ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

把 z8653 VSA 扩展到 20GHz 的射频下变频模块组,无镜像架构、基波抑制通路,20GHz 全扫 1.5 秒内完成。
300MHz 差分 I/Q 数字化仪,双 ADC 400MS/s 同步采样、162.5MHz 无混叠带宽,内置实时 DDC 与 512MiB 存储。

同厂商产品

M9195B 收发一体仪 250MHz|是德科技 (在产)

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

是德科技|KEYSIGHT
PXIe 数字激励-响应模块,250 MHz,16 通道
PXI 模块化射频矢量收发信机
产品简介
M9195B PXI 数字激励/响应模块为 IC 设计测试环境提供灵活的数字输入/输出控制或同步动态数字控制
核心参数
• 模块类型:数字激励-响应
• 插槽数:1
• 带宽:250 MHz
• 类型:System Module
• 形态:PXIe 模块
• 连接方式:PXI
功能特性
• 产品亮点
每通道可编程激励/响应补偿延迟
实时比较
最多 12 个模块(192 通道)的多模块同步
外部触发与标记
资源下载
以上内容与指标均取自是德科技(KEYSIGHT)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库

 

 

是德科技 | KEYSIGHT
M9195B 收发一体仪 250MHz 详细指标
Modular PXI RF Vector Transceivers
一、技术规格
术语定义和条件
The warranted performance of a calibrated instrument that has been stored for a minimum of 1 hour
within the operating temperature range of 0 to 45 °C and after a
30-minute warm up period. All
specifications account for the effects of measurement and calibration-source uncertainties and were
created in compliance with ISO-17025 methods. In addition, a driver session must be opened to
initialize the power supplies. This can be done programmatically or by opening SFP and connecting to
the instrument. Data published in this document are specifications (spec) only where specifically
The characteristic performance, which 80% or more of manufactured instruments will meet. This data
is not warranted, does not include measurement uncertainty or calibration-source, and is valid only at
room temperature (approximately
25°C).
标称值 (nom)
条件:and applies room temperature (approximately 25°C). Data represented in this document are nominal
The mean or average characteristic performance, or the value of an attribute that is determined by
design such as a connector type, physical dimension, or operating speed. This data is not warranted
Measured (meas)
条件:such as amplitude drift vs. time. This data is not warranted and is measured at room temperature
An attribute measured during the design phase for purposes of communicating expected performance,
(approximately
25°C).
Additional Information
条件:performance within the operating temperature range unless otherwise noted. The data contained in
All data are measured from multiple units at room temperature and are representative of product
this document is subject to change
To ensure proper cooling, use Keysight slot blockers (Y1212A), filler panels (Y1213A), and the air
inlet module kit (Y1 214A) in the chassis when there are empty slots. Keysight chassis and filler
二、模块规格
Bus interface and compatibility PXIe peripheral module (x8 Gen
2)
Number of slots
1
Number of data/PPMU channels per module 16 (channels can either be configured as data or as
Number of high voltage channels
4
编号 auxiliary 开路 drain 通道
Number of sites per module One 16 channel or four
4 -channel sites (opti on
Maximum data rate
250 Mbps (option dependent)
Maximum RTZ clock on data channels
250 MHz (option dependent)
Module memory (option dependent) Up to 2 GB (allocated between pattern, response capture
and sequence control)
Maximum number of s ynchronized modules
12 (requires option MMS)
Maximum number of synchronized channels
192 (requires option MMS)
前面板面板连接器
Data, open drain, HV, PPMU sense ERCD30
Multi-module sync ERCD10
Sync in/out (SYNC) SMB connector
Trigger in/marker out (GPIO1/2) SMB connector
Mechanical (nom)
Size
3U/1-slot PXIe standard
130.1 x 21.7 x
210 mm; includes connectors and handle
Weight
482g (1.1 lbs)
DC supply current
+3.3V 3.0 A
4.5 A
+12V 2.8 A
3.2 A
Power dissipation
Total power dissipated 44 W
53 W
三、Data 通道规格
特性值备注
Number of data channels
16
Maximum pattern memory
125 Mvectors per channe l Option dependent
Channel type Single-ended, ground reference
Channel impedance
50 Ω Nominal
Direction control (In, Out, In/Out) Per channel, per cycle (period)
Per cycle digital states 2 drive states
1 receive state
Programmable drive states Force high, force low, force terminate
Terminate state either drives active termination or is high-Z with reflection clamps
Programmable receive states Compare high, compare low, compare three-state, compare off
Three-state: a signal level between receive high and receive low thresholds
Programmable 电压设置 Per 通道
Drive/receive voltage range
–1.5 V to +6.5 V1
(16-bit with 152 μV resolution)
VIH − VIL ≥
100 mV
VIL (–1.5 V to +6.4 V)
VIH (–1.4 V to +6.5 V)
Drive voltage accuracy
±25 mV (VIH & VIL)
DUT centric (spec)
DUT centric. Maximum accuracy from ±5 °C of AutoCorrection
Receive voltage accuracy
±20 mV (VOH & VOL)
DUT centric (spec)
条件:Channel output short circuit current limit ±75 mA, nominal Maximum of 250 mA per module in
DUT centric. Hysteresis off. Maximum accuracy from ±5 °C of AutoCorrections
通道功率-开 state 高-Z
Receive hysteresis settings 0 mV, 50 mV
100 mV
Channel jitter <25 ps RMS Typical. EPR2 =
1 ns
Channel to channel jitter <25 ps RMS Typical. EPR1 =
1 ns
通道上升时间
@1 V pp
@3 V pp
@6 V pp
<450 ps
<700 ps
<1250 ps
At module connector into 50 Ω
20-80%
通道下降时间
@1 V pp
@3 V pp
@6 V pp
<450 ps
<700 ps
<1250 ps
At module connector into 50 Ω
20-80%
Receive-仅, 低 leakage 模式
Bi-directional channel ±6 nA ±1.5 nA (spec)
±2 μA
典型值. Static 或 dynamic 数字模式
条件:Typical. Static or dynamic digital mode 1 Drive voltage range applies to open circuit. Voltage range will be ½ stated range if driving a 50 Ω load 2 EPR = Edge Placement Resolution 3 The following conditions apply: 0 °C - 30 °C operating range, ±2 °C of measure leakage current, 250 mV
Dynamic digital mode only3
of measure leakage voltage (±1 V range)
特性值备注
Active termination range
–1.5 V to +6.5 V
(16-bit with 152 μV resolution)
50 Ω terminated into VIT
Active termination accuracy
±25 mV (VIT) (spec) Maximum accuracy from ±5 °C of AutoCorrections
Active load range (IOH & IOL)
0 mA to 25 mA
(16-bit with 762 nA resolution)
Maximum of 250 mA per module in combination with
other channels Active load accuracy
±0.40 mA (IOH & IOL) Characteristic accuracy from ±5 °C of AutoCorrections
Commutation voltage range
–1.5 V to +6.5 V
–1 V to +5.5 V
| IOL & IOH | ≤
1 mA
| IOL & IOH | ≤ 25 mA Commutation voltage accuracy
±20 mV (VCOM) Characteristic accuracy from ±5 °C of AutoCorrections
Reflection clamp range
–2 V to +7 V
(16-bit with 152 μV resolution)
VCH − VCL >
0.8 V
VCL (–2 V to +6.2 V)
VCH (–1.2 V to +7 V)
Reflection clamp accuracy (VCH & VCL)
@ 1 mA
@ 10 mA
@ 25 mA
±30 mV
±200 mV
±400 mV
50 Ω source impedance into clamps. Characteristic
accuracy from ±5 °C of AutoCorrections neglecting
四、高电压通道规格
特性值备注
Number of high voltage channels
4
Channel control Shared with dependent data channel HV20 shared with CH
02
HV21 shared with CH
06
HV23 shared with CH
10
HV24 shared with CH
14
Channel impedance
<10 Ω (when forcing to terminate)
50 Ω (when forcing High or Low)
Channel power-on state Passive
50 Ω termination
Maximum data rate
10 MHz
Programmable 电压范围设置 Per 通道
HV drive range
0 V to +13.5 V
(16-bit with 305 μV resolution)
Force terminate
HV drive accuracy
±40 mV (VHH) (spec) Maximum accuracy from ±5 °C of
Drive voltage range
–0.1 V to +6.5 V
(16-bit with 152 μV resolution)
Force 高或低
Drive voltage accuracy
±35 mV (VIH & VIL) (spec) Maximum accuracy from ±5 °C of
HV drive settling time < 4 μs @ 13.5 V pp into
1 M Ω (1nF)
< 350 μs @ 13.5 V pp into
1 M Ω (1nF)
Settled to 1% of final value
Drive 上升时间
@ 1 V pp
@ 3 V pp
@ 6 V pp
<9 ps
<10 ps
<11 ps
Into 50 Ω
20-80%, Typical
Drive 下降时间
@ 1 V pp
@ 3 V pp
@ 6 V pp
<9 ps
<10 ps
<11 ps
Into 50 Ω
20-80%, Typical
五、开路 Drain 通道规格
特性值备注
Number of open drain channels
4
通道类型输出仅, single-ended, 地 referenced
条件:Sink current per channel 1 A max Nominal
Channel termination Open drain Internal
10k Ω pull-up to +5 V
Channel power-on state Off
10k Ω pull-up to +5 V
Maximum working voltage +
12 Vdc
六、GP-IO Specifications
特性值备注
Number of GP-IO channels 2 Trigger In/Marker Out (GPIO
1/2 SMB)
Direction control Per channel
Channel input impedance
50 Ω or 10 kΩ Software selectable, DC coupled
Programmable threshold setting Per channel
Input voltage range –2 to +
5 V
Programmable input threshold –2 to +
5 V
Input threshold accuracy ±100 mV
10 kΩ input impedance
Input minimum pulse width
16 ns
Input rate DC to 30 MHz
Channel output impedance
50 Ω Marker
Output voltage
3.3 V max (into high-Z)
1.65 V max (into
50 Ω)
条件:Source/sink current per channel ± 64 mA Nominal
Output rate DC to 100 MHz
Output rise / fall time <3 ns Typical into 50 Ω
20%-80%
七、PPMU Specifications
通用特性值备注
Number of PPMU channels
16
测量平均模式
None, 64 averages, 50 Hz one PLC
60 Hz
one PLC
Measurement setup time
1 ms Time to first measurement
Measurement speed
250 µs per channel After setup time
Channel leakage
±10 nA Typical
Remote sense
16 channels
1 GND
Ground sense should be tied to ground at measurement location for maximum accuracy
Remote sense leakage
±4 nA Typical
Force/Measure 电压值备注
Force voltage accuracy
±10 mV (spec) Maximum accuracy from ±5 °C of
AutoCorrections. Ground sense tied to ground
Measure voltage accuracy
±10 mV (spec) With remote sense. Maximum accuracy
from ±5 °C of AutoCorrections with one
PLC averaging at sense location. Ground sense tied to ground
Force voltage stability Stable at all ranges into
1 μF Larger load capacitance possible, but
Force 电压范围
| Current | ≤
4 mA
| Current | ≤
25 mA
| Current | ≤
40 mA
–2 V to +6.5 V
–2 V to +6 V
–2 V to +5.75 V
152 μV resolution
Force voltage settling time 40 and 1 mA ranges 100 μA range
10 μA range
2 μA range
< 20 μS
< 25 μS
< 100 μS
< 525 μS
1 V rising and falling step settled to 1% of
final value into 1 MΩ/
1nF load. Typical
Force/Measure 电流值备注
Force current accuracy
±1% of range (spec) Maximum accuracy from ±5 °C of
AutoCorrections. Remote sense disconnected
Measure current accuracy
±1% of range (spec) Maximum accuracy from ±5 °C of
Force 电流建立时间 Dependent 开 load
Force current voltage clamp range
–2 V to +6.5 V
(16-bit with 152 μV resolution)
VCH > VCL
VCL (–2 V to +4 V)
VCH (0 V to +6.5 V)
Force current voltage clamp accuracy
±50 mV Characteristic accuracy from ±5 °C of
电流范围和分辨率
–40 mA to +
40 mA
–1 mA to +
1 mA
–100 μA to +
100 μA
–10 μA to +
10 μA
–2 μA to +
2 μA
2.44 μA
61 nA
6.1 nA
610 pA
122 pA
Maximum of 250 mA per module in
以上指标摘自厂家官方数据手册,完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库

全部

 

是德科技官方渠道


官方渠道(官网 / 热线 / 邮箱)


• 销售服务热线

800-810-0189(座机)/400-810-0189(手机) 工作时间 周一至周五 8:30-17:30


• 热线传真

800-820-2816(座机)/400-820-3863(手机)


• 亚洲区支持邮箱 tm_asia@keysight.com


• 服务与支持邮箱

instruments_services@keysight.com


• 官网

www.keysight.com(中国站 www.keysight.com.cn)


全国办事处


• 北京总部

是德科技(中国)有限公司 北京市朝阳区望京北路3号

电话:(010) 64397888

传真:(010) 64390278

邮编:100102


• 上海分公司

上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼

电话:(021) 36127688

传真:(021) 36127188

邮编:200080


• 广州分公司

广州市天河北路233号中信广场66层07-08室

电话:(020) 38113988

传真:(020) 86695074

邮编:510613


• 深圳分公司

深圳市福田中心区福华一路六号免税商务大厦3楼

电话:(0755) 83079588

传真:(0755) 82763181

邮编:518048


• 成都分公司

成都高新区南部园区天府四街116号

电话:(028) 83108888

传真:(028) 85330830

邮编:610041


• 西安分公司

西安市碑林区南关正街88号长安国际大厦D座5/F

电话:(029) 88867770

传真:(029) 88861330

邮编:710068


• 中国香港

是德科技香港有限公司 中国香港北角电气道169号25楼

电话:(852) 31977777

传真:(852) 25069292 香港热线 800-938-693


• 维修 / 校准服务中心

中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189


授权分销商


• 上海信果电子科技有限公司(上海)

上海市沪闵路8075号虹梅商务大厦6楼609室

邮编:200233

电话:021-64518399

传真:021-54560890

邮箱:jason.wu@signalgroup.com.tw

官网:www.signalgroup.com.cn


• 上海精测电子有限公司(上海)

上海市北京东路668号西楼15E

邮编:200001

电话:13916371522

传真:021-53086102

邮箱:yangzhen@jingce.com

官网:www.jingce.com


• 北京东方中科集成科技股份有限公司(北京)

北京市海淀区复兴路69号院12号楼2层、7层 邮政编码:100039

邮编:100039

电话:400-650-5566

传真:010-68728001

邮箱:zhangzp@oimec.com.cn

官网:www.dfzk.com/br_keysight.html


• 北京千聚科技发展有限公司(北京)

北京市海淀区西三旗花园雪梨澳乡A区23-4号

邮编:100085

电话:010-82907162

邮箱:zhuqihui@qianjukeji.com.cn

官网:www.qianju.net.cn


• 北京金龙翌阳科技发展有限公司(北京)

北京市海淀区大柳树路17号富海大厦2001室

邮编:100086

电话:010-62167379/6213538

邮箱:zhy@yy17.com

官网:www.yy17.com


• 厦门同昌源电子有限公司(厦门)

厦门市湖里区悦华路215号综合楼二楼C单元

邮编:361000

电话:0592-5663715

传真:0592-2236795

邮箱:tcydz@xmtcy.com

官网:www.xmjns.com


• 合肥新普仪测科技有限公司(合肥)

安徽省合肥市长江路53号长江大厦1102室

邮编:230001

电话:+86(0551)65177518 ext:

传真:+86(0551)6260 7155

邮箱:hfsimple@mail.hf.ah.cn

官网:www.hfxp.com.cn


• 品展国际贸易(上海)有限公司(上海)

上海外高桥保税区泰谷路18号1号楼1105A室

邮编:200003

电话:+86(0512) 6808 6023

传真:+86(0512) 6808 6025

邮箱:melody@chtek.com.tw

官网:chtek.com.tw


• 广州康祺科技发展有限公司(广州)

广州市天河区华强路1号珠控国际中心8层06单元

邮编:510623

电话:020-38295200

传真:020-38295122

邮箱:baobao@kontchi.com

官网:www.kontchi.com


• 广州科欣仪器有限公司(广州)

广州市黄埔区黄埔大道933号209室

邮编:510700

电话:86-20-38699788

传真:86-20-34395932

邮箱:cs@gzkexin.com.cn

官网:www.gzkexin.com.cn


• 成都安诚迅飞电子科技有限公司(成都)

成都市武侯区人民南路四段27号1栋1单元 24层3号

邮编:610041

电话:028-86027579

邮箱:jincai.he@ancentest.com

官网:www.ancentest.com


• 新亚制程(浙江)股份有限公司(深圳)

深圳市福田区中康路卓越城梅林中心广场(北区)一期1栋3楼

邮编:518035

电话:0755-23818536

传真:0755-23818625

邮箱:wangrongbin@sunyes.cn

官网:www.sunyes.cn


• 无锡市邦达测量科技有限公司(无锡)

江苏省无锡市新区长江北路112号

邮编:214028

电话:0510-85258521 ext:

邮箱:bdyiqi@bdyiqi.com

官网:www.bdyiqi.com


• 武汉力德仪测科技有限公司(武汉)

武汉市光谷大道54号国际企业中心四期A座501室

邮编:430074

电话:027-85481090 ext:

邮箱:liuyang@leader-e.com

官网:www.leader-e.com


• 苏州工业园区贝奇仪器有限公司(苏州)

苏州工业园区通园路398号海逸大厦A402室

邮编:215006

电话:0512-62883832

邮箱:szbeiqi@szbeiqi.net

官网:www.szbeiqi.net


• 青岛鲁芯仪器有限公司(青岛)

青岛市福州北路135号鼎都1号写字楼328室

邮编:266007

电话:15953279543

传真:0532-80669058-830

邮箱:gaochangyuan@qdluxin.com

官网:www.qdluxin.com


• Avnet Electronics Marketing(Phoenix)

2211 South 47th Street

邮编:85034

电话:+65 6289 9164

邮箱:Josephine.Cheong@avnet.com

官网:OnlineSupportAsia@Avnet.com


• RFMW, Ltd.(San Jose)

188 Martinvale Lane

邮编:95119

电话:#09-129

邮箱:sales@rfmw.asia

官网:www.rfmw.com


• 沈阳实拓科技有限公司(沈阳)

沈阳市和平区三好街35号8层

邮编:110004

电话:024-23843636

传真:024-23905232

邮箱:lf@shituokeji.cn

官网:www.shituokeji.cn


• 領先科儀有限公司(香港)

新界荃灣海盛路3號TML廣場21樓B5室

邮编:.

电话:852-31523600

传真:852-31523608

邮箱:allenma@advanceinst.com

官网:www.advanceinst.com


租赁合作伙伴


• 深圳君鉴科技股份有限公司(深圳市)

光明街道观光路华强创意产业园3栋B座12楼光明新区

邮编:518107

电话:400-860-3035

邮箱:shichang@chrent.com

官网:www.chrent.com


• 益莱储(北京)检测设备租赁有限公司(北京市)

来广营高科技产业园区4号楼3层301朝阳区

邮编:100102

电话:400-819-2800

邮箱:jim.chen@electrorent.com

官网:www.electrorent.com/cn


• 北京东方中科集成科技股份有限公司科技租赁事业部(北京市)

北京市海淀区阜成路67号银都大厦12层

邮编:100142

电话:400-650-5566

传真:010-68728001

邮箱:wangml@oimec.com.cn

官网:www.dfzk.com/rent


• 客而禧设备租赁(上海)有限公司(Shanghai)

徐汇区古美路1515号19号楼903室

邮编:201102

电话:021-54453166

邮箱:krc@krcchina.com

官网:www.krcchina.com


• 深圳市瑞普高电子有限公司(深圳市)

天安云谷产业园一期3栋D座1505-1506龙岗区

邮编:518129

电话:0755-29050100

邮箱:rickluo@ruipugao.com

官网:www.ruipugao.com


• 苏州锦凡精密仪器科技有限公司(苏州)

苏州市高新区滨河路625号创业大厦5幢505

邮编:215011

电话:18914031336

邮箱:18914031336@jfsz.net


解决方案合作伙伴


• Tokyo Weld Co., Ltd.(Ota-ku)

2-28-1 Kitamagome

邮编:143-0021

电话:81-3-3775-4331

传真:81-3-3775-4359

邮箱:d-imai@tokyoweld.com

官网:www.tokyoweld.com


• 上海恒榉电子科技有限公司(Shanghai)

上海市奉贤区南桥镇西闸公路1036号3栋2层

邮编:201401

电话:18112779808

邮箱:salesvalue@everise-hj.com

官网:everise-hj.com


• 佳燁科技股份有限公司(Ghiatek)(桃園市龜山區)

光明街243巷2號

邮编:33372

电话:+886-3-350-9960

传真:+886-3-320-3475

邮箱:support@ghiatek.com

官网:www.ghiatek.com.tw


• 华美博科技(北京)有限公司(北京市)

蓝靛厂东路2号金源时代商务中心C座9A2海淀区

邮编:100097

电话:010-88598732

邮箱:sino@sino-microtech.com

官网:www.sino-microtech.com


• 和创联合科技(北京)有限公司(北京市)

中关村东路18号财智国际大厦A座1612海淀区

邮编:100083

电话:400 650 7802

邮箱:info@hisuntest.com

官网:www.hisuntest.com


• 昆山捷得立电子有限公司(昆山市)

登云路288号海创大厦C座25楼

邮编:215316

电话:0512-36831748

邮箱:sales@jiedeli-china.com

官网:www.jiedeli-china.com


• 深圳市捷泰普科技有限公司(深圳市)

宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室

邮编:518126

电话:0755-83908488

邮箱:sales@jtptech.cn

官网:www.jtptech.cn


• 深圳市易捷测试技术有限公司(深圳市)

福虹路9号世贸广场C座1203室福田区

邮编:518033

电话:0755-83698930

邮箱:dongni.zhang@gbit.net.cn

官网:gbit.net.cn


• 深圳市泰仕捷科技有限公司(深圳市)

松岗大道7号汉海达大厦616室宝安区

邮编:518105

电话:0755-27128586

邮箱:riky.gua@tesijet.com

官网:www.tesijet.com


• 深圳市蓉声科技有限公司(深圳市)

福中路海连大厦连天阁 1103 室福田区

邮编:518033

电话:13828880571

邮箱:jiang.qian@radiation-test.com

官网:www.radiation-test.com


• 苏州伊欧陆系统集成有限公司(苏州)

星湖街218号生物纳米园A7楼305室苏州工业园区

邮编:215000

电话:4008808776

邮箱:info@eoulu.com

官网:www.eoulu.com


• EM Labs Inc.(Kobe)

1-4-13 Mizukasadori, Nagata

邮编:653-0842

电话:+81-50-5370-0262

邮箱:info@emlabs.jp

官网:www.emlabs.jp


• MPI Corporation(Chupei)

No. 155 Chungho Street

邮编:302

电话:+886-3-555-1771

传真:+886-3-551-8381

邮箱:info@mpi-corporation.com

官网:www.mpi-corporation.com/ast


• NOFFZ(Tönisvorst)

Vorster Strasse 238

邮编:47918

电话:+49 2151-99878-0

邮箱:info@noffz.com

官网:www.noffz.com


• Power Technology Solutions(Santa Clara)

3048 Scott Blvd

邮编:95054

电话:650-308-8091 ext:

传真:408-727-0827

邮箱:inquiries@pwrts.com

官网:www.pwrts.com


• Resillion(Hasselt)

Kempische Steenweg 303

邮编:3500

电话:+32 498 92 01 71

邮箱:global-ci-sales@resillion.com

官网:www.resillion.com


• Suzhou Link Ways Tech Co., Ltd.(Suzhou)

16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP

邮编:215021

电话:+86 512 6602 8998


• 上海凌测电子科技有限公司(上海)

峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区

邮编:200127

电话:021-61090608

邮箱:yue.lin@merlintest.com.cn

官网:www.merlintest.com.cn


• 上海北汇信息科技有限公司(上海市)

秀路100号虹桥总部1号4号楼3C闵行区紫

邮编:201103

电话:021-34716271

邮箱:info@polelink.com

官网:polelink.com


• 上海怿星电子科技有限公司(上海市)

钦州北路1199号智汇园87号楼5F室徐汇区

邮编:200233

电话:021-64955659

邮箱:biz@e-planet.cn

官网:www.e-planet.cn


• 东昇电磁兼容技术(深圳)有限公司(深圳市)

福田中心区26-3路中国凤凰大厦2栋25G

邮编:518026

电话:0755-82792411

邮箱:sales@jstoyo.cn

官网:www.jstoyo.cn


• 南京派格测控科技有限公司(南京市)

建邺区建邺人才服务大厦16楼

邮编:210019

电话:4008920858

邮箱:sales@pgtec.cn

官网:pgtec.cn


• 南京纳特通信电子有限公司(南京市)

江宁开发区临淮街20号

邮编:210012

电话:025-84471796

邮箱:sales@rflight.cn

官网:www.rflight.cn


• 深圳市研辰科技有限公司(深圳市)

益田路3008号皇都广场C座2815室福田区

邮编:518048

电话:0755-82828703

邮箱:roger_huang@ascentest.com

官网:www.ascentest.com


原厂翻新与二手仪器


• 是德科技原厂二手仪器商城(Keysight Certified Pre-Owned):www.keysight.com/used/cn/zh/


• 原厂翻新仪器经与新品相同的最终测试与校准,原厂保修最长 5 年;享 40%–90% 折扣,另有线上 5% / 教育 15% 优惠


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答