A PXIe VXT Vector Transceivers, Data Sheet (literature no.
5992-3331EN)
• Keysight X-Series Measurement Applications, Brochure (literature no.
5989-8019EN)
• Keysight Signal Studio Software, Brochure (literature no.
5989-6448EN)
以上指标摘自厂家官方数据手册，完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
客服
粤公网安备44030902003758