ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
⚫工作频率：26.5GHz~40GHz⚫增益：≥40dB⚫输出CW饱和功率：≥10W⚫带内增益平坦度：≤±3dB⚫输入驻波：≤2⚫谐波抑制：≥20dBc⚫输入接口:波导⚫输出接口:波导⚫供电：220VAC⚫工作温度：-10℃ ～+40℃
宽带宽：100 kHz 至 20GHz反极性保护过压/欠压保护+28dBm（典型值） 输出功率 @ P1dB紧凑且易于使用，带有专用电源
用固态设计方案频率覆盖4K-40GHz功率等级高达10000W满足现有EMC标准中绝大多数应用场合双定向耦合器+高精度功率计实时监测并显示输出端的正反向功率及输出驻波
同厂商产品
AP-0.6B5(A) 是松田精密（Matsusada Precision）AP 系列的一款放大器，最大输出电压 0.6V，最大输出电流 5mA。 AP/AS series is a fast response high voltage amplifier module through Matsusada’s extensive experiences and know-how in high voltage power supply technologies.
AP-0.3B10(A) 是松田精密（Matsusada Precision）AP 系列的一款放大器，最大输出电压 0.3V，最大输出电流 10mA。 AP/AS series is a fast response high voltage amplifier module through Matsusada’s extensive experiences and know-how in high voltage power supply technologies.
AMS-5B6 是松田精密（Matsusada Precision）AMS 系列的一款放大器，最大输出电压 5kV，最大输出电流 6mA，最大输出功率 30W。 The AMS/AMT series consists of rack-mountable, high-speed high-voltage operational amplifiers.
- «
- 1
- »
AMS-10B2 10kV/2mA功率放大器 20W|松田精密 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
AMS-10B2 放大器
ULTRA HIGH SPEED 高压 AMPLIFIER 10kV / 2mA / 20W
产品简介
AMS-10B2 是松田精密（Matsusada Precision）AMS 系列的一款放大器，最大输出电压 10kV，最大输出电流 2mA，最大输出功率 20W。
The AMS/AMT series consists of rack-mountable, high-speed high-voltage operational amplifiers. Engineered for precision and reliability, these amplifiers provide fast response speeds of up to 100 kHz, capable of outputting high-voltage sine, triangle, sawtooth, and square waves proportional to the input waveform.
We have eight models with output voltage ranging from ±0.6 kV to ±10 kV, which are all solid-state.
IMPORTANT: For applications involving capacitive loads or electrical discharge, please refer to " For capacitive loads and discharge loads "
核心参数
• Output / Voltage [kVdc]：-10 to +10 kV
• Current [max]：±2 mA
• Power [max]：20 W
• Slew rate：30 V/µs
• Frequency response (-3dB) *1 / Full scale：DC to 1 kHz
• 10% of full scale：DC to 2 kHz
• 输入电压：115 Vac ±10% (103.5 to 126.5 Vac), 50/60 Hz, Single-phase
230 Vac ±10% (207 to 253 Vac), 50/60 Hz, Single-phase (option)
100 to 240 Vac, 50/60 Hz, Single-phase (option)
• 输出电压控制：External control voltage -10 to +10 V (DC or peak AC)
• -LC：Current Limit
Limits the output current at the time of overload
• -LN：Output state auto-recovery
(former: no power failure protection)
• -L1：Output current monitor
-10 V to +10 V from BNC connector on front panel
(output impedance 1 kΩ up to 2 kHz bandwidth)
• -L(230V)：Input Voltage 230 Vac ±10% single-phase
(unavailable with -CE option selected)
资源下载
以上内容与指标均取自Matsusada Precision 官网产品页与官方数据手册，未标注口径的为厂家公布值。
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
AMS-10B2 放大器 详细指标
ULTRA HIGH SPEED 高压 AMPLIFIER 10kV / 2mA / 20W
详细指标
以下指标取自松田精密（Matsusada Precision）官网 AMS 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• Output / Voltage [kVdc]：-10 to +10 kV
• Current [max]：±2 mA
• Power [max]：20 W
• Slew rate：30 V/µs
• Frequency response (-3dB) *1 / Full scale：DC to 1 kHz
• 10% of full scale：DC to 2 kHz
系列共用规格
• 输入电压：115 Vac ±10% (103.5 to 126.5 Vac), 50/60 Hz, Single-phase
230 Vac ±10% (207 to 253 Vac), 50/60 Hz, Single-phase (option)
100 to 240 Vac, 50/60 Hz, Single-phase (option)
• 输出电压控制：External control voltage -10 to +10 V (DC or peak AC)
• -LC：Current Limit
Limits the output current at the time of overload
• -LN：Output state auto-recovery
(former: no power failure protection)
• -L1：Output current monitor
-10 V to +10 V from BNC connector on front panel
(output impedance 1 kΩ up to 2 kHz bandwidth)
• -L(230V)：Input Voltage 230 Vac ±10% single-phase
(unavailable with -CE option selected)
• -L(5m)：High Voltage output cable 5 meters length
Note that phenomena such as through rate or response speed reduced, or output waveform distorted may happen.
• -CE：Conform to CE marking with input voltage 100 Vac to 240 Vac
(For available models, see "Models" CE marking)
Conforms to CE marking safety standards with the input voltage 100 Vac to 240 Vac ±10%, 50 Hz/60 Hz, single-phase.
* The product is designed to be installed in the customer's system so as to meet the requirements of CE marking regarding chassis mounting,noise control,proper protections,and isolated devices. It is not designed to perform alone.
•交流输入电缆：Standard
CABLE TYPE1
Rated voltage: 125 V
Maximum current: 10 A
(For Japan or North America)
2.5 meters
Standard
with -L(230V) option
CABLE TYPE3
Rated voltage: 250 V
Maximum current: 10 A
(For Europe)
2.5 meters
Sold separately
with -L(230V) option
CABLE TYPE4
Rated voltage: 250 V
Maximum current: 10 A
(For Europe)
2.5 meters
Select the appropriate AC input cable for your operating environment and region. For cable types not listed below, customers must provide their own compatible cables.
• 高压 output cable：Standard
CN-40-AHVP
1.5 meters length
Standard with -L(5m) option
CN-40-AHVP(5)
5 meters length
*Standard cable length is 1.5 meters. For 5 meter length,suffix(5) to the model number.
Example CN-120AR-MHVP(5)
For more details,refer to the CN series.
选件 / 附件
• -LC：Current Limit
Limits the output current at the time of overload
•-LN：Output state auto-recovery
(former: no power failure protection)
• -L1：Output current monitor
-10 V to +10 V from BNC connector on front panel
(output impedance 1 kΩup to 2 kHz bandwidth)
•-L(230V)：Input Voltage 230 Vac ±10% single-phase
(unavailable with -CE option selected)
• -L(5m)：High Voltage output cable 5 meters length
Note that phenomena such as through rate or response speed reduced,or output waveform distorted may happen.
•-CE：Conform to CE marking with input voltage 100 Vac to 240 Vac
(For available models, see "Models" CE marking)
Conforms to CE marking safety standards with the input voltage 100 Vac to 240 Vac ±10%, 50 Hz/60 Hz,single-phase.
*The product is designed to be installed in the customer's system so as to meet the requirements of CE marking regarding chassis mounting, noise control, proper protections, and isolated devices. It is not designed to perform alone.
• 交流输入电缆：Standard
CABLE TYPE1
Rated voltage: 125 V
Maximum current: 10 A
(For Japan or North America)
2.5 meters
Standard
with -L(230V) option
CABLE TYPE3
Rated voltage: 250 V
Maximum current: 10 A
(For Europe)
2.5 meters
Sold separately
with -L(230V) option
CABLE TYPE4
Rated voltage: 250 V
Maximum current: 10 A
(For Europe)
2.5 meters
Select the appropriate AC input cable for your operating environment and region. For cable types not listed below, customers must provide their own compatible cables.
• 高压 output cable：Standard
CN-40-AHVP
1.5 meters length
Standard with -L(5m) option
CN-40-AHVP(5)
5 meters length
* Standard cable length is 1.5 meters. For 5 meter length, suffix(5) to the model number.
Example CN-120AR-MHVP(5)
For more details, refer to the CN series.
资源下载
以上规格取自松田精密（Matsusada Precision）官网 AMS 系列产品页（https://www.matsusada.com/product/high-voltage-amplifiers/high-voltage-amplifiers/ams/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
松田精密官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售模式
Matsusada Precision Inc. 全球直销，不设授权代理商（官方 FAQ 明示 direct sales system）
• 全球咨询 +81-6-6150-5088
• 传真 +81-6-6150-5089
• 在线询价
https://www.matsusada.com/support/contact/
• 官网 https://www.matsusada.com/
全国办事处
美国办事处（北卡罗来纳）
• 电话 +1 (704) 496-2644
• 传真 +1 (704) 496-2643
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758