ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
ML系列是马格纳电源（Magna-Power）的水冷落地式大功率可编程直流电源，提供500kW与1,000kW两种基础功率单元，可扩展至10MW以上，共38个机型，输出电压100Vdc至6000Vdc。
ALx系列是马格纳电源（Magna-Power）MagnaLOAD系列的直流电子负载，采用传统线性MOSFET耗散元件，可在机型最大功率额定值内实现很宽的电压—电流工作区。系列共27个机型，功率覆盖1.
PXT是菊水（KIKUSUI）的大容量宽范围直流电源系列，在3U机箱内提供20kW额定输出，电压量程覆盖500V、1000V、1500V三档，可选三相三线200V或400V输入。系列采用2.25至3倍功率比的功率型工作区设计，额定功率内电压与电流可大范围组合（PXT20K-500可从500V-40A运行到166.6V-120A），50°C环境温度下满载连续运行，标配LAN、USB、RS232C与隔离型外部模拟控制，并具备可变内阻、Bleeder通断、序列、I-V特性等功能，最多25台并联可扩展至500kW。
同厂商产品
AKP-60P210 是松田精密（Matsusada Precision）AKP 系列的一款直流电源，最大输出电压 60kV，最大输出电流 210mA，最大输出功率 12.6kW。 The AKP series is a high-performance rack-mount power supply designed for demanding applications requiring both high voltage and high power.
AKP-5P2600 是松田精密（Matsusada Precision）AKP 系列的一款直流电源，最大输出电压 5kV，最大输出电流 2.6A，最大输出功率 13kW。 The AKP series is a high-performance rack-mount power supply designed for demanding applications requiring both high voltage and high power.
AKP-50P260 是松田精密（Matsusada Precision）AKP 系列的一款直流电源，最大输出电压 50kV，最大输出电流 260mA，最大输出功率 13kW。 The AKP series is a high-performance rack-mount power supply designed for demanding applications requiring both high voltage and high power.
- «
- 1
- »
AKP-4P3200 4kV/3.2A直流电源 12.8kW|松田精密 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
AKP-4P3200 直流电源
HIGH CURRENT 高压直流电源 4kV / 3.2A / 12.8kW
产品简介
AKP-4P3200 是松田精密（Matsusada Precision）AKP 系列的一款直流电源，最大输出电压 4kV，最大输出电流 3.2A，最大输出功率 12.8kW。
The AKP series is a high-performance rack-mount power supply designed for demanding applications requiring both high voltage and high power. With a wide range of models from 1 kV to 120 kV, the series offers scalable solutions for industrial and research use. Through master-slave parallel connection, the system can be expanded up to 52 kW to meet higher power requirements.
核心参数
• 输出电压：4 kV
• 电流：3.2 A
• 功率：12.8 kW
• 输入电压：208 Vac, 50/60 Hz, Three-phase
• 输出电压控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
• 输出电流控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
资源下载
以上内容与指标均取自Matsusada Precision 官网产品页与官方数据手册，未标注口径的为厂家公布值。
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
AKP-4P3200 直流电源 详细指标
HIGH CURRENT 高压直流电源 4kV / 3.2A / 12.8kW
详细指标
以下指标取自松田精密（Matsusada Precision）官网 AKP 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• 输出电压：4 kV
• 电流：3.2 A
• 功率：12.8 kW
系列共用规格
• 输入电压：208 Vac, 50/60 Hz, Three-phase
• 输出电压控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
• 输出电流控制：[Local] 10-turn potentiometer on the front panel
[Analog remote] External control voltage 0 to 10 Vdc or external 5kΩ potentiometer
[Digital remote] Additional CO-HV adapter
选件 / 附件
• -LF：Floating ground (Withstand voltage: 50 Vdc) * 1
Allows for current measurement at the load potential.
Note: All external devices connected to the remote control connector (TB1) must be floated to the same potential. This option cannot be used to float the high-voltage chassis itself.
FAQ: What is floating ground?
• -LMs：Master-slave control * 1 * 2
Enables parallel operation. One master unit can control up to three slave units.
(Total maximum power: 52 kW)
• -LOc：Overcurrent protection with shutdown * 2
Automatically cuts off the output when an overcurrent is detected.
• -LPs：Setting value display
Displays the voltage/current setting values on the meter while the SET button on the front panel is pressed.
(The SET button is added with this option.)
• -LW：Slow start * 1
Ramps up the voltage to the maximum rated value over approximately 10 seconds after the output is turned on.
(Reaches half the rated voltage in approximately 5 seconds.)
• -L(200V)：200 Vac ±10%, 3-phase Input
(Input current: approx. 105% of the 208 V model)
• -L(220V)：220 Vac, ±10%, 3-phase
(Input current: approx. 95% of 3-phase 208 V)
• -L(400V)：400 Vac, ±10%, 3-phase
(Input current 23 A typ.)
• -L(3m)：The length of shielded high voltage output cable is changed to 3 meters.
• -L(5m)：The length of shielded high voltage output cable is changed to 5 meters.
(Available only for the models with an output voltage of 40 kV or less)
• -L(7m)：The length of shielded high voltage output cable is changed to 7 meters.
(Available only for the models with an output voltage of 15 kV or less)
• 应用软件：PSS2en series: Remote control, Test workflow design, and Data logging
PSS2en is the dedicated software that can actuate various power supplies, electronic loads, and digital controllers for power supplies manufactured by Matsusada Precision Inc. with a simple setup.
It is perfect for the aging test, the burn-in test, and the withstand voltage test for electronic parts, as well as for the endurance test, intermittent/continuous operation test, or various simulation tests for automobile electric components.
Click here for the PSS2en series
资源下载
以上规格取自松田精密（Matsusada Precision）官网 AKP 系列产品页（https://www.matsusada.com/product/high-voltage-power-supplies/rack-mount/akp/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758