ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
ML系列是马格纳电源（Magna-Power）的水冷落地式大功率可编程直流电源，提供500kW与1,000kW两种基础功率单元，可扩展至10MW以上，共38个机型，输出电压100Vdc至6000Vdc。
ALx系列是马格纳电源（Magna-Power）MagnaLOAD系列的直流电子负载，采用传统线性MOSFET耗散元件，可在机型最大功率额定值内实现很宽的电压—电流工作区。系列共27个机型，功率覆盖1.
PXT是菊水（KIKUSUI）的大容量宽范围直流电源系列，在3U机箱内提供20kW额定输出，电压量程覆盖500V、1000V、1500V三档，可选三相三线200V或400V输入。系列采用2.25至3倍功率比的功率型工作区设计，额定功率内电压与电流可大范围组合（PXT20K-500可从500V-40A运行到166.6V-120A），50°C环境温度下满载连续运行，标配LAN、USB、RS232C与隔离型外部模拟控制，并具备可变内阻、Bleeder通断、序列、I-V特性等功能，最多25台并联可扩展至500kW。
同厂商产品
AK-80P50 是松田精密（Matsusada Precision）AK 系列的一款直流电源，最大输出电压 80kV，最大输出电流 50mA，最大输出功率 4kW。 Rack-mount CV/CC High Voltage Power Supply The AK series consists of high-performance high-voltage power supplies delivering up to 120 kV and 6.
AK-80P37.5 是松田精密（Matsusada Precision）AK 系列的一款直流电源，最大输出电压 80kV，最大输出电流 37.5mA，最大输出功率 3kW。 Rack-mount CV/CC High Voltage Power Supply The AK series consists of high-performance high-voltage power supplies delivering up to 120 kV and 6.
AK-70P90 是松田精密（Matsusada Precision）AK 系列的一款直流电源，最大输出电压 70kV，最大输出电流 90mA，最大输出功率 6.4kW。 Rack-mount CV/CC High Voltage Power Supply The AK series consists of high-performance high-voltage power supplies delivering up to 120 kV and 6.
- «
- 1
- »
AK-6P670 6kV/670mA直流电源 4kW|松田精密 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
AK-6P670 直流电源
CV/CC Programmable高压直流电源 6kV / 670mA / 4kW
产品简介
AK-6P670 是松田精密（Matsusada Precision）AK 系列的一款直流电源，最大输出电压 6kV，最大输出电流 670mA，最大输出功率 4kW。
Rack-mount CV/CC High Voltage Power Supply
The AK series consists of high-performance high-voltage power supplies delivering up to 120 kV and 6.4 kW in a standard 19-inch rack configuration. With a lineup of over 100 models, the series allows users to select the optimal specification for their application, balancing performance and cost efficiency.
Featuring low ripple noise and high stability, the AK series includes extensive remote control capabilities and comprehensive protection circuits, ensuring safe, reliable, and easy operation in demanding environments.
The AK series is an excellent choice for insulation breakdown and withstand voltage testing of electrical components—such as IGBTs and circuit breakers—used in next-generation power distribution and smart grid systems.
核心参数
• 最大输出电压 [kV]：6 kV
• 电流：670 mA
• 功率 [kW]：4.0 kW
• 重量 [约]：25 kg
• 输入电压：208 Vac ±10％ (187.2 to 228.8 Vac), 50/60 Hz, Three-phase
• 输出电压控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
• 输出电流控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
资源下载
以上内容与指标均取自Matsusada Precision 官网产品页与官方数据手册，未标注口径的为厂家公布值。
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
AK-6P670 直流电源 详细指标
CV/CC Programmable高压直流电源 6kV / 670mA / 4kW
详细指标
以下指标取自松田精密（Matsusada Precision）官网 AK 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• 最大输出电压 [kV]：6 kV
• 电流：670 mA
• 功率 [kW]：4.0 kW
• 重量 [约]：25 kg
系列共用规格
• 输入电压：208 Vac ±10％ (187.2 to 228.8 Vac), 50/60 Hz, Three-phase
• 输出电压控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
• 输出电流控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
选件 / 附件
• -LF * 1：Floating Ground
Isolates the high-voltage return from the chassis ground (50 V max).
Note: When using this feature, all equipment connected to the remote control connector (TB1) must be at floating ground potential. (This option is not compatible with current flow measurement to the load or floating high-voltage power supplies.)
FAQ: What is floating ground?
• -LMs * 1 * 2：Parallel operation mode
One primary unit can control up to two Boosters (replicas) units
(sum of maximum rating output must be under 18 kW)
• -LOc * 2：Overcurrent protection with shutdown
• -LW * 1：Slow Start (Ramp Start)
Ramps the output voltage to the maximum rated value over approximately 10 seconds after enabling the output.
(Reaches half of the maximum rated voltage in approximately 5 seconds.)
• -L(200V)：Input voltage 200 Vac ±10%, three-phase
(Input current: approx 105% of AC 208 Vac)
• -L(220V)：Input voltage 220 Vac ±10%, three-phase
(Input current: approx 95% of AC 208 Vac)
• -L(230V)：Input voltage 230 Vac ±10%, three-phase
(Input current: approx 90% of AC 208 Vac)
• -L(400V)：Input voltage 400Vac ±10%, three-phase
[Input current] 3.0 kW/3.2 kW: 5.5 A typ, 4.0 kW: 8 A typ, 4.6 kW: 8.5 A typ, 6.0 kW/6.4 kW: 11 A typ
• -L(3m)：The length of the shielded high voltage output cable is changed to 3 meters.
• -L(5m)：The length of the shielded high voltage output cable is changed to 5 meters. (only for ≤40 kV models)
• -L(7m)：The length of the shielded high voltage output cable is changed to 7 meters. (only for ≤15 kV models)
• 输入电缆：Sold separately 4 kW or less models
CABLE TYPE6
600 Vac / 25 A
2.5 meters ※1 -->
Sold separately 6.4 kW model
CABLE TYPE7
600 Vac / 75 A
2.5 meters ※1 -->
For details, refer to the CABLE series page.
• 输出电缆：Standard
3 kV to 15 kV models (3 kW, 4 kW models)
3.6 kV to 15 kV models (6.4 kW models)
CN-15-MHVP
2.5meters (Specified length available)
Standard
20 kV to 30 kV models
CN-30-MHVP
2.5meters (Specified length available)
Standard
40 kV models
CN-45-MHVP
2.5 meters
(Specified length available)
Standard
50 kV to 60 kV models
CN-60-MHVP
2.5 meters
(Specified length available)
Standard
2 kV or less models (3 kW models, 4 kW models)
3 kV or less models (6.4 kW models)
CN-15PR-MHVP
2.5 meters
Standard
70 kV or more models
CN-120AR-MHVP
2.5 meters
For details, refer to the CABLE series page.
• 光学 Communication adapter：Optical isolation adapters, utilize fiber optic cables for digital communication, which enables extremely reliable communication even in noisy environments such as in factories and for long-distance control.
By using optical fibers, they are electrically isolated, so safe operation is possible even in power supply configurations with potential differences.
For details, refer to the CO/USB series
Example of communication with optical fiber
Order both CO-E32 and CO-HV (with CO-AU cables) together.
• 应用软件：PSS2en series: Remote control, Test workflow design, and Data logging
PSS2en is the dedicated software that can actuate various power supplies, electronic loads, and digital controllers for power supplies manufactured by Matsusada Precision Inc. with a simple setup.
It is perfect for the aging test, the burn-in test, and the withstand voltage test for electronic parts, as well as for the endurance test, intermittent/continuous operation test, or various simulation tests for automobile electric components.
Click here for the PSS2en series
资源下载
以上规格取自松田精密（Matsusada Precision）官网 AK 系列产品页（https://www.matsusada.com/product/high-voltage-power-supplies/rack-mount/ak/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758